[lttng-dev] [PATCH lttng-tools 14/14] Cleaned up configure.ac: Replaced space indents by tabs, regrouped AC_ARG_WITH's, generalized the coding style, fixed a bad AS_HELP_STRING.
Mathieu Desnoyers
mathieu.desnoyers at efficios.com
Mon May 6 15:28:38 EDT 2013
* David Goulet (dgoulet at efficios.com) wrote:
> Why?
cleaning up the configure.ac is a good thing. However, this patch should
probably be split into 3 patches.
1) Cleanup: configure.ac: replace space indents by tabs
2) Cleanup: configure.ac: regroup AC_ARG_WITH
3) Error message fix: configure.ac: fix bad AS_HELP_STRING
Not sure about "generalized coding style" though. It might require more
explanation.
Thanks,
Mathieu
>
> Thanks!
> David
>
> Charles Briere:
> > From: Pierre-Luc St-Charles <pierre-luc.st-charles at polymtl.ca>
> >
> > Signed-off-by: Pierre-Luc St-Charles <pierre-luc.st-charles at polymtl.ca>
> > ---
> > configure.ac | 315 ++++++++++++++++++++++++++++++++---------------------------
> > 1 file changed, 171 insertions(+), 144 deletions(-)
> >
> > diff --git a/configure.ac b/configure.ac
> > index 154b0a7..e4d2c6f 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -17,27 +17,32 @@ AC_CONFIG_HEADERS([include/config.h])
> > AC_PROG_GREP
> > # libtool link_all_deplibs fixup. See http://bugs.lttng.org/issues/321.
> > AC_ARG_ENABLE(libtool-linkdep-fixup,
> > - AS_HELP_STRING([--disable-libtool-linkdep-fixup],
> > - [disable the libtool fixup for linking all dependent libraries (link_all_deplibs)]),
> > - libtool_fixup=$enableval,
> > - libtool_fixup=yes)
> > +[
> > + AS_HELP_STRING([--disable-libtool-linkdep-fixup],[disable the libtool fixup for linking all dependent libraries (link_all_deplibs)])
> > +],
> > +[
> > + libtool_fixup=$enableval
> > +],
> > +[
> > + libtool_fixup=yes
> > +])
> >
> > AS_IF([test "x$libtool_fixup" = "xyes"],
> > - [
> > - libtool_m4="$srcdir/config/libtool.m4"
> > - libtool_flag_pattern=".*link_all_deplibs\s*,\s*\$1\s*)"
> > - AC_MSG_CHECKING([for occurence(s) of link_all_deplibs = no in $libtool_m4])
> > - libtool_flag_pattern_count=$(grep -c "$libtool_flag_pattern\s*=\s*no" $libtool_m4)
> > - AS_IF([test $libtool_flag_pattern_count -ne 0],
> > - [
> > - AC_MSG_RESULT([$libtool_flag_pattern_count])
> > - AC_MSG_WARN([the detected libtool will not link all dependencies, forcing link_all_deplibs = unknown])
> > - sed -i "s/\($libtool_flag_pattern\)\s*=\s*no/\1=unknown/g" $libtool_m4
> > - ],
> > - [
> > - AC_MSG_RESULT([none])
> > - ])
> > - ])
> > +[
> > + libtool_m4="$srcdir/config/libtool.m4"
> > + libtool_flag_pattern=".*link_all_deplibs\s*,\s*\$1\s*)"
> > + AC_MSG_CHECKING([for occurence(s) of link_all_deplibs = no in $libtool_m4])
> > + libtool_flag_pattern_count=$(grep -c "$libtool_flag_pattern\s*=\s*no" $libtool_m4)
> > + AS_IF([test $libtool_flag_pattern_count -ne 0],
> > + [
> > + AC_MSG_RESULT([$libtool_flag_pattern_count])
> > + AC_MSG_WARN([the detected libtool will not link all dependencies, forcing link_all_deplibs = unknown])
> > + sed -i "s/\($libtool_flag_pattern\)\s*=\s*no/\1=unknown/g" $libtool_m4
> > + ],
> > + [
> > + AC_MSG_RESULT([none])
> > + ])
> > +])
> >
> > AM_CONDITIONAL([NO_SHARED], [test x$enable_shared = xno])
