[lttng-dev] Error while building lttng-tools-2.9 from source for raspberry pi platform.

[abhishekk at uurmi.com]

Hi, 
    I am trying to build lttng tools version 2.9  form source for
my raspberry pi 3 B board, But i am ended up with some following
assembler error message while doing make.

/tmp/ccegcSiA.s: Assembler messages:
/tmp/ccegcSiA.s:1314: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:1333: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:1344: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:1721: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:1740: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:1751: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2108: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2127: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2138: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2494: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2513: Error: selected processor does not support ARM
mode `dmb ish'
/tmp/ccegcSiA.s:2524: Error: selected processor does not support ARM
mode `dmb ish'
I there any way to solve this issue, 
cat /proc/cpuinfo shows following result.

processor    : 1
model name    : ARMv7 Processor rev 4 (v7l)
BogoMIPS    : 38.40
Features    : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer    : 0x41
CPU architecture: 7
CPU variant    : 0x0
CPU part    : 0xd03
CPU revision    : 4

Thanks & Regards
Abhishek Kumar
7801078513 

-------------------------
Email sent using E-interact Webmail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.lttng.org/pipermail/lttng-dev/attachments/20170403/81f5a270/attachment.html>