[lttng-dev] [PATCH lttng-ust 1/3] Cleanup tests
Mathieu Desnoyers
mathieu.desnoyers at efficios.com
Wed Jul 24 09:59:56 EDT 2013
* Zifei Tong (soariez at gmail.com) wrote:
> Move TAP related code to tests/utils.
> Remove scripts only used by obsolete tests.
This patch alone cannot be built without the following patches.
>
> Signed-off-by: Zifei Tong <soariez at gmail.com>
> ---
> configure.ac | 1 +
> tests/Makefile.am | 8 +-
> tests/snprintf/Makefile.am | 7 +-
> tests/tap.c | 433 ------------------------------------------
> tests/tap.h | 89 ---------
> tests/tap.sh | 456 ---------------------------------------------
> tests/test_functions.sh | 129 -------------
> tests/trace_matches | 104 -----------
> tests/utils/Makefile.am | 3 +
> tests/utils/tap.c | 433 ++++++++++++++++++++++++++++++++++++++++++
> tests/utils/tap.h | 89 +++++++++
> tests/utils/tap.sh | 456 +++++++++++++++++++++++++++++++++++++++++++++
> 12 files changed, 987 insertions(+), 1221 deletions(-)
> delete mode 100644 tests/tap.c
> delete mode 100644 tests/tap.h
> delete mode 100644 tests/tap.sh
> delete mode 100644 tests/test_functions.sh
> delete mode 100755 tests/trace_matches
> create mode 100644 tests/utils/Makefile.am
> create mode 100644 tests/utils/tap.c
> create mode 100644 tests/utils/tap.h
> create mode 100755 tests/utils/tap.sh
>
> diff --git a/configure.ac b/configure.ac
> index 84d121e..8b862ed 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -283,6 +283,7 @@ AC_CONFIG_FILES([
> tests/hello.cxx/Makefile
> tests/same_line_tracepoint/Makefile
> tests/snprintf/Makefile
> + tests/utils/Makefile
> lttng-ust.pc
> ])
>
> diff --git a/tests/Makefile.am b/tests/Makefile.am
> index 317edcb..d9a7a30 100644
> --- a/tests/Makefile.am
> +++ b/tests/Makefile.am
> @@ -1,14 +1,10 @@
> -SUBDIRS = . hello same_line_tracepoint snprintf
> +SUBDIRS = utils hello same_line_tracepoint snprintf benchmark
>
> if CXX_WORKS
> SUBDIRS += hello.cxx
> endif
>
> -dist_noinst_SCRIPTS = test_loop run.sh trace_matches unit_tests
> -
> -noinst_LIBRARIES = libtap.a
> -
> -libtap_a_SOURCES = tap.c tap.h
> +dist_noinst_SCRIPTS = test_loop run.sh unit_tests
>
> check-am:
> ./run.sh unit_tests
> diff --git a/tests/snprintf/Makefile.am b/tests/snprintf/Makefile.am
> index d9f9da0..2ceb948 100644
> --- a/tests/snprintf/Makefile.am
> +++ b/tests/snprintf/Makefile.am
> @@ -1,9 +1,8 @@
> -AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/tests/
> +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/tests/utils
>
> noinst_PROGRAMS = prog
> prog_SOURCES = prog.c
> prog_LDADD = $(top_builddir)/snprintf/libustsnprintf.la \
> - $(top_builddir)/tests/libtap.a
> + $(top_builddir)/tests/utils/libtap.a
>
> -noinst_SCRIPT = test_snprintf
> -EXTRA_DIST = test_snprintf
> +dist_noinst_SCRIPTS = test_snprintf
> diff --git a/tests/tap.c b/tests/tap.c
> deleted file mode 100644
> index 8bf72f6..0000000
> --- a/tests/tap.c
> +++ /dev/null
> @@ -1,433 +0,0 @@
> -/*-
> - * Copyright (c) 2004 Nik Clayton
> - * All rights reserved.
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions
> - * are met:
> - * 1. Redistributions of source code must retain the above copyright
> - * notice, this list of conditions and the following disclaimer.
> - * 2. Redistributions in binary form must reproduce the above copyright
> - * notice, this list of conditions and the following disclaimer in the
> - * documentation and/or other materials provided with the distribution.
> - *
> - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> - * SUCH DAMAGE.
> - */
> -
> -#define _GNU_SOURCE
> -#include <ctype.h>
> -#include <stdarg.h>
> -#include <stdio.h>
> -#include <stdlib.h>
> -
> -#include "tap.h"
> -
> -static int no_plan = 0;
> -static int skip_all = 0;
> -static int have_plan = 0;
> -static unsigned int test_count = 0; /* Number of tests that have been run */
> -static unsigned int e_tests = 0; /* Expected number of tests to run */
> -static unsigned int failures = 0; /* Number of tests that failed */
> -static char *todo_msg = NULL;
> -static char *todo_msg_fixed = "libtap malloc issue";
> -static int todo = 0;
> -static int test_died = 0;
> -
> -/* Encapsulate the pthread code in a conditional. In the absence of
> - libpthread the code does nothing */
> -#ifdef HAVE_LIBPTHREAD
> -#include <pthread.h>
> -static pthread_mutex_t M = PTHREAD_MUTEX_INITIALIZER;
> -# define LOCK pthread_mutex_lock(&M);
> -# define UNLOCK pthread_mutex_unlock(&M);
> -#else
> -# define LOCK
> -# define UNLOCK
> -#endif
> -
> -static void _expected_tests(unsigned int);
> -static void _tap_init(void);
> -static void _cleanup(void);
> -
> -/*
> - * Generate a test result.
> - *
> - * ok -- boolean, indicates whether or not the test passed.
> - * test_name -- the name of the test, may be NULL
> - * test_comment -- a comment to print afterwards, may be NULL
> - */
> -unsigned int
> -_gen_result(int ok, const char *func, char *file, unsigned int line,
> - char *test_name, ...)
> -{
> - va_list ap;
> - char *local_test_name = NULL;
> - char *c;
> - int name_is_digits;
> -
> - LOCK;
> -
> - test_count++;
> -
> - /* Start by taking the test name and performing any printf()
> - expansions on it */
> - if(test_name != NULL) {
> - va_start(ap, test_name);
> - if (vasprintf(&local_test_name, test_name, ap) == -1) {
> - local_test_name = NULL;
> - }
> - va_end(ap);
> -
> - /* Make sure the test name contains more than digits
> - and spaces. Emit an error message and exit if it
> - does */
> - if(local_test_name) {
> - name_is_digits = 1;
> - for(c = local_test_name; *c != '\0'; c++) {
> - if(!isdigit(*c) && !isspace(*c)) {
> - name_is_digits = 0;
> - break;
> - }
> - }
> -
> - if(name_is_digits) {
> - diag(" You named your test '%s'. You shouldn't use numbers for your test names.", local_test_name);
> - diag(" Very confusing.");
> - }
> - }
> - }
> -
> - if(!ok) {
> - printf("not ");
> - failures++;
> - }
> -
> - printf("ok %d", test_count);
> -
> - if(test_name != NULL) {
> - printf(" - ");
> -
> - /* Print the test name, escaping any '#' characters it
> - might contain */
> - if(local_test_name != NULL) {
> - flockfile(stdout);
> - for(c = local_test_name; *c != '\0'; c++) {
> - if(*c == '#')
> - fputc('\\', stdout);
> - fputc((int)*c, stdout);
> - }
> - funlockfile(stdout);
> - } else { /* vasprintf() failed, use a fixed message */
> - printf("%s", todo_msg_fixed);
> - }
> - }
> -
> - /* If we're in a todo_start() block then flag the test as being
> - TODO. todo_msg should contain the message to print at this
> - point. If it's NULL then asprintf() failed, and we should
> - use the fixed message.