> >
> > @@ -57,55 +62,55 @@ AC_CHECK_HEADERS([ \
> >
> > # Babeltrace viewer check
> > AC_ARG_WITH([babeltrace-bin],
> > - AS_HELP_STRING([--with-babeltrace-bin],
> > - [Location of the babeltrace viewer executable (including the filename)]),
> > + AS_HELP_STRING([--with-babeltrace-bin], [Location of the babeltrace viewer executable (including the filename)]),
> > [BABELTRACE_BIN="$withval"],
> > [BABELTRACE_BIN=''])
> > AC_SUBST([BABELTRACE_BIN])
> >
> > # lttv-gui
> > AC_ARG_WITH([lttv-gui-bin],
> > - AS_HELP_STRING([--with-lttv-gui-bin],
> > - [Location of the lttv GUI viewer executable (including the filename)]),
> > - [LTTV_GUI_BIN="$withval"],
> > - [LTTV_GUI_BIN=''])
> > + AS_HELP_STRING([--with-lttv-gui-bin], [Location of the lttv GUI viewer executable (including the filename)]),
> > + [LTTV_GUI_BIN="$withval"],
> > + [LTTV_GUI_BIN=''])
> > AC_SUBST([LTTV_GUI_BIN])
> >
> > AC_ARG_WITH([consumerd32-bin],
> > - AS_HELP_STRING([--with-consumerd32-bin],
> > - [Location of the 32-bit consumerd executable (including the filename)]),
> > + AS_HELP_STRING([--with-consumerd32-bin], [Location of the 32-bit consumerd executable (including the filename)]),
> > [CONSUMERD32_BIN="$withval"],
> > [CONSUMERD32_BIN=''])
> > AC_SUBST([CONSUMERD32_BIN])
> >
> > AC_ARG_WITH([consumerd64-bin],
> > - AS_HELP_STRING([--with-consumerd64-bin],
> > - [Location of the 64-bit consumerd executable (including the filename)]),
> > + AS_HELP_STRING([--with-consumerd64-bin], [Location of the 64-bit consumerd executable (including the filename)]),
> > [CONSUMERD64_BIN="$withval"],
> > [CONSUMERD64_BIN=''])
> > AC_SUBST([CONSUMERD64_BIN])
> >
> > AC_ARG_WITH([consumerd32-libdir],
> > - AS_HELP_STRING([--with-consumerd32-libdir],
> > - [Directory containing the 32-bit consumerd libraries]),
> > + AS_HELP_STRING([--with-consumerd32-libdir], [Directory containing the 32-bit consumerd libraries]),
> > [CONSUMERD32_LIBDIR="$withval"],
> > [CONSUMERD32_LIBDIR=''])
> > AC_SUBST([CONSUMERD32_LIBDIR])
> >
> > AC_ARG_WITH([consumerd64-libdir],
> > - AS_HELP_STRING([--with-consumerd64-libdir],
> > - [Directory containing the 64-bit consumerd libraries]),
> > + AS_HELP_STRING([--with-consumerd64-libdir], [Directory containing the 64-bit consumerd libraries]),
> > [CONSUMERD64_LIBDIR="$withval"],
> > [CONSUMERD64_LIBDIR=''])
> > AC_SUBST([CONSUMERD64_LIBDIR])
> >
> > AC_ARG_WITH([sessiond-bin],
> > - AS_HELP_STRING([--with-sessiond-bin],
> > - [Location of the sessiond executable (including the filename)]),
> > + AS_HELP_STRING([--with-sessiond-bin], [Location of the sessiond executable (including the filename)]),
> > [SESSIOND_BIN="$withval"],
> > [SESSIOND_BIN=''])
> > AC_SUBST([SESSIOND_BIN])
> >
> > +# Option to only build the consumer daemon and its libraries
> > +AC_ARG_WITH([consumerd-only],
> > + AS_HELP_STRING([--with-consumerd-only], [Only build the consumer daemon [default=no]]),
> > + [consumerd_only=$withval],
> > + [consumerd_only=no])
> > +AM_CONDITIONAL([BUILD_CONSUMERD_ONLY], [test "x$consumerd_only" = "xyes"])
> > +
> > AC_DEFINE_UNQUOTED([CONFIG_CONSUMERD32_BIN], "$CONSUMERD32_BIN", [Location of the 32-bit consumerd executable.])
