[ltt-dev] no metadata tracefile

[Ji Zhai]

Hi Mathieu,

Thanks for your reply!
I have tried many combinations, for example, userspace-rcu-0.6.4 and
ust-0.15, but still got the same kind of errors--no metadata trace
tracefile.
Any idea? Thanks again!

Regards,

Ji

-----Original Message-----
From: pdumas9 at sympatico.ca [mailto:pdumas9 at sympatico.ca] On Behalf Of
Mathieu Desnoyers
Sent: Tuesday, September 13, 2011 2:57 PM
To: Ji Zhai
Cc: ltt-dev at lists.casi.polymtl.ca
Subject: Re: [ltt-dev] no metadata tracefile

* Ji Zhai (Ji.Zhai at ca.flextronics.com) wrote:
> Hi All,
> 
>  
> 
> Could you please give me any suggestions or hints?
> 
> Thanks in advance!
> 
>  
> 
> Ji
> 
>  
> 
> ________________________________
> 
> From: Ji Zhai [mailto:Ji.Zhai at ca.flextronics.com] 
> Sent: Wednesday, August 31, 2011 4:47 PM
> To: ltt-dev at lists.casi.polymtl.ca
> Subject: [ltt-dev] no metadata tracefile
> 
>  
> 
> Hi All,
> 
>  
> 
> As the restriction of the hardware and development environment, I am
> trying to use UST as the following combination:
> 
> 1. PowerPC 44x platform
> 
> 2. Linux kernel 2.6.31.12
> 
> 3. LTTng v0.170
> 
> 4. userspace RCU 0.4.6
> 
> 5. UST 0.6

Hi,

UST 0.6 is not supported anymore. Please upgrade.

Best regards,

Mathieu


> 
> 6. LTTV 0.12.20
> 
>  
> 
> I can get the kernel traces and use LTTV 0.12.20 to review them.
> 
> However, when I use the sample code from the "Section 3 Quick Start"
of
> UST manual,
> 
>  
> #include <ust/marker.h>
>      
>      int main(int argc <http://en.wikipedia.org/wiki/Main_function> ,
> char **argv)
>      {
>         int v;
>         char *st;
>      
>         /* ... set values of v and st ... */
>      
>         /* a marker: */
>         trace_mark(ust, myevent, "firstarg %d secondarg %s", v, st);
>      
>         /* a marker without arguments: */
>         trace_mark(ust, myotherevent, MARK_NOARGS);
>      
>         return 0;
>      }
> 
>  
> 
> I got the errors by using LTTV 0.12.20:
> 
>  
> 
> ** (process:18957): WARNING **: Unsupported trace version : 2.6
> 
>  
> 
> ** (process:18957): WARNING **: parse_trace_header error
> 
>  
> 
> ** (process:18957): WARNING **: Unsupported trace version : 2.6
> 
>  
> 
> ** (process:18957): WARNING **: parse_trace_header error
> 
>  
> 
> ** (process:18957): WARNING **: Trace
> /nas/LTTng/mytrace/24407_5647013710766707006 has no metadata tracefile
> 
>  
> 
> ** (process:18957): CRITICAL **: cannot open trace .
> 
> /usr/local/bin/lttv: line 15: 18957 Segmentation fault      $0.real $*
> 
>  
> 
> From the mailing list, some guys said to use LTTV 0.12.30 or higher
may
> solve this problem.
> 
>  
> 
> After run LTTV 0.12.32, I got:
> 
>  
> 
> ** ERROR **: Undescribed event 0 in channel ust
> 
> aborting...
> 
> /home/LTTng/bin/lttv: line 15: 19600 Aborted                 $0.real
$*
> 
>  
> 
> So, I doubt that I may miss some key steps to configure the kernel for
> powerpc. The "UST" does not create the trace for me.
> 
> I'd like to get your suggestions. Thanks in advance!
> 
>  
> 
> Regards,
> 
>  
> 
> Ji
> 
> Legal Disclaimer: The information contained in this message may be
> privileged and confidential. It is intended to be read only by the
> individual or entity to whom it is addressed or by their designee. If
> the reader of this message is not the intended recipient, you are on
> notice that any distribution of this message, in any form, is strictly
> prohibited. If you have received this message in error, please
> immediately notify the sender and delete or destroy any copy of this
> message 
> 

> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev


-- 
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com