> -
> - This is not counted as a failure, so decrement the counter if
> - the test failed. */
> - if(todo) {
> - printf(" # TODO %s", todo_msg ? todo_msg : todo_msg_fixed);
> - if(!ok)
> - failures--;
> - }
> -
> - printf("\n");
> -
> - if(!ok) {
> - if(getenv("HARNESS_ACTIVE") != NULL)
> - fputs("\n", stderr);
> -
> - diag(" Failed %stest (%s:%s() at line %d)",
> - todo ? "(TODO) " : "", file, func, line);
> - }
> - free(local_test_name);
> -
> - UNLOCK;
> -
> - /* We only care (when testing) that ok is positive, but here we
> - specifically only want to return 1 or 0 */
> - return ok ? 1 : 0;
> -}
> -
> -/*
> - * Initialise the TAP library. Will only do so once, however many times it's
> - * called.
> - */
> -void
> -_tap_init(void)
> -{
> - static int run_once = 0;
> -
> - if(!run_once) {
> - atexit(_cleanup);
> -
> - /* stdout needs to be unbuffered so that the output appears
> - in the same place relative to stderr output as it does
> - with Test::Harness */
> - setbuf(stdout, 0);
> - run_once = 1;
> - }
> -}
> -
> -/*
> - * Note that there's no plan.
> - */
> -int
> -plan_no_plan(void)
> -{
> -
> - LOCK;
> -
> - _tap_init();
> -
> - if(have_plan != 0) {
> - fprintf(stderr, "You tried to plan twice!\n");
> - test_died = 1;
> - UNLOCK;
> - exit(255);
> - }
> -
> - have_plan = 1;
> - no_plan = 1;
> -
> - UNLOCK;
> -
> - return 1;
> -}
> -
> -/*
> - * Note that the plan is to skip all tests
> - */
> -int
> -plan_skip_all(char *reason)
> -{
> -
> - LOCK;
> -
> - _tap_init();
> -
> - skip_all = 1;
> -
> - printf("1..0");
> -
> - if(reason != NULL)
> - printf(" # Skip %s", reason);
> -
> - printf("\n");
> -
> - UNLOCK;
> -
> - exit(0);
> -}
> -
> -/*
> - * Note the number of tests that will be run.
> - */
> -int
> -plan_tests(unsigned int tests)
> -{
> -
> - LOCK;
> -
> - _tap_init();
> -
> - if(have_plan != 0) {
> - fprintf(stderr, "You tried to plan twice!\n");
> - test_died = 1;
> - UNLOCK;
> - exit(255);
> - }
> -
> - if(tests == 0) {
> - fprintf(stderr, "You said to run 0 tests! You've got to run something.\n");
> - test_died = 1;
> - UNLOCK;
> - exit(255);
> - }
> -
> - have_plan = 1;
> -
> - _expected_tests(tests);
> -
> - UNLOCK;
> -
> - return e_tests;
> -}
> -
> -unsigned int
> -diag(char *fmt, ...)
> -{
> - va_list ap;
> -
> - fputs("# ", stderr);
> -
> - va_start(ap, fmt);
> - vfprintf(stderr, fmt, ap);
> - va_end(ap);
> -
> - fputs("\n", stderr);
> -
> - return 0;
> -}
> -
> -void
> -_expected_tests(unsigned int tests)
> -{
> -
> - printf("1..%d\n", tests);
> - e_tests = tests;
> -}
> -
> -int
> -skip(unsigned int n, char *fmt, ...)
> -{
> - va_list ap;
> - char *skip_msg = NULL;
> -
> - LOCK;
> -
> - va_start(ap, fmt);
> - if (asprintf(&skip_msg, fmt, ap) == -1) {
> - skip_msg = NULL;
> - }
> - va_end(ap);
> -
> - while(n-- > 0) {
> - test_count++;
> - printf("ok %d # skip %s\n", test_count,
> - skip_msg != NULL ?
> - skip_msg : "libtap():malloc() failed");
> - }
> -
> - free(skip_msg);
> -
> - UNLOCK;
> -
> - return 1;
> -}
> -
> -void
> -todo_start(char *fmt, ...)
> -{
> - va_list ap;
> -
> - LOCK;
> -
> - va_start(ap, fmt);
> - if (vasprintf(&todo_msg, fmt, ap) == -1) {
> - todo_msg = NULL;
> - }
> - va_end(ap);
> -
> - todo = 1;
> -
> - UNLOCK;
> -}
> -
> -void
> -todo_end(void)
> -{
> -
> - LOCK;
> -
> - todo = 0;
> - free(todo_msg);
> -
> - UNLOCK;
> -}
> -
> -int
> -exit_status(void)
> -{
> - int r;
> -
> - LOCK;
> -
> - /* If there's no plan, just return the number of failures */
> - if(no_plan || !have_plan) {
> - UNLOCK;
> - return failures;
> - }
> -
> - /* Ran too many tests? Return the number of tests that were run
> - that shouldn't have been */
> - if(e_tests < test_count) {
> - r = test_count - e_tests;
> - UNLOCK;
> - return r;
> - }
> -
> - /* Return the number of tests that failed + the number of tests
> - that weren't run */
> - r = failures + e_tests - test_count;
> - UNLOCK;
> -
> - return r;
> -}
> -
> -/*
> - * Cleanup at the end of the run, produce any final output that might be
> - * required.
> - */
> -void
> -_cleanup(void)
> -{
> -
> - LOCK;
> -
> - /* If plan_no_plan() wasn't called, and we don't have a plan,
> - and we're not skipping everything, then something happened
> - before we could produce any output */
> - if(!no_plan && !have_plan && !skip_all) {
> - diag("Looks like your test died before it could output anything.");
> - UNLOCK;
> - return;
> - }
> -
> - if(test_died) {
> - diag("Looks like your test died just after %d.", test_count);
> - UNLOCK;
> - return;
> - }
> -
> -
> - /* No plan provided, but now we know how many tests were run, and can
> - print the header at the end */
> - if(!skip_all && (no_plan || !have_plan)) {
> - printf("1..%d\n", test_count);
> - }
> -
> - if((have_plan && !no_plan) && e_tests < test_count) {
> - diag("Looks like you planned %d %s but ran %d extra.",
> - e_tests, e_tests == 1 ? "test" : "tests", test_count - e_tests);
> - UNLOCK;
> - return;
> - }
> -
> - if((have_plan || !no_plan) && e_tests > test_count) {
> - diag("Looks like you planned %d %s but only ran %d.",
> - e_tests, e_tests == 1 ? "test" : "tests", test_count);
> - UNLOCK;
> - return;
> - }
> -
> - if(failures)
> - diag("Looks like you failed %d %s of %d.",
> - failures, failures == 1 ? "test" : "tests", test_count);
> -
> - UNLOCK;
> -}
> diff --git a/tests/tap.h b/tests/tap.h
> deleted file mode 100644
> index 0f05943..0000000
> --- a/tests/tap.h
> +++ /dev/null
> @@ -1,89 +0,0 @@
> -/*-
> - * Copyright (c) 2004 Nik Clayton
> - * All rights reserved.
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions
> - * are met:
> - * 1. Redistributions of source code must retain the above copyright
> - * notice, this list of conditions and the following disclaimer.
> - * 2. Redistributions in binary form must reproduce the above copyright
> - * notice, this list of conditions and the following disclaimer in the
> - * documentation and/or other materials provided with the distribution.
> - *
> - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> - * SUCH DAMAGE.