> > AC_DEFINE_UNQUOTED([CONFIG_CONSUMERD64_BIN], "$CONSUMERD64_BIN", [Location of the 64-bit consumerd executable])
> > AC_DEFINE_UNQUOTED([CONFIG_CONSUMERD32_LIBDIR], "$CONSUMERD32_LIBDIR", [Search for consumerd 32-bit libraries in this location.])
> > @@ -117,23 +122,24 @@ AC_DEFINE_UNQUOTED([CONFIG_SESSIOND_BIN], "$SESSIOND_BIN", [Location of the sess
> > # Check for pthread
> > AC_CHECK_LIB([pthread], [pthread_create], [],
> > [
> > - # Check for pthread in a bionic libc...
> > + # Check for pthread in a bionic libc...
> > AC_CHECK_LIB([c], [pthread_create], [],
> > [
> > - AC_MSG_ERROR([Cannot find libpthread. Use [LDFLAGS]=-Ldir to specify its location.])
> > + AC_MSG_ERROR([Cannot find libpthread. Use [LDFLAGS]=-Ldir to specify its location.])
> > ])
> > -]
> > -)
> > +])
> >
> > # Check low-level endian compat functions
> > AC_CHECK_DECL(be64toh, [],
> > [
> > - AC_CHECK_DECL(betoh64, [AC_DEFINE_UNQUOTED([LTTNG_HAVE_BETOH64], 1, [Has BSD-style endian conversion operations.])],
> > + AC_CHECK_DECL(betoh64,
> > + [
> > + AC_DEFINE_UNQUOTED([LTTNG_HAVE_BETOH64], 1, [Has BSD-style endian conversion operations.])
> > + ],
> > [
> > AC_MSG_ERROR([Cannot find be64toh, betoh64 or any similar functions.])
> > ])
> > -]
> > -)
> > +])
> >
> > # Check if gettid() is already defined
> > AC_CHECK_DECL(gettid,
> > @@ -146,11 +152,10 @@ AC_CHECK_LIB([popt], [poptGetContext], [],
> > [
> > # Check for libpopt in oprofile for Android
> > AC_CHECK_LIB([oprofile_popt], [poptGetContext], [],
> > - [
> > - AC_MSG_ERROR([Cannot find libpopt. Use [LDFLAGS]=-Ldir to specify its location.])
> > - ])
> > -]
> > -)
> > + [
> > + AC_MSG_ERROR([Cannot find libpopt. Use [LDFLAGS]=-Ldir to specify its location.])
> > + ])
> > +])
> >
> > # Check for libuuid
> > AC_CHECK_LIB([uuid], [uuid_generate],
> > @@ -176,8 +181,7 @@ AC_CHECK_LIB([uuid], [uuid_generate],
> > AC_MSG_ERROR([Cannot find libuuid uuid_generate, libc uuid_create nor libext2_uuid uuid_generate. Use [LDFLAGS]=-Ldir to specify their location.])
> > ])
> > ])
> > -]
> > -)
> > +])
> > AM_CONDITIONAL([LTTNG_BUILD_WITH_LIBUUID], [test "x$have_libuuid" = "xyes"])
> > AM_CONDITIONAL([LTTNG_BUILD_WITH_LIBC_UUID], [test "x$have_libc_uuid" = "xyes"])
> > AM_CONDITIONAL([LTTNG_BUILD_WITH_LIBEXT2_UUID], [test "x$have_libext2_uuid" = "xyes"])
> > @@ -222,41 +226,59 @@ liburcu_version=">= 0.7.2"
> >
> > # Check liburcu needed function calls
> > AC_CHECK_DECL([cds_list_add], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/list.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/list.h>]
> > +])
> > AC_CHECK_DECL([cds_wfq_init], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/wfqueue.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/wfqueue.h>]
> > +])
> > AC_CHECK_DECL([cds_wfq_dequeue_blocking], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/wfqueue.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/wfqueue.h>]
> > +])
> > AC_CHECK_DECL([futex_async], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/futex.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu/futex.h>]
> > +])
> > AC_CHECK_DECL([rcu_thread_offline], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]
> > +])
> > AC_CHECK_DECL([rcu_thread_online], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]
> > +])
> > AC_CHECK_DECL([caa_likely], [],
> > - [AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]]
> > -)
> > +[
