[lttng-dev] Build a lttng environment on TizenIVI3.0 User-land

カオ ミン ヒェップ cm-hiep at jinso.co.jp
Thu Jun 19 21:16:49 EDT 2014


Hi Suchakra

Thanks for your replying!

On 06/19/2014 02:25 AM, Suchakrapani Datt Sharma wrote:
> Well, the kernel seems to have booted and started systemd. Its also for some
> reason starting and stopping udev (and failing to start it finally). Do you
> normally get these errors?
yes, I did. I always get these errors.

>   It would be good to have a look at log of normal
> boot and see if the errors occur after you make changes in menuconfig and are
> related to tracing being enabled or not.
I attached the log file of normal boot. Please see it.

> Also, your kernel command line says the console redirection should be on ttySC6.
> But in the very end of log,
>
> [ TIME ] Timed out waiting for device dev-ttySC6.device
> [DEPEND] Dependency failed for Serial Getty on ttySC6.
>
> If I am not mistaken, a .device file is supposed to be handled by udev, so I
> guess that may be the cause you are not getting the login prompt.

Best regards
Cao Minh Hiep.

-------------- next part --------------
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.25-ltsi (dhobsong at tyrell) (gcc version 4.7.3 20130205 (prerelea4
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=50c53c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: lager, model: Lager
debug: ignoring loglevel setting.
cma: CMA: reserved 256 MiB at 5e000000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c0460840, node_mem_map c0596000
  Normal zone: 1710 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 192850 pages, LIFO batch:31
  HighMem zone: 594 pages used for memmap
  HighMem zone: 66990 pages, LIFO batch:15
PERCPU: Embedded 7 pages/cpu @c0e9f000 s6400 r8192 d14080 u32768
pcpu-alloc: s6400 r8192 d14080 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
Kernel command line: console=ttySC6,115200 mem=1024M root=/dev/mmcblk0p2 rw early3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 1024MB = 1024MB total
Memory: 767984k/767984k available, 280592k reserved, 270336K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf800000 - 0xbfe00000   (   6 MB)
      .text : 0xc0008000 - 0xc03fea48   (4059 kB)
      .init : 0xc03ff000 - 0xc0422900   ( 143 kB)
      .data : 0xc0424000 - 0xc0461860   ( 247 kB)
       .bss : 0xc0461884 - 0xc05952b4   (1231 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
Architected local timer running at 10.00MHz (virt).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 10000kHz, resolution 100ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 )
pid_max: default: 32768 minimum: 301
Security Framework initialized
Smack:  Initializing.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
Setting up static identity map for 0x402a3a70 - 0x402a3abc
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (80.00 BogoMIPS).
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
dummy: 
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
sh-pfc pfc-r8a7790: r8a77900_pfc support registered
renesas_irqc renesas_irqc.0: driving 4 irqs
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
sh_cmt sh_cmt.0: used for clock events
Advanced Linux Sound Architecture Driver Version 1.0.25.
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource arch_sys_counter
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
highmem bounce pool size: 64 pages
NFS: Registering the id_resolver key type
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
jffs2: version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
msgmni has been set to 1483
io scheduler noop registered (default)
gpio_rcar gpio_rcar.0: driving 32 GPIOs
gpio_rcar gpio_rcar.1: driving 32 GPIOs
gpio_rcar gpio_rcar.2: driving 32 GPIOs
gpio_rcar gpio_rcar.3: driving 32 GPIOs
gpio_rcar gpio_rcar.4: driving 32 GPIOs
gpio_rcar gpio_rcar.5: driving 32 GPIOs
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
sh-sci.0: ttySC0 at MMIO 0xe6c40000 (irq = 176) is a scifa
sh-sci.1: ttySC1 at MMIO 0xe6c50000 (irq = 177) is a scifa
sh-sci.2: ttySC2 at MMIO 0xe6c20000 (irq = 180) is a scifb
sh-sci.3: ttySC3 at MMIO 0xe6c30000 (irq = 181) is a scifb
sh-sci.4: ttySC4 at MMIO 0xe6ce0000 (irq = 182) is a scifb
sh-sci.5: ttySC5 at MMIO 0xe6c60000 (irq = 183) is a scifa
sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184) is a scif
console [ttySC6] enabled
sh-sci.7: ttySC7 at MMIO 0xe6e68000 (irq = 185) is a scif
sh-sci.8: ttySC8 at MMIO 0xe62c0000 (irq = 186) is a hscif
sh-sci.9: ttySC9 at MMIO 0xe62c8000 (irq = 187) is a hscif
scsi0 : sata_rcar
ata1: SATA max UDMA/133 irq 137
scsi1 : sata_rcar
ata2: SATA max UDMA/133 irq 138
m25p80 spi0.0: s25fl512s (65536 Kbytes)
Creating 3 MTD partitions on "m25p80":