> - */
> -
> -/* '## __VA_ARGS__' is a gcc'ism. C99 doesn't allow the token pasting
> - and requires the caller to add the final comma if they've ommitted
> - the optional arguments */
> -#ifdef __GNUC__
> -# define ok(e, test, ...) ((e) ? \
> - _gen_result(1, __func__, __FILE__, __LINE__, \
> - test, ## __VA_ARGS__) : \
> - _gen_result(0, __func__, __FILE__, __LINE__, \
> - test, ## __VA_ARGS__))
> -
> -# define ok1(e) ((e) ? \
> - _gen_result(1, __func__, __FILE__, __LINE__, "%s", #e) : \
> - _gen_result(0, __func__, __FILE__, __LINE__, "%s", #e))
> -
> -# define pass(test, ...) ok(1, test, ## __VA_ARGS__);
> -# define fail(test, ...) ok(0, test, ## __VA_ARGS__);
> -
> -# define skip_start(test, n, fmt, ...) \
> - do { \
> - if((test)) { \
> - skip(n, fmt, ## __VA_ARGS__); \
> - continue; \
> - }
> -#elif __STDC_VERSION__ >= 199901L /* __GNUC__ */
> -# define ok(e, ...) ((e) ? \
> - _gen_result(1, __func__, __FILE__, __LINE__, \
> - __VA_ARGS__) : \
> - _gen_result(0, __func__, __FILE__, __LINE__, \
> - __VA_ARGS__))
> -
> -# define ok1(e) ((e) ? \
> - _gen_result(1, __func__, __FILE__, __LINE__, "%s", #e) : \
> - _gen_result(0, __func__, __FILE__, __LINE__, "%s", #e))
> -
> -# define pass(...) ok(1, __VA_ARGS__);
> -# define fail(...) ok(0, __VA_ARGS__);
> -
> -# define skip_start(test, n, ...) \
> - do { \
> - if((test)) { \
> - skip(n, __VA_ARGS__); \
> - continue; \
> - }
> -#else /* __STDC_VERSION__ */
> -# error "Needs gcc or C99 compiler for variadic macros."
> -#endif /* __STDC_VERSION__ */
> -
> -#define skip_end() } while(0);
> -
> -unsigned int _gen_result(int, const char *, char *, unsigned int, char *, ...);
> -
> -int plan_no_plan(void);
> -int plan_skip_all(char *);
> -int plan_tests(unsigned int);
> -
> -unsigned int diag(char *, ...);
> -
> -int skip(unsigned int, char *, ...);
> -
> -void todo_start(char *, ...);
> -void todo_end(void);
> -
> -int exit_status(void);
> diff --git a/tests/tap.sh b/tests/tap.sh
> deleted file mode 100644
> index 24ac1aa..0000000
> --- a/tests/tap.sh
> +++ /dev/null
> @@ -1,456 +0,0 @@
> -#!/bin/bash
> -#
> -# Copyright 2010 Patrick LeBoutillier <patrick.leboutillier at gmail.com>
> -#
> -# This program is free software: you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation, either version 3 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program. If not, see <http://www.gnu.org/licenses/>.
> -
> -
> -_version='1.01'
> -
> -_plan_set=0
> -_no_plan=0
> -_skip_all=0
> -_test_died=0
> -_expected_tests=0
> -_executed_tests=0
> -_failed_tests=0
> -TODO=
> -
> -
> -usage(){
> - cat <<'USAGE'
> -tap-functions: A TAP-producing BASH library
> -
> -PLAN:
> - plan_no_plan
> - plan_skip_all [REASON]
> - plan_tests NB_TESTS
> -
> -TEST:
> - ok RESULT [NAME]
> - okx COMMAND
> - is RESULT EXPECTED [NAME]
> - isnt RESULT EXPECTED [NAME]
> - like RESULT PATTERN [NAME]
> - unlike RESULT PATTERN [NAME]
> - pass [NAME]
> - fail [NAME]
> -
> -SKIP:
> - skip [CONDITION] [REASON] [NB_TESTS=1]
> -
> - skip $feature_not_present "feature not present" 2 || {
> - is $a "a"
> - is $b "b"
> - }
> -
> -TODO:
> - Specify TODO mode by setting $TODO:
> - TODO="not implemented yet"
> - ok $result "some not implemented test"
> - unset TODO
> -
> -OTHER:
> - diag MSG
> -
> -EXAMPLE:
> - #!/bin/bash
> -
> - . tap-functions
> -
> - plan_tests 7
> -
> - me=$USER
> - is $USER $me "I am myself"
> - like $HOME $me "My home is mine"
> - like "`id`" $me "My id matches myself"
> -
> - /bin/ls $HOME 1>&2
> - ok $? "/bin/ls $HOME"
> - # Same thing using okx shortcut
> - okx /bin/ls $HOME
> -
> - [[ "`id -u`" != "0" ]]
> - i_am_not_root=$?
> - skip $i_am_not_root "Must be root" || {
> - okx ls /root
> - }
> -
> - TODO="figure out how to become root..."
> - okx [ "$HOME" == "/root" ]
> - unset TODO
> -USAGE
> - exit
> -}
> -
> -opt=
> -set_u=
> -while getopts ":sx" opt ; do
> - case $_opt in
> - u) set_u=1 ;;
> - *) usage ;;
> - esac
> -done
> -shift $(( OPTIND - 1 ))
> -# Don't allow uninitialized variables if requested
> -[[ -n "$set_u" ]] && set -u
> -unset opt set_u
> -
> -# Used to call _cleanup on shell exit
> -trap _exit EXIT
> -
> -
> -plan_no_plan(){
> - (( _plan_set != 0 )) && "You tried to plan twice!"
> -
> - _plan_set=1
> - _no_plan=1
> -
> - return 0
> -}
> -
> -
> -plan_skip_all(){
> - local reason=${1:-''}
> -
> - (( _plan_set != 0 )) && _die "You tried to plan twice!"
> -
> - _print_plan 0 "Skip $reason"
> -
> - _skip_all=1
> - _plan_set=1
> - _exit 0
> -
> - return 0
> -}
> -
> -plan_tests(){
> - local tests=${1:?}
> -
> - (( _plan_set != 0 )) && _die "You tried to plan twice!"
> - (( tests == 0 )) && _die "You said to run 0 tests! You've got to run something."
> -
> - _print_plan $tests
> - _expected_tests=$tests
> - _plan_set=1
> -
> - return $tests
> -}
> -
> -
> -_print_plan(){
> - local tests=${1:?}
> - local directive=${2:-''}
> -
> - echo -n "1..$tests"
> - [[ -n "$directive" ]] && echo -n " # $directive"
> - echo
> -}
> -
> -
> -pass(){
> - local name=$1
> - ok 0 "$name"
> -}
> -
> -
> -fail(){
> - local name=$1
> - ok 1 "$name"
> -}
> -
> -# This is the workhorse method that actually
> -# prints the tests result.
> -ok(){
> - local result=${1:?}
> - local name=${2:-''}
> -
> - (( _plan_set == 0 )) && _die "You tried to run a test without a plan! Gotta have a plan."
> -
> - _executed_tests=$(( $_executed_tests + 1 ))
> -
> - if [[ -n "$name" ]] ; then
> - if _matches "$name" "^[0-9]+$" ; then
> - diag " You named your test '$name'. You shouldn't use numbers for your test names."
> - diag " Very confusing."
> - fi
> - fi
> -
> - if (( result != 0 )) ; then
> - echo -n "not "
> - _failed_tests=$(( _failed_tests + 1 ))
> - fi
> - echo -n "ok $_executed_tests"
> -
> - if [[ -n "$name" ]] ; then
> - local ename=${name//\#/\\#}
> - echo -n " - $ename"
> - fi
> -
> - if [[ -n "$TODO" ]] ; then
> - echo -n " # TODO $TODO" ;
> - if (( result != 0 )) ; then
> - _failed_tests=$(( _failed_tests - 1 ))
> - fi
> - fi
> -
> - echo
> - if (( result != 0 )) ; then
> - local file='tap-functions'
> - local func=
> - local line=
> -
> - local i=0
> - local bt=$(caller $i)
> - while _matches "$bt" "tap-functions$" ; do
> - i=$(( $i + 1 ))
> - bt=$(caller $i)
> - done
> - local backtrace=
> - eval $(caller $i | (read line func file ; echo "backtrace=\"$file:$func() at line $line.\""))
> -
> - local t=
> - [[ -n "$TODO" ]] && t="(TODO) "
> -
> - if [[ -n "$name" ]] ; then
> - diag " Failed ${t}test '$name'"
> - diag " in $backtrace"
> - else
> - diag " Failed ${t}test in $backtrace"
> - fi
> - fi
> -
> - return $result
> -}
> -
> -
> -okx(){
> - local command="$@"
> -
> - local line=
> - diag "Output of '$command':"
> - "$@" | while read line ; do
> - diag "$line"
> - done
> - ok ${PIPESTATUS[0]} "$command"
> -}
> -
> -
> -_equals(){
> - local result=${1:?}
> - local expected=${2:?}
> -
> - if [[ "$result" == "$expected" ]] ; then
> - return 0
> - else
> - return 1
> - fi
> -}
> -
> -
> -# Thanks to Aaron Kangas for the patch to allow regexp matching
> -# under bash < 3.