> > + AC_MSG_ERROR([liburcu $liburcu_version or newer is needed])], [[#include <urcu.h>]
> > +])
> >
> > # Check liblttng-ust-ctl library
> > AC_ARG_ENABLE(lttng-ust,
> > - AS_HELP_STRING([--disable-lttng-ust],[build without LTTng-UST (Userspace Tracing) support]),
> > - lttng_ust_support=$enableval, lttng_ust_support=yes)
> > +[
> > + AS_HELP_STRING([--disable-lttng-ust],[build without LTTng-UST (Userspace Tracing) support])
> > +],
> > +[
> > + lttng_ust_support=$enableval
> > +],
> > +[
> > + lttng_ust_support=yes
> > +])
> >
> > -AS_IF([test "x$lttng_ust_support" = "xyes"], [
> > +AS_IF([test "x$lttng_ust_support" = "xyes"],
> > +[
> > AC_CHECK_LIB([lttng-ust-ctl], [ustctl_set_filter],
> > - [
> > - AC_DEFINE([HAVE_LIBLTTNG_UST_CTL], [1], [has LTTng-UST control support])
> > - lttng_ust_ctl_found=yes
> > - ],
> > - [AC_MSG_ERROR([Cannot find LTTng-UST 2.1.x. Use [LDFLAGS]=-Ldir to specify its location, or specify --disable-lttng-ust to build lttng-tools without LTTng-UST support.])],
> > - [-lurcu-common -lurcu-bp -lurcu-cds -lc -lrt]
> > - )
> > + [
> > + AC_DEFINE([HAVE_LIBLTTNG_UST_CTL], [1], [has LTTng-UST control support])
> > + lttng_ust_ctl_found=yes
> > + ],
> > + [
> > + AC_MSG_ERROR([Cannot find LTTng-UST 2.1.x. Use [LDFLAGS]=-Ldir to specify its location, or specify --disable-lttng-ust to build lttng-tools without LTTng-UST support.])
> > + ],
> > + [
> > + -lurcu-common -lurcu-bp -lurcu-cds -lc -lrt
> > + ])
> > ])
> > AM_CONDITIONAL([HAVE_LIBLTTNG_UST_CTL], [test "x$lttng_ust_ctl_found" = xyes])
> > AC_CHECK_FUNCS([sched_getcpu sysconf sync_file_range])
> > @@ -283,18 +305,15 @@ AM_CONDITIONAL([LTTNG_TOOLS_BUILD_WITH_LIBC_DL], [test "x$have_libc_dl" = "xyes"
> > AC_CHECK_LIB([c], [fmemopen],
> > [
> > AC_DEFINE_UNQUOTED([LTTNG_HAVE_FMEMOPEN], 1, [Has fmemopen support.])
> > -]
> > -)
> > +])
> >
> > # Check for open_memstream
> > AC_CHECK_LIB([c], [open_memstream],
> > [
> > AC_DEFINE_UNQUOTED([LTTNG_HAVE_OPEN_MEMSTREAM], 1, [Has open_memstream support.])
> > -]
> > -)
> > +])
> >
> > AC_ARG_VAR([LTTNG_RUNDIR], [Path to run directory, default to /var/run])
> > -
> > AS_IF([test -n "$LTTNG_RUNDIR"],
> > [
> > lttng_rundir=$LTTNG_RUNDIR
> > @@ -315,54 +334,49 @@ AC_DEFINE_UNQUOTED([DEFAULT_LTTNG_RUNDIR], ["$lttng_rundir"], [Location of the r
> > swig_version=2.0.0
> >
> > AC_ARG_ENABLE([python-bindings],
> > - [AC_HELP_STRING([--enable-python-bindings],
> > - [compile Python bindings])],
> > - [enable_python=yes], [enable_python=no])
> > +[
> > + AS_HELP_STRING([--enable-python-bindings], [compile Python bindings])
> > +],
> > +[
> > + enable_python=yes
> > +],
> > +[
> > + enable_python=no
> > +])
> >
> > AM_CONDITIONAL([USE_PYTHON], [test "x${enable_python:-yes}" = xyes])
> >
> > if test "x${enable_python:-yes}" = xyes; then
> > - AX_PKG_SWIG($swig_version, [], [ AC_MSG_ERROR([SWIG $swig_version or newer is needed]) ])
> > - AM_PATH_PYTHON
> > -
> > - AC_ARG_VAR([PYTHON_INCLUDE], [Include flags for python, bypassing python-config])
> > - AC_ARG_VAR([PYTHON_CONFIG], [Path to python-config])
> > - AS_IF([test -z "$PYTHON_INCLUDE"], [
> > - AS_IF([test -z "$PYTHON_CONFIG"], [
> > - AC_PATH_PROGS([PYTHON_CONFIG],
> > - [python$PYTHON_VERSION-config python-config],
> > - [no],
> > - [`dirname $PYTHON`])
> > - AS_IF([test "$PYTHON_CONFIG" = no], [AC_MSG_ERROR([cannot find python-config for $PYTHON. Do you have python-dev installed?])])
