[lttng-dev] current_thread_info() not respecting program order with gcc 4.8.x

Luis Lozano llozano at chromium.org
Fri Nov 22 03:16:27 EST 2013


On Thu, Nov 21, 2013 at 7:38 PM, Mathieu Desnoyers <
mathieu.desnoyers at efficios.com> wrote:

> ----- Original Message -----
> > From: "Luis Lozano" <llozano at google.com>
> > To: "Mathieu Desnoyers" <mathieu.desnoyers at efficios.com>
> > Cc: "Jakub Jelinek" <jakub at redhat.com>, "Alexander Holler" <
> holler at ahsoftware.de>, "Linus Torvalds"
> > <torvalds at linux-foundation.org>, "Richard Henderson" <rth at twiddle.net>,
> "Linux Kernel Mailing List"
> > <linux-kernel at vger.kernel.org>, "Will Deacon" <will.deacon at arm.com>,
> "Catalin Marinas" <catalin.marinas at arm.com>,
> > "Peter Zijlstra" <peterz at infradead.org>, lttng-dev at lists.lttng.org,
> "Nathan Lynch" <Nathan_Lynch at mentor.com>, "Paul
> > E. McKenney" <paulmck at linux.vnet.ibm.com>, "Andrew Morton" <
> akpm at linux-foundation.org>, "Bhaskar Janakiraman"
> > <bjanakiraman at chromium.org>, "Han Shen" <shenhan at chromium.org>
> > Sent: Thursday, November 21, 2013 9:36:27 PM
> > Subject: Re: current_thread_info() not respecting program order with gcc
> 4.8.x
> >
> > Hi Mathieu,
> >
> > Yes the problem we were seeing with GCC bug 58854 is that an interrupt
> > handler was corrupting the stack of a routine which had an invalid
> > value of SP (not really on "top" of the stack) for part of the
> > routine.
> > But in the assembly code you sent, I don't see where sp is being
> > modified... or where the access to "below" sp is happening.
>
> The following instruction
>
>   f1c:      e50b1048        str     r1, [fp, #-72]  ; 0xffffffb8
>
> appears in the assembly generated by gcc 4.8.2, but not in the one
> generated by 4.7.3, which makes me wonder if it's good or not.



It is there in 4.7.3 just a few lines difference.
I don't see any meaningful difference between the 2 assembly snippets...
Just instructions ordered a little different?