> - _bash_major_version=${BASH_VERSION%%.*}
> -_matches(){
> - local result=${1:?}
> - local pattern=${2:?}
> -
> - if [[ -z "$result" || -z "$pattern" ]] ; then
> - return 1
> - else
> - if (( _bash_major_version >= 3 )) ; then
> - [[ "$result" =~ "$pattern" ]]
> - else
> - echo "$result" | egrep -q "$pattern"
> - fi
> - fi
> -}
> -
> -
> -_is_diag(){
> - local result=${1:?}
> - local expected=${2:?}
> -
> - diag " got: '$result'"
> - diag " expected: '$expected'"
> -}
> -
> -
> -is(){
> - local result=${1:?}
> - local expected=${2:?}
> - local name=${3:-''}
> -
> - _equals "$result" "$expected"
> - (( $? == 0 ))
> - ok $? "$name"
> - local r=$?
> - (( r != 0 )) && _is_diag "$result" "$expected"
> - return $r
> -}
> -
> -
> -isnt(){
> - local result=${1:?}
> - local expected=${2:?}
> - local name=${3:-''}
> -
> - _equals "$result" "$expected"
> - (( $? != 0 ))
> - ok $? "$name"
> - local r=$?
> - (( r != 0 )) && _is_diag "$result" "$expected"
> - return $r
> -}
> -
> -
> -like(){
> - local result=${1:?}
> - local pattern=${2:?}
> - local name=${3:-''}
> -
> - _matches "$result" "$pattern"
> - (( $? == 0 ))
> - ok $? "$name"
> - local r=$?
> - (( r != 0 )) && diag " '$result' doesn't match '$pattern'"
> - return $r
> -}
> -
> -
> -unlike(){
> - local result=${1:?}
> - local pattern=${2:?}
> - local name=${3:-''}
> -
> - _matches "$result" "$pattern"
> - (( $? != 0 ))
> - ok $? "$name"
> - local r=$?
> - (( r != 0 )) && diag " '$result' matches '$pattern'"
> - return $r
> -}
> -
> -
> -skip(){
> - local condition=${1:?}
> - local reason=${2:-''}
> - local n=${3:-1}
> -
> - if (( condition == 0 )) ; then
> - local i=
> - for (( i=0 ; i<$n ; i++ )) ; do
> - _executed_tests=$(( _executed_tests + 1 ))
> - echo "ok $_executed_tests # skip: $reason"
> - done
> - return 0
> - else
> - return
> - fi
> -}
> -
> -
> -diag(){
> - local msg=${1:?}
> -
> - if [[ -n "$msg" ]] ; then
> - echo "# $msg"
> - fi
> -
> - return 1
> -}
> -
> -
> -_die(){
> - local reason=${1:-'<unspecified error>'}
> -
> - echo "$reason" >&2
> - _test_died=1
> - _exit 255
> -}
> -
> -
> -BAIL_OUT(){
> - local reason=${1:-''}
> -
> - echo "Bail out! $reason" >&2
> - _exit 255
> -}
> -
> -
> -_cleanup(){
> - local rc=0
> -
> - if (( _plan_set == 0 )) ; then
> - diag "Looks like your test died before it could output anything."
> - return $rc
> - fi
> -
> - if (( _test_died != 0 )) ; then
> - diag "Looks like your test died just after $_executed_tests."
> - return $rc
> - fi
> -
> - if (( _skip_all == 0 && _no_plan != 0 )) ; then
> - _print_plan $_executed_tests
> - fi
> -
> - local s=
> - if (( _no_plan == 0 && _expected_tests < _executed_tests )) ; then
> - s= ; (( _expected_tests > 1 )) && s=s
> - local extra=$(( _executed_tests - _expected_tests ))
> - diag "Looks like you planned $_expected_tests test$s but ran $extra extra."
> - rc=1 ;
> - fi
> -
> - if (( _no_plan == 0 && _expected_tests > _executed_tests )) ; then
> - s= ; (( _expected_tests > 1 )) && s=s
> - diag "Looks like you planned $_expected_tests test$s but only ran $_executed_tests."
> - fi
> -
> - if (( _failed_tests > 0 )) ; then
> - s= ; (( _failed_tests > 1 )) && s=s
> - diag "Looks like you failed $_failed_tests test$s of $_executed_tests."
> - fi
> -
> - return $rc
> -}
> -
> -
> -_exit_status(){
> - if (( _no_plan != 0 || _plan_set == 0 )) ; then
> - return $_failed_tests
> - fi
> -
> - if (( _expected_tests < _executed_tests )) ; then
> - return $(( _executed_tests - _expected_tests ))
> - fi
> -
> - return $(( _failed_tests + ( _expected_tests - _executed_tests )))
> -}
> -
> -
> -_exit(){
> - local rc=${1:-''}
> - if [[ -z "$rc" ]] ; then
> - _exit_status
> - rc=$?
> - fi
> -
> - _cleanup
> - local alt_rc=$?
> - (( alt_rc != 0 )) && rc=$alt_rc
> - trap - EXIT
> - exit $rc
> -}
> diff --git a/tests/test_functions.sh b/tests/test_functions.sh
> deleted file mode 100644
> index c4e913b..0000000
> --- a/tests/test_functions.sh
> +++ /dev/null
> @@ -1,129 +0,0 @@
> -#!/bin/bash
> -#
> -# Copyright 2010 Ericsson AB
> -#
> -# This file is part of LTTng-UST.
> -#
> -# LTTng-UST is free software: you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation, either version 3 of the License, or
> -# (at your option) any later version.
> -#
> -# LTTng-UST is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with LTTng-UST. If not, see <http://www.gnu.org/licenses/>.