> > - ])
> > - AC_MSG_CHECKING([python include flags])
> > - PYTHON_INCLUDE=`$PYTHON_CONFIG --includes`
> > - AC_MSG_RESULT([$PYTHON_INCLUDE])
> > - ])
> > -
> > + AX_PKG_SWIG($swig_version, [],
> > + [
> > + AC_MSG_ERROR([SWIG $swig_version or newer is needed])
> > + ])
> > + AM_PATH_PYTHON
> > + AC_ARG_VAR([PYTHON_INCLUDE], [Include flags for python, bypassing python-config])
> > + AC_ARG_VAR([PYTHON_CONFIG], [Path to python-config])
> > + AS_IF([test -z "$PYTHON_INCLUDE"],
> > + [
> > + AS_IF([test -z "$PYTHON_CONFIG"],
> > + [
> > + AC_PATH_PROGS([PYTHON_CONFIG], [python$PYTHON_VERSION-config python-config], [no], [`dirname $PYTHON`])
> > + AS_IF([test "$PYTHON_CONFIG" = no],
> > + [
> > + AC_MSG_ERROR([cannot find python-config for $PYTHON. Do you have python-dev installed?])
> > + ])
> > + ])
> > + AC_MSG_CHECKING([python include flags])
> > + PYTHON_INCLUDE=`$PYTHON_CONFIG --includes`
> > + AC_MSG_RESULT([$PYTHON_INCLUDE])
> > + ])
> > else
> > - AC_MSG_NOTICE([You may configure with --enable-python-bindings ]dnl
> > -[if you want Python bindings.])
> > -
> > + AC_MSG_NOTICE([You may configure with --enable-python-bindings if you want Python bindings.])
> > fi
> >
> > -# Option to only build the consumer daemon and its libraries
> > -AC_ARG_WITH([consumerd-only],
> > - AS_HELP_STRING([--with-consumerd-only],[Only build the consumer daemon [default=no]]),
> > - [consumerd_only=$withval],
> > - [consumerd_only=no])
> > -AM_CONDITIONAL([BUILD_CONSUMERD_ONLY], [test "x$consumerd_only" = "xyes"])
> > -
> > # Epoll check. If not present, the build will fallback on poll() API
> > -AX_HAVE_EPOLL(
> > - [AX_CONFIG_FEATURE_ENABLE(epoll)],
> > - [AX_CONFIG_FEATURE_DISABLE(epoll)]
> > -)
> > -AX_CONFIG_FEATURE(
> > - [epoll], [This platform supports epoll(7)],
> > - [HAVE_EPOLL], [This platform supports epoll(7).],
> > - [enable_epoll="yes"], [enable_epoll="no"]
> > -)
> > +AX_HAVE_EPOLL([AX_CONFIG_FEATURE_ENABLE(epoll)],[AX_CONFIG_FEATURE_DISABLE(epoll)])
> > +AX_CONFIG_FEATURE([epoll], [This platform supports epoll(7)],
> > + [HAVE_EPOLL], [This platform supports epoll(7).],
> > + [enable_epoll="yes"], [enable_epoll="no"])
> > AM_CONDITIONAL([COMPAT_EPOLL], [ test "$enable_epoll" = "yes" ])
> >
> > AC_SYS_LARGEFILE
> > @@ -455,37 +469,43 @@ AS_ECHO()
> > # Target architecture we're building for
> > target_arch=$host_cpu
> > [
> > -for f in $CFLAGS; do
> > - if test $f = "-m32"; then
> > + for f in $CFLAGS; do
> > + if test $f = "-m32"; then
> > target_arch="32-bit"
> > - elif test $f = "-m64"; then
> > + elif test $f = "-m64"; then
> > target_arch="64-bit"
> > - fi
> > -done
> > + fi
> > + done
> > ]
> > AS_ECHO_N("Target architecture: ")
> > AS_ECHO($target_arch)
> >
> > # LTTng-UST enabled/disabled
> > AS_ECHO_N("Lttng-UST support: ")
> > -AS_IF([test "x$lttng_ust_support" = "xyes"],[
> > +AS_IF([test "x$lttng_ust_support" = "xyes"],
> > +[
> > AS_ECHO("Enabled")
> > -],[
> > +],
> > +[
> > AS_ECHO("Disabled")
> > ])
> >
> > #Python binding enabled/disabled
> > AS_ECHO_N("Python binding: ")
> > -AS_IF([test "x${enable_python:-yes}" = xyes], [
> > +AS_IF([test "x${enable_python:-yes}" = xyes],
> > +[
> > AS_ECHO("Enabled")
> > -],[
> > +],
> > +[
> > AS_ECHO("Disabled")
> > ])
> >
> > # Do we build only the consumerd, or everything
> > -AS_IF([test "x$consumerd_only" = "xyes"],[
> > +AS_IF([test "x$consumerd_only" = "xyes"],
> > +[
> > AS_ECHO("Only the consumerd daemon will be built.")