Luis


> With
> slightly different build output from the diff (probably a different config
> from Nathan), the first function instructions look like:
>
> 00000efc <lttng_event_reserve>:
>      efc:       e1a0c00d        mov     ip, sp
>      f00:       e92ddff0        push    {r4, r5, r6, r7, r8, r9, sl, fp,
> ip, lr, pc}
>      f04:       e24cb004        sub     fp, ip, #4
>      f08:       e24dd03c        sub     sp, sp, #60     ; 0x3c
>      f0c:       e52de004        push    {lr}            ; (str lr, [sp,
> #-4]!)
>      f10:       ebfffffe        bl      0 <__gnu_mcount_nc>
>      f14:       e5903000        ldr     r3, [r0]
>      f18:       e1a04000        mov     r4, r0
>      f1c:       e1a0000d        mov     r0, sp
>      f20:       e5936030        ldr     r6, [r3, #48]   ; 0x30
>      f24:       e3c03d7f        bic     r3, r0, #8128   ; 0x1fc0
>      f28:       e3c3303f        bic     r3, r3, #63     ; 0x3f
>      f2c:       e50b104c        str     r1, [fp, #-76]  ; 0xffffffb4
>      f30:       e5932004        ldr     r2, [r3, #4]
>      f34:       e2822001        add     r2, r2, #1
>      f38:       e5832004        str     r2, [r3, #4]
>      f3c:       ebfffffe        bl      0 <debug_smp_processor_id>
>      f40:       e59f2e44        ldr     r2, [pc, #3652] ; 1d8c
> <lttng_event_reserve+0xe90>
>      f44:       e59f3e44        ldr     r3, [pc, #3652] ; 1d90
> <lttng_event_reserve+0xe94>
>      f48:       e7921100        ldr     r1, [r2, r0, lsl #2]
>      f4c:       e1a05000        mov     r5, r0
>      f50:       e7932001        ldr     r2, [r3, r1]
>
> My rusty ARM assembler knowledge analyzes this like:
>
> ip = sp            (ip being the scratch register)
> push 11 registers * 4 bytes = 44 bytes onto the stack
> fp = ip - 4
> sp = sp - 60   (sp = ip - 104)
> push {lr} bl
> 0 <__gnu_mcount_nc>  (dynamically patched to a pop {lr})
> [...]
> store r1 into mem location fp - 76
>
> So yes, it does look like the -76 from fp is within the stack.
>
>
> > In GCC bug 58854 it was pretty clear that the restore of the sp
> > register in the epilogue is moved to somewhere close to the prologue
> > of the routine.
> > Are we missing some diffs from the assembly comparison?
>
> My next step is to setup my own 4.8.2 ARM cross-compiler. I've tried this
> morning,
> did not manage to get one working even after following 2 howtos, trying
> with Debian
> packages, etc. Nathan told me this diff was the full comparison between
> the two
> functions, but you'll understand that at this point I want to reproduce
> everything myself, because this is a _weird_ issue.
>
> But after a long day of debugging, it's time for some sleep. I will get
> back to this
> tomorrow,
>
> Thanks,
>
> Mathieu
>
> >
> > Thanks
> >
> > Luis
> >
> >
> >
> >
> > On Thu, Nov 21, 2013 at 5:57 PM, Mathieu Desnoyers
> > <mathieu.desnoyers at efficios.com> wrote:
> > > ----- Original Message -----
> > >> From: "Jakub Jelinek" <jakub at redhat.com>
> > >> To: "Luis Lozano" <llozano at google.com>
> > >> Cc: "Alexander Holler" <holler at ahsoftware.de>, "Linus Torvalds"
> > >> <torvalds at linux-foundation.org>, "Mathieu Desnoyers"
> > >> <mathieu.desnoyers at efficios.com>, "Richard Henderson" <
> rth at twiddle.net>,
> > >> "Linux Kernel Mailing List"
> > >> <linux-kernel at vger.kernel.org>, "Will Deacon" <will.deacon at arm.com>,
> > >> "Catalin Marinas" <catalin.marinas at arm.com>,
> > >> "Peter Zijlstra" <peterz at infradead.org>, lttng-dev at lists.lttng.org,
> > >> "Nathan Lynch" <Nathan_Lynch at mentor.com>, "Paul
> > >> E. McKenney" <paulmck at linux.vnet.ibm.com>, "Andrew Morton"
> > >> <akpm at linux-foundation.org>, "Bhaskar Janakiraman"
> > >> <bjanakiraman at chromium.org>, "Han Shen" <shenhan at chromium.org>
> > >> Sent: Thursday, November 21, 2013 7:39:04 PM
> > >> Subject: Re: current_thread_info() not respecting program order with
> gcc
> > >> 4.8.x
> > >>
> > >> On Thu, Nov 21, 2013 at 03:45:35PM -0800, Luis Lozano wrote:
> > >> > I think we need a reproducer. Without this we may all be going on
> the
> > >> > wrong path. This whole conversation started on an *assumption* that
> > >> > some accesses were being reordered.
> > >> >
> > >> > evidence of the reorder or reproducer please?
> > >>
> > >> Yeah, if a compiler bug is suspected, can anybody please open
> > >> a bugreport in http://gcc.gnu.org/bugzilla/ with the preprocessed
> source,
> > >> compiler version, flags and how it was configured and some hint in
> which
> > >> function to look for what exactly?  We don't necessarily need a
> runtime
> > >> small reproducer, but if it can be shown in the assembly what has been
> > >> reordered and why you think it shouldn't, with the above mentioned
> input
> > >> that ought to be sufficient.  Thanks.
> > >
> > > OK OK, let me reply on list first so I can share the result of a full
> day
> > > of bug hunting. We're not there yet, but many options have been
> eliminated.
> > >
> > > The issue shows up in stress test, when tracing with lttng-modules
> 2.4-rc1,
> > > on ARM. It's been reproduced with a Linux kernel 3.12 so far, with
> > > lttng-modules
> > > compiled against that kernel.
> > >
> > > First, I asked Nathan to compile his kernel with gcc 4.7, and
> lttng-modules
> > > with gcc 4.8.x (and vice-versa). The problem only appears when
> > > lttng-modules
> > > are compiled with gcc 4.8.x. The compiler version used to compile the
> rest
> > > of the kernel does not matter.
> > >
> > > Then I looked at gcc 4.8 changelog for ARM, new feature:
> > > -fno-sched-pressure