> -
> -function starttest() {
> -
> - echo "------------------------------------"
> - echo "Starting test: $1"
> - echo "------------------------------------"
> -}
> -
> -function check_trace_logs() {
> - TRACE=$1
> -
> - for f in $(ls $1/*.log); do
> - NLINES=$(egrep "Warning|Error" $f | wc -l)
> - if [ "$NLINES" -ne "0" ]; then
> - fail "Errors/warnings found in $f"
> - return 1;
> - fi
> - done
> - pass "$f was consistent"
> - return 0;
> -}
> -
> -
> -function trace_matches() {
> - local OPTIND=
> -
> - #Get a textdump command
> - # if RUNLTTV is defined try to use it
> - # if LTTV variable is defined try to use it
> - # try to find lttv in the path
> - # try to find runlttv in std paths (devel/lttv/runlttv and ust/../lttv/runlttv
> -
> - if [ ! -d "$RUNLTTV" -a -x "$RUNLTTV" ]; then
> - LTTV_TEXTDUMP_CMD="$RUNLTTV -m text "
> - LTTV_TRACE_PREFIX=""
> -
> - elif [ -d "$RUNLTTV" -a -x "$RUNLTTV/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="$RUNLTTV/runlttv -m text "
> - LTTV_TRACE_PREFIX=""
> -
> - elif [ ! -d "$LTTV" -a -x "$LTTV" ]; then
> - LTTV_TEXTDUMP_CMD="$LTTV -m textDump "
> - LTTV_TRACE_PREFIX="-t"
> -
> - elif [ -d "$LTTV" -a -x "$LTTV/lttv" ]; then
> - LTTV_TEXTDUMP_CMD="$LTTV/lttv -m textDump "
> - LTTV_TRACE_PREFIX="-t"
> -
> - elif [ -x "$(which lttv.real)" ]; then
> - LTTV_TEXTDUMP_CMD="$(which lttv.real) -m textDump ";
> - LTTV_TRACE_PREFIX="-t"
> -
> - elif [ -x "~/devel/lttv/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="~/devel/lttv/runlttv -m text ";
> - LTTV_TRACE_PREFIX=""
> -
> - elif [ -x "$(dirname `readlink -f $0`)/../../lttv/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="$(dirname `readlink -f $0`)/../../lttv/runlttv -m text "
> - LTTV_TRACE_PREFIX=""
> -
> - else
> - echo "$0: No lttv found. Edit \$RUNLTTV to point to your lttv source directory or \$LTTV to you lttv executable." 1>&2
> - exit 1;
> -
> - fi
> -
> - while getopts ":n:N:" options; do
> - case "$options" in
> - n) expected_count=$OPTARG;;
> - N) name=$OPTARG;;
> - *) echo "Invalid option to trace_matches"
> - exit 1;;
> - esac
> - done
> - shift $(($OPTIND - 1))
> -
> - pattern=$1
> - if [ -z "$pattern" ]; then
> - error "no pattern specified"
> - usage
> - exit 1
> - fi
> -
> - if [ -z "$2" ]; then
> - error "no trace directory specified"
> - return 1
> - fi
> - traces=$(find "$2" -mindepth 1 -maxdepth 1 -type d)
> - lttv_trace_cmd=$LTTV_TEXTDUMP_CMD
> - for trace in $traces; do
> - lttv_trace_cmd="$lttv_trace_cmd $LTTV_TRACE_PREFIX $trace"
> - done
> - cnt=$($lttv_trace_cmd | grep "$pattern" | wc -l)
> - if [ -z "$expected_count" ]; then
> - if [ "$cnt" -eq "0" ]; then
> - fail "Did not find at least one instance of $name in trace"
> - return 1
> - else
> - pass "Found at least one instance of $name in trace."
> - return 0
> - fi
> - else
> - if [ "$cnt" -ne "$expected_count" ]; then
> - fail "Found $cnt instances of $name in trace, expected $expected_count"
> - return 1
> - else
> - pass "Found $cnt instances of $name in trace."
> - return 0
> - fi
> - fi
> -}
> diff --git a/tests/trace_matches b/tests/trace_matches
> deleted file mode 100755
> index da3d954..0000000
> --- a/tests/trace_matches
> +++ /dev/null
> @@ -1,104 +0,0 @@
> -#!/bin/bash
> -
> -function error() {
> - echo "$0: $@" 1>&2
> -}
> -
> -function usage() {
> - echo "Usage: $0 [ -N pattern_name ] [ -n pattern_count ] PATTERN TRACE_PARENT_DIR"
> -}
> -
> -#Get a textdump command
> -# if RUNLTTV is defined try to use it
> -# if LTTV variable is defined try to use it
> -# try to find lttv in the path
> -# try to find runlttv in std paths (devel/lttv/runlttv and ust/../lttv/runlttv
> -
> -if [ ! -d "$RUNLTTV" -a -x "$RUNLTTV" ]; then
> - LTTV_TEXTDUMP_CMD="$RUNLTTV -m text "
> - LTTV_TRACE_PREFIX=""
> -
> -elif [ -d "$RUNLTTV" -a -x "$RUNLTTV/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="$RUNLTTV/runlttv -m text "
> - LTTV_TRACE_PREFIX=""
> -
> -elif [ ! -d "$LTTV" -a -x "$LTTV" ]; then
> - LTTV_TEXTDUMP_CMD="$LTTV -m textDump "
> - LTTV_TRACE_PREFIX="-t"
> -
> -elif [ -d "$LTTV" -a -x "$LTTV/lttv" ]; then
> - LTTV_TEXTDUMP_CMD="$LTTV/lttv -m textDump "
> - LTTV_TRACE_PREFIX="-t"
> -
> -elif [ -x "$(which lttv.real)" ]; then
> - LTTV_TEXTDUMP_CMD="$(which lttv.real) -m textDump ";
> - LTTV_TRACE_PREFIX="-t"
> -
> -elif [ -x "~/devel/lttv/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="~/devel/lttv/runlttv -m text ";
> - LTTV_TRACE_PREFIX=""
> -
> -elif [ -x "$(dirname `readlink -f $0`)/../../lttv/runlttv" ]; then
> - LTTV_TEXTDUMP_CMD="$(dirname `readlink -f $0`)/../../lttv/runlttv -m text "
> - LTTV_TRACE_PREFIX=""
> -
> -else
> - echo "$0: No lttv found. Edit \$RUNLTTV to point to your lttv source directory or \$LTTV to you lttv executable." 1>&2
> - exit 1;
> -
> -fi
> -
> -while getopts ":n:N:" options; do
> - case "$options" in
> - n) expected_count=$OPTARG;;
> - N) name=$OPTARG;;
> - h) usage;
> - exit 0;;
> - \?) usage
> - exit 1;;
> - *) usage
> - exit 1;;
> - esac
> -done
> -shift $(($OPTIND - 1))
> -
> -pattern=$1
> -if [ -z "$pattern" ]; then
> - error "no pattern specified"
> - usage
> - exit 1
> -fi
> -
> -if [ -z "$2" ]; then
> - error "no trace directory specified"
> - usage
> - exit 1
> -fi
> -traces=$(find "$2" -mindepth 1 -maxdepth 1 -type d)
> -lttv_trace_cmd=$LTTV_TEXTDUMP_CMD
> -for trace in $traces; do
> - lttv_trace_cmd="$lttv_trace_cmd $LTTV_TRACE_PREFIX $trace"
> -done
> -echo -n "Analyzing trace ($name): "
> -
> -cnt=$($lttv_trace_cmd | grep "$pattern" | wc -l)
> -if [ -z "$expected_count" ]; then
> - if [ "$cnt" -eq "0" ]; then
> - echo "ERROR"
> - echo "Did not find at least one instance of this event ($cnt)"
> - exit 1
> - else
> - echo "Success"
> - exit 0
> - fi
> -else
> - if [ "$cnt" -ne "$expected_count" ]; then
> - echo "ERROR"
> - echo "Expected: $expected_count"
> - echo "In trace: $cnt"
> - exit 1
> - else
> - echo "Success"
> - exit 0
> - fi
> -fi
> diff --git a/tests/utils/Makefile.am b/tests/utils/Makefile.am
> new file mode 100644
> index 0000000..24c0bb8
> --- /dev/null
> +++ b/tests/utils/Makefile.am
> @@ -0,0 +1,3 @@
> +noinst_LIBRARIES = libtap.a
> +libtap_a_SOURCES = tap.c tap.h
> +dist_noinst_SCRIPTS = tap.sh
> diff --git a/tests/utils/tap.c b/tests/utils/tap.c
> new file mode 100644
> index 0000000..8bf72f6
> --- /dev/null
> +++ b/tests/utils/tap.c
> @@ -0,0 +1,433 @@
> +/*-
> + * Copyright (c) 2004 Nik Clayton
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + */
> +
> +#define _GNU_SOURCE
> +#include <ctype.h>
> +#include <stdarg.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +
> +#include "tap.h"
> +
> +static int no_plan = 0;
> +static int skip_all = 0;
> +static int have_plan = 0;
> +static unsigned int test_count = 0; /* Number of tests that have been run */
> +static unsigned int e_tests = 0; /* Expected number of tests to run */
> +static unsigned int failures = 0; /* Number of tests that failed */
> +static char *todo_msg = NULL;
> +static char *todo_msg_fixed = "libtap malloc issue";
> +static int todo = 0;
> +static int test_died = 0;
> +
> +/* Encapsulate the pthread code in a conditional. In the absence of
> + libpthread the code does nothing */
> +#ifdef HAVE_LIBPTHREAD
> +#include <pthread.h>
> +static pthread_mutex_t M = PTHREAD_MUTEX_INITIALIZER;
> +# define LOCK pthread_mutex_lock(&M);
> +# define UNLOCK pthread_mutex_unlock(&M);
> +#else
> +# define LOCK
> +# define UNLOCK
> +#endif
> +
> +static void _expected_tests(unsigned int);
> +static void _tap_init(void);
> +static void _cleanup(void);
> +
> +/*
> + * Generate a test result.