> > -],[
> > +],
> > +[
> > AS_ECHO("All binaries will be built.")
> > ])
> >
> > @@ -497,45 +517,52 @@ AS_ECHO_N("Libraries will be installed in: ")
> > AS_ECHO("`eval eval echo $libdir`")
> >
> > # If we build the sessiond, print the paths it will use
> > -AS_IF([test "x$consumerd_only" = "xno"],[
> > +AS_IF([test "x$consumerd_only" = "xno"],
> > +[
> > AS_ECHO()
> > AS_ECHO_N("The lttng command will look for the lttng-sessiond executable at: ")
> > - AS_IF([test "$SESSIOND_BIN" = ""],[
> > + AS_IF([test "$SESSIOND_BIN" = ""],
> > + [
> > AS_ECHO_N("`eval eval echo $bindir`")
> > AS_ECHO("/lttng-sessiond")
> > - ],[
> > + ],
> > + [
> > AS_ECHO("$SESSIOND_BIN")
> > ])
> > -
> > AS_ECHO()
> > AS_ECHO("The sessiond daemon will look in the following directories: ")
> > AS_ECHO_N("32-bit consumerd executable at: ")
> > - AS_IF([test "$CONSUMERD32_BIN" = ""],[
> > + AS_IF([test "$CONSUMERD32_BIN" = ""],
> > + [
> > AS_ECHO_N("`eval eval echo $lttnglibexecdir`")
> > AS_ECHO("/lttng-consumerd")
> > - ],[
> > + ],
> > + [
> > AS_ECHO("$CONSUMERD32_BIN")
> > ])
> > -
> > AS_ECHO_N("32-bit consumer libraries in: ")
> > - AS_IF([test "$CONSUMERD32_LIBDIR" = ""],[
> > + AS_IF([test "$CONSUMERD32_LIBDIR" = ""],
> > + [
> > AS_ECHO("`eval eval echo $libdir`")
> > - ],[
> > + ],
> > + [
> > AS_ECHO("$CONSUMERD32_LIBDIR")
> > ])
> > -
> > AS_ECHO_N("64-bit consumerd executable at: ")
> > - AS_IF([test "$CONSUMERD64_BIN" = ""],[
> > + AS_IF([test "$CONSUMERD64_BIN" = ""],
> > + [
> > AS_ECHO_N("`eval eval echo $lttnglibexecdir`")
> > AS_ECHO("/lttng-consumerd")
> > - ],[
> > + ],
> > + [
> > AS_ECHO("$CONSUMERD64_BIN")
> > ])
> > -
> > AS_ECHO_N("64-bit consumer libraries in: ")
> > - AS_IF([test "$CONSUMERD64_LIBDIR" = ""],[
> > + AS_IF([test "$CONSUMERD64_LIBDIR" = ""],
> > + [
> > AS_ECHO("`eval eval echo $libdir`")
> > - ],[
> > + ],
> > + [
> > AS_ECHO("$CONSUMERD64_LIBDIR")
> > ])
> > ])
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev at lists.lttng.org
> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com
More information about the lttng-dev
mailing list