[ltt-dev] Trying to compile lttng

[Irina Guilman]

I did make install, and the install directory is on the LDFLAGS (for linking) and on the LD_LIBRARY_PATH . The library itself it finds. 

-----Original Message-----
From: David Goulet [mailto:david.goulet at polymtl.ca] 
Sent: May 5, 2011 1:36 PM
To: Irina Guilman
Cc: ltt-dev at lists.casi.polymtl.ca
Subject: Re: [ltt-dev] Trying to compile lttng

Hmmmm,

Using the git HEAD ust with the latest urcu git HEAD, the configure does not fail on my side.

Basic questions, once you've installed liburcu (make && sudo make install), have you done "ldconfig" ?

David

On 11-05-05 01:29 PM, Irina Guilman wrote:
> I am trying to compile the ust itself, and the ./configure step 
> fails... (liburcu compiled, I have the latest version, with the 
> cds_list_add() in the list.h,  and it finds the library)
>
> This is what I get:
>
> checking whether cds_list_add(0, 0) is declared... no
> configure: error: liburcu 0.5 or newer is needed, please update your version or use LDFLAGS=-Ldir to specify the right location.
>
>
> Any suggestions?
>
> Thanks.
>
> // Commenting out the step seems to be ok, it seems to compile after, but the right way is to set the environment correctly.
>
>
>
>
> -----Original Message-----
> From: David Goulet [mailto:david.goulet at polymtl.ca]
> Sent: May 5, 2011 1:18 PM
> To: Daniel U. Thibault
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: Re: [ltt-dev] Trying to compile lttng-tools
>
> Hi Daniel,
>
> Yep, we are aware of that problem and will be fix in the next release.
>
> Note that UST is not yet ready for the lttng-tools integration... This will come in a very short term probably at release version 0.14. You can still use basic trace command of lttng-tools to control UST.
>
> But, for now, you can fix that quickly by changing this to "libustctl/Makefile.am" from the git source of ust.
>
> -       $(top_builddir)/libustcomm/libustcomm.la
> +       $(top_builddir)/libustcomm/libustcomm.la \
> +       $(top_builddir)/snprintf/libustsnprintf.la
>
> Recompile and install ust and should be fine :)
>
> Don't hesitate for any other problems/comments.
>
> Cheers
> David
>
> On 11-05-05 12:32 PM, Daniel U. Thibault wrote:
>> I'm trying to compile the latest lttng-tools (lttng-tools-9624336,
>> 2011-05-04) and keep running into a weird error.
>>
>> So far, ltt-control (cdfcd01, 2011-04-13), userspace-rcu 0.5.4 and 
>> ust
>> 0.12 are downloaded from git.lttng.org, compiled and installed.  I 
>> download
>> lttng-tools-9624336 from the same source, run ./bootstrap without any 
>> unusual results, but ./configure fails with:
>>
>> checking for ustctl_connect_pid in -lustctl... no
>> configure: error: Cannot find libustctl. Use LDFLAGS=-Ldir to specify 
>> its location.
>>
>> The config.log hints at the problem's source:
>>
>> configure:4421: checking for ustctl_connect_pid in -lustctl
>> configure:4446: gcc -o conftest -g -O2   conftest.c -lustctl  -luuid -lpopt
>> -lpthread>&5
>> //usr/local/lib/libustctl.so: undefined reference to `ust_safe_snprintf'
>> collect2: ld returned 1 exit status
>>
>> libustctl (.so.0.0.0, .so.0, .so, .a, .la) is in /usr/local/lib/ and 
>> contains 'ust_safe_snprintf' in its hex code.  Recall that UST 0.12 
>> compiled without a hitch ('ust_safe_snprintf' appears in usterr.h, 
>> ust_snprintf.h, snprintf.c, and tests/snprintf/prog.c, as fas as 
>> source goes).  Well, not completely true: for some weird reason, 
>> /usr/local/lib/libust.so ended up containing these four
>> lines:
>>
>> /* GNU ld script
>>      Use the shared library, but the link with initializer too */
>> OUTPUT_FORMAT(elf64-x86-64)
>> GROUP ( libust.so.0 libust-initializer.o )
>>
>> I replaced it with the expected symbolic link to 
>> /usr/local/lib/libust.so.0.0.0 (the lttng-tools problem is the same 
>> before and after this fix)
>>
>> If it matters, I'm running a virtual Ubuntu 10.10 64-bits machine.
>>
>> I'm at a loss as to how to fix this, and there's nothing on the Web 
>> about this configure error (except a short thread on this very mailing list).
>>
>>
>> _______________________________________________
>> ltt-dev mailing list
>> ltt-dev at lists.casi.polymtl.ca
>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>
> --
> David Goulet
> LTTng project, DORSAL Lab.
>
> PGP/GPG : 1024D/16BD8563
> BE3C 672B 9331 9796 291A  14C6 4AF7 C14B 16BD 8563
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>

--
David Goulet
LTTng project, DORSAL Lab.

PGP/GPG : 1024D/16BD8563
BE3C 672B 9331 9796 291A  14C6 4AF7 C14B 16BD 8563