> + *
> + * ok -- boolean, indicates whether or not the test passed.
> + * test_name -- the name of the test, may be NULL
> + * test_comment -- a comment to print afterwards, may be NULL
> + */
> +unsigned int
> +_gen_result(int ok, const char *func, char *file, unsigned int line,
> + char *test_name, ...)
> +{
> + va_list ap;
> + char *local_test_name = NULL;
> + char *c;
> + int name_is_digits;
> +
> + LOCK;
> +
> + test_count++;
> +
> + /* Start by taking the test name and performing any printf()
> + expansions on it */
> + if(test_name != NULL) {
> + va_start(ap, test_name);
> + if (vasprintf(&local_test_name, test_name, ap) == -1) {
> + local_test_name = NULL;
> + }
> + va_end(ap);
> +
> + /* Make sure the test name contains more than digits
> + and spaces. Emit an error message and exit if it
> + does */
> + if(local_test_name) {
> + name_is_digits = 1;
> + for(c = local_test_name; *c != '\0'; c++) {
> + if(!isdigit(*c) && !isspace(*c)) {
> + name_is_digits = 0;
> + break;
> + }
> + }
> +
> + if(name_is_digits) {
> + diag(" You named your test '%s'. You shouldn't use numbers for your test names.", local_test_name);
> + diag(" Very confusing.");
> + }
> + }
> + }
> +
> + if(!ok) {
> + printf("not ");
> + failures++;
> + }
> +
> + printf("ok %d", test_count);
> +
> + if(test_name != NULL) {
> + printf(" - ");
> +
> + /* Print the test name, escaping any '#' characters it
> + might contain */
> + if(local_test_name != NULL) {
> + flockfile(stdout);
> + for(c = local_test_name; *c != '\0'; c++) {
> + if(*c == '#')
> + fputc('\\', stdout);
> + fputc((int)*c, stdout);
> + }
> + funlockfile(stdout);
> + } else { /* vasprintf() failed, use a fixed message */
> + printf("%s", todo_msg_fixed);
> + }
> + }
> +
> + /* If we're in a todo_start() block then flag the test as being
> + TODO. todo_msg should contain the message to print at this
> + point. If it's NULL then asprintf() failed, and we should
> + use the fixed message.
> +
> + This is not counted as a failure, so decrement the counter if
> + the test failed. */
> + if(todo) {
> + printf(" # TODO %s", todo_msg ? todo_msg : todo_msg_fixed);
> + if(!ok)
> + failures--;
> + }
> +
> + printf("\n");
> +
> + if(!ok) {
> + if(getenv("HARNESS_ACTIVE") != NULL)
> + fputs("\n", stderr);
> +
> + diag(" Failed %stest (%s:%s() at line %d)",
> + todo ? "(TODO) " : "", file, func, line);
> + }
> + free(local_test_name);
> +
> + UNLOCK;
> +
> + /* We only care (when testing) that ok is positive, but here we
> + specifically only want to return 1 or 0 */
> + return ok ? 1 : 0;
> +}
> +
> +/*
> + * Initialise the TAP library. Will only do so once, however many times it's
> + * called.
> + */
> +void
> +_tap_init(void)
> +{
> + static int run_once = 0;
> +
> + if(!run_once) {
> + atexit(_cleanup);
> +
> + /* stdout needs to be unbuffered so that the output appears
> + in the same place relative to stderr output as it does
> + with Test::Harness */
> + setbuf(stdout, 0);
> + run_once = 1;
> + }
> +}
> +
> +/*
> + * Note that there's no plan.
> + */
> +int
> +plan_no_plan(void)
> +{
> +
> + LOCK;
> +
> + _tap_init();
> +
> + if(have_plan != 0) {
> + fprintf(stderr, "You tried to plan twice!\n");
> + test_died = 1;
> + UNLOCK;
> + exit(255);
> + }
> +
> + have_plan = 1;
> + no_plan = 1;
> +
> + UNLOCK;
> +
> + return 1;
> +}
> +
> +/*
> + * Note that the plan is to skip all tests
> + */
> +int
> +plan_skip_all(char *reason)
> +{
> +
> + LOCK;
> +
> + _tap_init();
> +
> + skip_all = 1;
> +
> + printf("1..0");
> +
> + if(reason != NULL)
> + printf(" # Skip %s", reason);
> +
> + printf("\n");
> +
> + UNLOCK;
> +
> + exit(0);
> +}
> +
> +/*
> + * Note the number of tests that will be run.
> + */
> +int
> +plan_tests(unsigned int tests)
> +{
> +
> + LOCK;
> +
> + _tap_init();
> +
> + if(have_plan != 0) {
> + fprintf(stderr, "You tried to plan twice!\n");
> + test_died = 1;
> + UNLOCK;
> + exit(255);
> + }
> +
> + if(tests == 0) {
> + fprintf(stderr, "You said to run 0 tests! You've got to run something.\n");
> + test_died = 1;
> + UNLOCK;
> + exit(255);
> + }
> +
> + have_plan = 1;
> +
> + _expected_tests(tests);
> +
> + UNLOCK;
> +
> + return e_tests;
> +}
> +
> +unsigned int
> +diag(char *fmt, ...)
> +{
> + va_list ap;
> +
> + fputs("# ", stderr);
> +
> + va_start(ap, fmt);
> + vfprintf(stderr, fmt, ap);
> + va_end(ap);
> +
> + fputs("\n", stderr);
> +
> + return 0;
> +}
> +
> +void
> +_expected_tests(unsigned int tests)
> +{
> +
> + printf("1..%d\n", tests);
> + e_tests = tests;
> +}
> +
> +int
> +skip(unsigned int n, char *fmt, ...)
> +{
> + va_list ap;
> + char *skip_msg = NULL;
> +
> + LOCK;
> +
> + va_start(ap, fmt);
> + if (asprintf(&skip_msg, fmt, ap) == -1) {
> + skip_msg = NULL;
> + }
> + va_end(ap);
> +
> + while(n-- > 0) {
> + test_count++;
> + printf("ok %d # skip %s\n", test_count,
> + skip_msg != NULL ?
> + skip_msg : "libtap():malloc() failed");
> + }
> +
> + free(skip_msg);
> +
> + UNLOCK;
> +
> + return 1;
> +}
> +
> +void
> +todo_start(char *fmt, ...)
> +{
> + va_list ap;
> +
> + LOCK;
> +
> + va_start(ap, fmt);
> + if (vasprintf(&todo_msg, fmt, ap) == -1) {
> + todo_msg = NULL;
> + }
> + va_end(ap);
> +
> + todo = 1;
> +
> + UNLOCK;
> +}
> +
> +void
> +todo_end(void)
> +{
> +
> + LOCK;
> +
> + todo = 0;
> + free(todo_msg);
> +
> + UNLOCK;
> +}
> +
> +int
> +exit_status(void)
> +{
> + int r;
> +
> + LOCK;
> +
> + /* If there's no plan, just return the number of failures */
> + if(no_plan || !have_plan) {
> + UNLOCK;
> + return failures;
> + }
> +
> + /* Ran too many tests? Return the number of tests that were run
> + that shouldn't have been */
> + if(e_tests < test_count) {
> + r = test_count - e_tests;
> + UNLOCK;
> + return r;
> + }
> +
> + /* Return the number of tests that failed + the number of tests
> + that weren't run */
> + r = failures + e_tests - test_count;
> + UNLOCK;
> +
> + return r;
> +}
> +
> +/*
> + * Cleanup at the end of the run, produce any final output that might be
> + * required.