0x000000000000-0x000000040000 : "loader_prg"
0x000000040000-0x000000440000 : "user_prg"
0x000000440000-0x000004000000 : "flash_fs"
qspi qspi.0: probed
spi_sh_msiof spi_sh_msiof.1: master is unqueued, this is deprecated
spi_sh_msiof spi_sh_msiof.2: master is unqueued, this is deprecated
spi_sh_msiof spi_sh_msiof.3: master is unqueued, this is deprecated
spi_sh_msiof spi_sh_msiof.4: master is unqueued, this is deprecated
sh_mii: probed
Base address at 0xee700000, 2e:09:0a:00:3d:c8, IRQ 194.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform ehci-platform.0: Generic Platform EHCI Controller
ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
ehci-platform ehci-platform.0: irq 140, io mem 0xee081000
ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform ehci-platform.1: Generic Platform EHCI Controller
ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
ehci-platform ehci-platform.1: irq 144, io mem 0xee0a1000
ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-platform ehci-platform.2: Generic Platform EHCI Controller
ehci-platform ehci-platform.2: new USB bus registered, assigned bus number 3
ehci-platform ehci-platform.2: irq 145, io mem 0xee0c1000
ehci-platform ehci-platform.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform ohci-platform.0: Generic Platform OHCI Controller
ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4
ohci-platform ohci-platform.0: irq 140, io mem 0xee080000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-platform ohci-platform.1: Generic Platform OHCI Controller
ohci-platform ohci-platform.1: new USB bus registered, assigned bus number 5
ohci-platform ohci-platform.1: irq 144, io mem 0xee0a0000
ata2: link resume succeeded after 1 retries
ata1: link resume succeeded after 1 retries
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-platform ohci-platform.2: Generic Platform OHCI Controller
ohci-platform ohci-platform.2: new USB bus registered, assigned bus number 6
ohci-platform ohci-platform.2: irq 145, io mem 0xee0c0000
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-rcar i2c-rcar.0: probed
i2c-rcar i2c-rcar.1: probed
i2c-rcar i2c-rcar.2: probed
i2c-rcar i2c-rcar.3: probed
lirc_dev: IR Remote Control driver registered, major 251 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
i2c-core: driver [adv7180] using legacy suspend method
i2c-core: driver [adv7180] using legacy resume method
i2c-core: driver [adv7612] using legacy suspend method
i2c-core: driver [adv7612] using legacy resume method
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
vin vin.0: VIN Unit driver attached to camera 0
adv7612 2-004c: chip found @ 0x98 (i2c-rcar)
vin vin.0: VIN Unit driver detached from camera 0
soc-camera-pdrv soc-camera-pdrv.1: Probing soc-camera-pdrv.1
vin vin.1: VIN Unit driver attached to camera 0
adv7180 2-0020: chip found @ 0x40 (i2c-rcar)
vin vin.1: VIN Unit driver detached from camera 0
[drm] Initialized drm 1.1.0 20060810
Console: switching to colour frame buffer device 160x45
rcar-du rcar-du-r8a7790: fb0:  frame buffer device
rcar-du rcar-du-r8a7790: registered panic notifier
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized rcar-du 1.0.0 20130110 on minor 0
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
sh_mobile_sdhi sh_mobile_sdhi.0: mmc0 base at 0xee100000 clock rate 0 MHz
sh_mobile_sdhi sh_mobile_sdhi.1: mmc1 base at 0xee120000 clock rate 0 MHz
sh_mobile_sdhi sh_mobile_sdhi.2: mmc2 base at 0xee140000 clock rate 0 MHz
sh_mobile_sdhi sh_mobile_sdhi.3: mmc3 base at 0xee160000 clock rate 0 MHz
sh_mmcif sh_mmcif.0: driver version 2010-04-28
sh_mmcif sh_mmcif.1: driver version 2010-04-28
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
asoc: ak4642-hifi <-> scu-ssi-dai mapping ok
TCP: cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
platform pvrsrvkm: start latency exceeded, new value 3900 ns
platform pvrsrvkm: state save latency exceeded, new value 300 ns
ALSA device list:
  #0: lager-ak4643
usb 5-1: new low-speed USB device number 2 using ohci-platform
platform pvrsrvkm: stop latency exceeded, new value 2500 ns
Waiting 3sec before mounting root device...
input: SIGMACH1P U+P Mouse as /devices/platform/ohci-platform.1/usb5/5-1/5-1:1.0/0
generic-usb 0003:1C4F:0003.0001: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse]0
sh_mobile_sdhi sh_mobile_sdhi.0: DMA failed: -22, falling back to PIO
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA08G 7.42 GiB 
 mmcblk0: p1 p2
mmc5: new high speed MMC card at address 0001
mmcblk1: mmc5:0001 MMC08G 7.32 GiB 
mmcblk1boot0: mmc5:0001 MMC08G partition 1 2.00 MiB
mmcblk1boot1: mmc5:0001 MMC08G partition 2 2.00 MiB
 mmcblk1: p1
 mmcblk1boot1: unknown partition table
 mmcblk1boot0: unknown partition table

EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional featur)
EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional featur)
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 140K
tmpfs: Bad mount option smackfstransmute
systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +I)

Welcome to Tizen 3.0.0 (Tizen Next)!

systemd[1]: Failed to insert module 'ipv6'
systemd[1]: No hostname configured.
systemd[1]: Set hostname to <localhost>.
usb 5-1: USB disconnect, device number 2
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring:.
systemd[1]: Starting Collect Read-Ahead Data...
         Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
         Starting Replay Read-Ahead Data...
systemd[1]: Expecting device dev-ttySC6.device...
         Expectinsystemd-readahead[827]: Bumped block_nr parameter of 179:0 to 20.
g device dev-ttySC6.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
[  OK  ] Listening on Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automo.
systemd[1]: Starting Journal Socket.
[  OK  ] Listening on Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounted Debug File System.
systemd[1]: Starting Create list of required static device nodes for the current .
         Starting Create list of required static device nodes...rrent kernel...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
systemd[1]: Starting Initialize the VConf storage...
         Starting Initialize the VConf storage...
usb 5-1: new low-speed USB device number 3 using ohci-platform
systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  OK  ] Started Journal Service.
systemd[1]: Started Journal Service.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
input: SIGMACH1P U+P Mouse as /devices/platform/ohci-platform.1/usb5/5-1/5-1:1.0/1
generic-usb 0003:1C4F:0003.0002: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse]0
         Starting udev Coldplug all Devices...
[  OK  ] Reached target Swap.
systemd-journald[833]: Vacuuming done, freed 0 bytes
         Mounting Temporary Directory...
[  OK  ] Created slice Root Slice.
usb 5-1: USB disconnect, device number 3
[  OK  ] Created slice User and Session Slice.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-launchpad\x2dpreload.slice.
[  OK  ] Created slice system-user\x2dsession\x2dlaunch.slice.
[  OK  ] Created slice system-wrt_launchpad_daemon.slice.
[  OK  ] Reached target Slices.
[  OK  ] Started Collect Read-Ahead Data.
[  OK  ] Started Replay Read-Ahead Data.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Initialize the VConf storage.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Create list of required static device nodes ...current kernel.
[  OK  ] Started udev Coldplug all Devices.
         Starting Create static device nodes in /dev...
         Starting Setup Virtual Console...
usb 5-1: new low-speed USB device number 4 using ohci-platform
         Starting Apply Kernel Variables...
input: SIGMACH1P U+P Mouse as /devices/platform/ohci-platform.1/usb5/5-1/5-1:1.0/2
generic-usb 0003:1C4F:0003.0003: input: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse]0
         Mounting FUSE Control File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Create static device nodes in /dev.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Apply Kernel Variables.
         Starting udev Kernel Device Manager...
systemd-udevd[1433]: starting version 208
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttySC6.
vin vin.1: VIN Unit driver attached to camera 0
vin vin.0: VIN Unit driver attached to camera 0
adv7612 2-004c: Not detect any video input signal
vin vin.0: VIN Unit driver detached from camera 0
adv7180 2-0020: Not detect any video input signal
vin vin.1: VIN Unit driver detached from camera 0
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Recreate Volatile Files and Directories...