> > > (sched pressure is there by default). Nathan tried compiling
> lttng-modules
> > > with
> > > -fno-sched-pressure. The problem still reproduces.
> > >
> > > Knowing that adding barrier() outside of preempt_disable()/enable() was
> > > fixing the issue, we tried identifying which code location was
> responsible
> > > for working around the issue. Skipping a long investigation, here is
> the
> > > executive summary:
> > >
> > >
> http://git.lttng.org/?p=lttng-modules.git;a=blob;f=lttng-ring-buffer-client.h;h=50c47b3bf49f6c2dd24e250cf1a9b97808cd8e27;hb=HEAD
> > >
> > > Has the following function. We identified that adding a barrier() as
> shown
> > > below
> > > works around the issue:
> > >
> > > static
> > > int lttng_event_reserve(struct lib_ring_buffer_ctx *ctx,
> > >                       uint32_t event_id)
> > > {
> > >         struct lttng_channel *lttng_chan =
> channel_get_private(ctx->chan);
> > >         int ret, cpu;
> > >
> > >         cpu = lib_ring_buffer_get_cpu(&client_config);
> > >         if (cpu < 0)
> > >                 return -EPERM;
> > >         ctx->cpu = cpu;
> > >
> > >         switch (lttng_chan->header_type) {
> > >         case 1: /* compact */
> > >                 if (event_id > 30)
> > >                         ctx->rflags |= LTTNG_RFLAG_EXTENDED;
> > >                 break;
> > >         case 2: /* large */
> > >                 if (event_id > 65534)
> > >                         ctx->rflags |= LTTNG_RFLAG_EXTENDED;
> > >                 break;
> > >         default:
> > >                 WARN_ON_ONCE(1);
> > >         }
> > >
> > >         ret = lib_ring_buffer_reserve(&client_config, ctx);
> > >         if (ret)
> > >                 goto put;
> > >         lttng_write_event_header(&client_config, ctx, event_id);
> > >         return 0;
> > > put:
> > >         lib_ring_buffer_put_cpu(&client_config);
> > >         ---------------> barrier() added here;
> > >         <----------------------------
> > >         return ret;
> > > }
> > >
> > > Where barrier() is the usual asm volatile with "memory" clobber,
> nothing
> > > else.
> > >
> > > Nathan gave me the binary diff for the assembly generated for this
> function
> > > without
> > > the barrier and with the barrier:
> > >
> > > --- /tmp/lttng_event_reserve-4.8.2.dump 2013-11-21 11:14:14.536495079
> -0600
> > > +++ /tmp/lttng_event_reserve-with-barrier-4.8.2.dump    2013-11-21
> > > 14:12:52.997355907 -0600
> > > @@ -7,11 +7,11 @@
> > >       f10:      ebfffffe        bl      0 <__gnu_mcount_nc>
> > >       f14:      e5903000        ldr     r3, [r0]
> > >       f18:      e1a04000        mov     r4, r0
> > > -     f1c:      e50b1048        str     r1, [fp, #-72]  ; 0xffffffb8
> > > +     f1c:      e1a0000d        mov     r0, sp
> > >       f20:      e5936030        ldr     r6, [r3, #48]   ; 0x30
> > > -     f24:      e1a0000d        mov     r0, sp
> > > -     f28:      e3c03d7f        bic     r3, r0, #8128   ; 0x1fc0
> > > -     f2c:      e3c3303f        bic     r3, r3, #63     ; 0x3f
> > > +     f24:      e3c03d7f        bic     r3, r0, #8128   ; 0x1fc0
> > > +     f28:      e3c3303f        bic     r3, r3, #63     ; 0x3f
> > > +     f2c:      e50b1048        str     r1, [fp, #-72]  ; 0xffffffb8
> > >       f30:      e5932004        ldr     r2, [r3, #4]
> > >       f34:      e2822001        add     r2, r2, #1
> > >       f38:      e5832004        str     r2, [r3, #4]
> > > @@ -53,7 +53,7 @@
> > >       fc8:      e3c3303f        bic     r3, r3, #63     ; 0x3f
> > >       fcc:      e5933000        ldr     r3, [r3]
> > >       fd0:      e3130002        tst     r3, #2
> > > -     fd4:      0a000000        beq     fdc <lttng_event_reserve+0xe0>
> > > +     fd4:      0a0002be        beq     1ad4
> <lttng_event_reserve+0xbd8>
> > >       fd8:      ebfffffe        bl      0 <preempt_schedule>
> > >       fdc:      ea0002bc        b       1ad4
> <lttng_event_reserve+0xbd8>
> > >       fe0:      e3500000        cmp     r0, #0
> > >
> > > We tried disabling the ftrace function tracing to get mcount out of the
> > > way,
> > > and the problem still reproduces.
> > >
> > > I'm stopping here in terms of details about the disassembly, because I
> > > need to double check with Nathan that I get the right disassembly for
> the
> > > right
> > > cases. I also terribly need to setup a 4.8.2 ARM cross-compiler on my
> > > machine.
> > >
> > > I'm attaching Nathan's ARM configuration.
> > >
> > > It does look behave a bit like this bug pointed out by Luis:
> > >
> > > http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
> > >
> > > AFAIU (please correct me if I am wrong), ARM's interrupt handler run
> > > on top of the thread stack (?). If it's the case, then anything stored
> > > on the stack below "sp" could be overwritten by an interrupt handler.
> > > This would fit well the reproduction scenario for this bug: Nathan runs
> > > LTTng tracing of kmem_cache_free tracepoint with hackbench running.
> > > A race between a short window of stack use below sp and interrupt
> handlers
> > > would trigger with this kind of stress-test.
> > >
> > > Thoughts ?
> > >
> > > Thanks,
> > >
> > > Mathieu
> > >
> > >
> > > --
> > > Mathieu Desnoyers
> > > EfficiOS Inc.
> > > http://www.efficios.com
> >
> >
> >
> > --
> >
> > Luis A. Lozano | Software Engineer | llozano at google.com | +1
> (408)431-5164
> >
>
> --
> Mathieu Desnoyers
> EfficiOS Inc.
> http://www.efficios.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lttng.org/pipermail/lttng-dev/attachments/20131122/bfaf4034/attachment-0001.html>


More information about the lttng-dev mailing list