> + */
> +void
> +_cleanup(void)
> +{
> +
> + LOCK;
> +
> + /* If plan_no_plan() wasn't called, and we don't have a plan,
> + and we're not skipping everything, then something happened
> + before we could produce any output */
> + if(!no_plan && !have_plan && !skip_all) {
> + diag("Looks like your test died before it could output anything.");
> + UNLOCK;
> + return;
> + }
> +
> + if(test_died) {
> + diag("Looks like your test died just after %d.", test_count);
> + UNLOCK;
> + return;
> + }
> +
> +
> + /* No plan provided, but now we know how many tests were run, and can
> + print the header at the end */
> + if(!skip_all && (no_plan || !have_plan)) {
> + printf("1..%d\n", test_count);
> + }
> +
> + if((have_plan && !no_plan) && e_tests < test_count) {
> + diag("Looks like you planned %d %s but ran %d extra.",
> + e_tests, e_tests == 1 ? "test" : "tests", test_count - e_tests);
> + UNLOCK;
> + return;
> + }
> +
> + if((have_plan || !no_plan) && e_tests > test_count) {
> + diag("Looks like you planned %d %s but only ran %d.",
> + e_tests, e_tests == 1 ? "test" : "tests", test_count);
> + UNLOCK;
> + return;
> + }
> +
> + if(failures)
> + diag("Looks like you failed %d %s of %d.",
> + failures, failures == 1 ? "test" : "tests", test_count);
> +
> + UNLOCK;
> +}
> diff --git a/tests/utils/tap.h b/tests/utils/tap.h
> new file mode 100644
> index 0000000..0f05943
> --- /dev/null
> +++ b/tests/utils/tap.h
> @@ -0,0 +1,89 @@
> +/*-
> + * Copyright (c) 2004 Nik Clayton
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + */
> +
> +/* '## __VA_ARGS__' is a gcc'ism. C99 doesn't allow the token pasting
> + and requires the caller to add the final comma if they've ommitted
> + the optional arguments */
> +#ifdef __GNUC__
> +# define ok(e, test, ...) ((e) ? \
> + _gen_result(1, __func__, __FILE__, __LINE__, \
> + test, ## __VA_ARGS__) : \
> + _gen_result(0, __func__, __FILE__, __LINE__, \
> + test, ## __VA_ARGS__))
> +
> +# define ok1(e) ((e) ? \
> + _gen_result(1, __func__, __FILE__, __LINE__, "%s", #e) : \
> + _gen_result(0, __func__, __FILE__, __LINE__, "%s", #e))
> +
> +# define pass(test, ...) ok(1, test, ## __VA_ARGS__);
> +# define fail(test, ...) ok(0, test, ## __VA_ARGS__);
> +
> +# define skip_start(test, n, fmt, ...) \
> + do { \
> + if((test)) { \
> + skip(n, fmt, ## __VA_ARGS__); \
> + continue; \
> + }
> +#elif __STDC_VERSION__ >= 199901L /* __GNUC__ */
> +# define ok(e, ...) ((e) ? \
> + _gen_result(1, __func__, __FILE__, __LINE__, \
> + __VA_ARGS__) : \
> + _gen_result(0, __func__, __FILE__, __LINE__, \
> + __VA_ARGS__))
> +
> +# define ok1(e) ((e) ? \
> + _gen_result(1, __func__, __FILE__, __LINE__, "%s", #e) : \
> + _gen_result(0, __func__, __FILE__, __LINE__, "%s", #e))
> +
> +# define pass(...) ok(1, __VA_ARGS__);
> +# define fail(...) ok(0, __VA_ARGS__);
> +
> +# define skip_start(test, n, ...) \
> + do { \
> + if((test)) { \
> + skip(n, __VA_ARGS__); \
> + continue; \
> + }
> +#else /* __STDC_VERSION__ */
> +# error "Needs gcc or C99 compiler for variadic macros."
> +#endif /* __STDC_VERSION__ */
> +
> +#define skip_end() } while(0);
> +
> +unsigned int _gen_result(int, const char *, char *, unsigned int, char *, ...);
> +
> +int plan_no_plan(void);
> +int plan_skip_all(char *);
> +int plan_tests(unsigned int);
> +
> +unsigned int diag(char *, ...);
> +
> +int skip(unsigned int, char *, ...);
> +
> +void todo_start(char *, ...);
> +void todo_end(void);
> +
> +int exit_status(void);
> diff --git a/tests/utils/tap.sh b/tests/utils/tap.sh
> new file mode 100755
> index 0000000..24ac1aa
> --- /dev/null
> +++ b/tests/utils/tap.sh
> @@ -0,0 +1,456 @@
> +#!/bin/bash
> +#
> +# Copyright 2010 Patrick LeBoutillier <patrick.leboutillier at gmail.com>
> +#
> +# This program is free software: you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation, either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
> +
> +
> +_version='1.01'
> +
> +_plan_set=0
> +_no_plan=0
> +_skip_all=0
> +_test_died=0
> +_expected_tests=0
> +_executed_tests=0
> +_failed_tests=0
> +TODO=
> +
> +
> +usage(){
> + cat <<'USAGE'
> +tap-functions: A TAP-producing BASH library
> +
> +PLAN:
> + plan_no_plan
> + plan_skip_all [REASON]
> + plan_tests NB_TESTS
> +
> +TEST:
> + ok RESULT [NAME]
> + okx COMMAND
> + is RESULT EXPECTED [NAME]
> + isnt RESULT EXPECTED [NAME]
> + like RESULT PATTERN [NAME]
> + unlike RESULT PATTERN [NAME]
> + pass [NAME]
> + fail [NAME]
> +
> +SKIP:
> + skip [CONDITION] [REASON] [NB_TESTS=1]
> +
> + skip $feature_not_present "feature not present" 2 || {
> + is $a "a"
> + is $b "b"
> + }
> +
> +TODO:
> + Specify TODO mode by setting $TODO:
> + TODO="not implemented yet"
> + ok $result "some not implemented test"
> + unset TODO
> +
> +OTHER:
> + diag MSG
> +
> +EXAMPLE:
> + #!/bin/bash
> +
> + . tap-functions
> +
> + plan_tests 7
> +
> + me=$USER
> + is $USER $me "I am myself"
> + like $HOME $me "My home is mine"
> + like "`id`" $me "My id matches myself"
> +
> + /bin/ls $HOME 1>&2
> + ok $? "/bin/ls $HOME"
> + # Same thing using okx shortcut
> + okx /bin/ls $HOME
> +
> + [[ "`id -u`" != "0" ]]
> + i_am_not_root=$?
> + skip $i_am_not_root "Must be root" || {
> + okx ls /root
> + }
> +
> + TODO="figure out how to become root..."
> + okx [ "$HOME" == "/root" ]
> + unset TODO
> +USAGE
> + exit
> +}
> +
> +opt=
> +set_u=
> +while getopts ":sx" opt ; do
> + case $_opt in
> + u) set_u=1 ;;
> + *) usage ;;
> + esac
> +done
> +shift $(( OPTIND - 1 ))
> +# Don't allow uninitialized variables if requested
> +[[ -n "$set_u" ]] && set -u
> +unset opt set_u
> +
> +# Used to call _cleanup on shell exit
> +trap _exit EXIT
> +
> +
> +plan_no_plan(){
> + (( _plan_set != 0 )) && "You tried to plan twice!"
> +
> + _plan_set=1
> + _no_plan=1
> +
> + return 0
> +}
> +
> +
> +plan_skip_all(){
> + local reason=${1:-''}
> +
> + (( _plan_set != 0 )) && _die "You tried to plan twice!"
> +
> + _print_plan 0 "Skip $reason"
> +
> + _skip_all=1
> + _plan_set=1
> + _exit 0
> +
> + return 0
> +}
> +
> +plan_tests(){
> + local tests=${1:?}
> +
> + (( _plan_set != 0 )) && _die "You tried to plan twice!"
> + (( tests == 0 )) && _die "You said to run 0 tests! You've got to run something."