         Starting Trigger Flushing of Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Recreate Volatile Files and Directories.
         Starting Update UTMP about System Reboot/Shutdown...
systemd-journald[833]: Received request to flush runtime journal from PID 1
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Update UTMP about System Reboot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Reached target Paths.
[  OK  ] Listening on wrt_launchpad_daemon_2.socket.
[  OK  ] Listening on Wrt Security socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Listening on wrt_launchpad_daemon_1.socket.
[  OK  ] Listening on notifications.socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
[  OK  ] Reached target Basic System.
         Starting Murphy Resource Policy Daemon...
[  OK  ] Started Murphy Resource Policy Daemon.
         Starting Disk Manager...
         Starting Telephony daemon...
         Starting Start the security server...
[  OK  ] Started Start the security server.
         Starting NFC manager...
[  OK  ] Started NFC manager.
         Starting Start the Alarm service...
[  OK  ] Started Start the Alarm service.
         Starting Media server...
[  OK  ] Started Media server.
         Starting Kernel Modules for Renesas OpenMAX IL Inser...o the Kernel...
         Starting Download provider service...
MMNGR: CO from 0xb0000000 to 0xbfffffff
MMNGR: MXSAAR0(0x00b000c0)
fdpm (Mar 14 2014 20:47:52) driver for H2 installed
vspm (Mar 14 2014 20:48:55) driver installed
[  OK  ] Started Download provider service.
         Starting Authorization Manager...
         Starting PVR Initialization...
PVR_K: RGX use system memory.
pvrsrvkm pvrsrvkm: start latency exceeded, new value 5900 ns
pvrsrvkm pvrsrvkm: state restore latency exceeded, new value 500 ns
PVR_K: Compatibility checks: Ignoring fields: 'C' of HW BVNC.
         Starting Start the Access Control server...
[  OK  ] Started Start the Access Control server.
         Starting Start the preload/preinit daemon...
[  OK  ] Started Start the preload/preinit daemon.
         Starting Login Service...
         Starting Wrt security daemon...
         Starting Connection service...
         Starting Automotive Message Broker...
         Starting Telephony service...
         Starting Start the wrt_launchpad_daemon...
[  OK  ] Started Start the wrt_launchpad_daemon.
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting Permit User Sessions...
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Telephony daemon.
[  OK  ] Started Kernel Modules for Renesas OpenMAX IL Insert...nto the Kernel.
[  OK  ] Started PVR Initialization.
[  OK  ] Started Permit User Sessions.
         Starting Serial Getty on ttySC6...
[  OK  ] Started Serial Getty on ttySC6.
[  OK  ] Reached target Login Prompts.
         Starting Bluetooth service...
[  OK  ] Started Connection service.
[  OK  ] Started Automotive Message Broker.
[  OK  ] Started Telephony service.
[  OK  ] Started Login Service.
         Starting User Session Launcher...
[  OK  ] Started User Session Launcher.
[  OK  ] Started Bluetooth service.
[  OK  ] Created slice user-5000.slice.
         Starting User Manager for 5000...
[  OK  ] Started Authorization Manager.
[  OK  ] Started Disk Manager.
         Starting Bluetooth service...
net eth0: attached phy 1 to driver Generic PHY
         Starting WPA supplicant...
[  OK  ] Started Bluetooth service.
[  OK  ] Started WPA supplicant.

localhost login: PHY: r8a779x-ether-ff:01 - Link is Up - 100/Full

localhost login: rootlaunchpad_prelo (1676): /proc/1676/oom_adj is deprecated, pl.

Password: 
Welcome to Tizen
root:~> 
root:~> uname -a
Linux localhost 3.4.25-ltsi #38 SMP PREEMPT Fri Mar 14 21:50:51 JST 2014 armv7l Gx
root:~> 



More information about the lttng-dev mailing list