> +
> + _print_plan $tests
> + _expected_tests=$tests
> + _plan_set=1
> +
> + return $tests
> +}
> +
> +
> +_print_plan(){
> + local tests=${1:?}
> + local directive=${2:-''}
> +
> + echo -n "1..$tests"
> + [[ -n "$directive" ]] && echo -n " # $directive"
> + echo
> +}
> +
> +
> +pass(){
> + local name=$1
> + ok 0 "$name"
> +}
> +
> +
> +fail(){
> + local name=$1
> + ok 1 "$name"
> +}
> +
> +# This is the workhorse method that actually
> +# prints the tests result.
> +ok(){
> + local result=${1:?}
> + local name=${2:-''}
> +
> + (( _plan_set == 0 )) && _die "You tried to run a test without a plan! Gotta have a plan."
> +
> + _executed_tests=$(( $_executed_tests + 1 ))
> +
> + if [[ -n "$name" ]] ; then
> + if _matches "$name" "^[0-9]+$" ; then
> + diag " You named your test '$name'. You shouldn't use numbers for your test names."
> + diag " Very confusing."
> + fi
> + fi
> +
> + if (( result != 0 )) ; then
> + echo -n "not "
> + _failed_tests=$(( _failed_tests + 1 ))
> + fi
> + echo -n "ok $_executed_tests"
> +
> + if [[ -n "$name" ]] ; then
> + local ename=${name//\#/\\#}
> + echo -n " - $ename"
> + fi
> +
> + if [[ -n "$TODO" ]] ; then
> + echo -n " # TODO $TODO" ;
> + if (( result != 0 )) ; then
> + _failed_tests=$(( _failed_tests - 1 ))
> + fi
> + fi
> +
> + echo
> + if (( result != 0 )) ; then
> + local file='tap-functions'
> + local func=
> + local line=
> +
> + local i=0
> + local bt=$(caller $i)
> + while _matches "$bt" "tap-functions$" ; do
> + i=$(( $i + 1 ))
> + bt=$(caller $i)
> + done
> + local backtrace=
> + eval $(caller $i | (read line func file ; echo "backtrace=\"$file:$func() at line $line.\""))
> +
> + local t=
> + [[ -n "$TODO" ]] && t="(TODO) "
> +
> + if [[ -n "$name" ]] ; then
> + diag " Failed ${t}test '$name'"
> + diag " in $backtrace"
> + else
> + diag " Failed ${t}test in $backtrace"
> + fi
> + fi
> +
> + return $result
> +}
> +
> +
> +okx(){
> + local command="$@"
> +
> + local line=
> + diag "Output of '$command':"
> + "$@" | while read line ; do
> + diag "$line"
> + done
> + ok ${PIPESTATUS[0]} "$command"
> +}
> +
> +
> +_equals(){
> + local result=${1:?}
> + local expected=${2:?}
> +
> + if [[ "$result" == "$expected" ]] ; then
> + return 0
> + else
> + return 1
> + fi
> +}
> +
> +
> +# Thanks to Aaron Kangas for the patch to allow regexp matching
> +# under bash < 3.
> + _bash_major_version=${BASH_VERSION%%.*}
> +_matches(){
> + local result=${1:?}
> + local pattern=${2:?}
> +
> + if [[ -z "$result" || -z "$pattern" ]] ; then
> + return 1
> + else
> + if (( _bash_major_version >= 3 )) ; then
> + [[ "$result" =~ "$pattern" ]]
> + else
> + echo "$result" | egrep -q "$pattern"
> + fi
> + fi
> +}
> +
> +
> +_is_diag(){
> + local result=${1:?}
> + local expected=${2:?}
> +
> + diag " got: '$result'"
> + diag " expected: '$expected'"
> +}
> +
> +
> +is(){
> + local result=${1:?}
> + local expected=${2:?}
> + local name=${3:-''}
> +
> + _equals "$result" "$expected"
> + (( $? == 0 ))
> + ok $? "$name"
> + local r=$?
> + (( r != 0 )) && _is_diag "$result" "$expected"
> + return $r
> +}
> +
> +
> +isnt(){
> + local result=${1:?}
> + local expected=${2:?}
> + local name=${3:-''}
> +
> + _equals "$result" "$expected"
> + (( $? != 0 ))
> + ok $? "$name"
> + local r=$?
> + (( r != 0 )) && _is_diag "$result" "$expected"
> + return $r
> +}
> +
> +
> +like(){
> + local result=${1:?}
> + local pattern=${2:?}
> + local name=${3:-''}
> +
> + _matches "$result" "$pattern"
> + (( $? == 0 ))
> + ok $? "$name"
> + local r=$?
> + (( r != 0 )) && diag " '$result' doesn't match '$pattern'"
> + return $r
> +}
> +
> +
> +unlike(){
> + local result=${1:?}
> + local pattern=${2:?}
> + local name=${3:-''}
> +
> + _matches "$result" "$pattern"
> + (( $? != 0 ))
> + ok $? "$name"
> + local r=$?
> + (( r != 0 )) && diag " '$result' matches '$pattern'"
> + return $r
> +}
> +
> +
> +skip(){
> + local condition=${1:?}
> + local reason=${2:-''}
> + local n=${3:-1}
> +
> + if (( condition == 0 )) ; then
> + local i=
> + for (( i=0 ; i<$n ; i++ )) ; do
> + _executed_tests=$(( _executed_tests + 1 ))
> + echo "ok $_executed_tests # skip: $reason"
> + done
> + return 0
> + else
> + return
> + fi
> +}
> +
> +
> +diag(){
> + local msg=${1:?}
> +
> + if [[ -n "$msg" ]] ; then
> + echo "# $msg"
> + fi
> +
> + return 1
> +}
> +
> +
> +_die(){
> + local reason=${1:-'<unspecified error>'}
> +
> + echo "$reason" >&2
> + _test_died=1
> + _exit 255
> +}
> +
> +
> +BAIL_OUT(){
> + local reason=${1:-''}
> +
> + echo "Bail out! $reason" >&2
> + _exit 255
> +}
> +
> +
> +_cleanup(){
> + local rc=0
> +
> + if (( _plan_set == 0 )) ; then
> + diag "Looks like your test died before it could output anything."
> + return $rc
> + fi
> +
> + if (( _test_died != 0 )) ; then
> + diag "Looks like your test died just after $_executed_tests."
> + return $rc
> + fi
> +
> + if (( _skip_all == 0 && _no_plan != 0 )) ; then
> + _print_plan $_executed_tests
> + fi
> +
> + local s=
> + if (( _no_plan == 0 && _expected_tests < _executed_tests )) ; then
> + s= ; (( _expected_tests > 1 )) && s=s
> + local extra=$(( _executed_tests - _expected_tests ))
> + diag "Looks like you planned $_expected_tests test$s but ran $extra extra."
> + rc=1 ;
> + fi
> +
> + if (( _no_plan == 0 && _expected_tests > _executed_tests )) ; then
> + s= ; (( _expected_tests > 1 )) && s=s
> + diag "Looks like you planned $_expected_tests test$s but only ran $_executed_tests."
> + fi
> +
> + if (( _failed_tests > 0 )) ; then
> + s= ; (( _failed_tests > 1 )) && s=s
> + diag "Looks like you failed $_failed_tests test$s of $_executed_tests."
> + fi
> +
> + return $rc
> +}
> +
> +
> +_exit_status(){
> + if (( _no_plan != 0 || _plan_set == 0 )) ; then
> + return $_failed_tests
> + fi
> +
> + if (( _expected_tests < _executed_tests )) ; then
> + return $(( _executed_tests - _expected_tests ))
> + fi
> +
> + return $(( _failed_tests + ( _expected_tests - _executed_tests )))
> +}
> +
> +
> +_exit(){
> + local rc=${1:-''}
> + if [[ -z "$rc" ]] ; then
> + _exit_status
> + rc=$?
> + fi
> +
> + _cleanup
> + local alt_rc=$?
> + (( alt_rc != 0 )) && rc=$alt_rc
> + trap - EXIT
> + exit $rc
> +}
> --
> 1.8.3.3
>
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com
More information about the lttng-dev
mailing list