[ltt-dev] ust-0.15: liburcu-cds.so.1 not found
Mathieu Desnoyers
compudj at krystal.dyndns.org
Mon Aug 22 14:05:05 EDT 2011
* Zvi Vered (veredz72 at gmail.com) wrote:
> Hello,
>
> I used the attached build.sh to build rcu, Right after "make install"
> I ran "ldconfig" and started building ust.
>
> But I still get the error: Cannot find liburcu-bp lib. Use
> LDFLAGS=-Ldir to specify its location.
>
> Can you help ?
Have you tried:
LDFLAGS=-L/path_to_ust_libs ./configure
e.g.
LDFLAGS=/usr/local/lib ./configure
?
Mathieu
>
> Thanks,
> Zvika.
>
> On Sat, Aug 20, 2011 at 12:09 PM, Mathieu Desnoyers
> <compudj at krystal.dyndns.org> wrote:
> > * Zvi Vered (veredz72 at gmail.com) wrote:
> >> Hello,
> >>
> >> How should I use ldconfig ?
> >>
> >> Should I run: ldconfig $HOME/GNU/rcu/lib after "make install" of the RCU
> >> and before "configure" of ust ?
> >
> > just "ldconfig" after RCU make install.
> >
> > You might want to do
> >
> > LDFLAGS=-Lpath_to_urcu_libs ./configure
> >
> > to configure ust. I've got that on one of my machines too:
> >
> > configure: error: Cannot find liburcu-bp lib. Use LDFLAGS=-Ldir to
> > specify its location.
> >
> > because liburcu-bp.so was in /usr/local/lib which, for some reason, does
> > not seem to be visible by UST 0.15.
> >
> > Please keep ltt-dev in CC, so other people can learn from the answers,
> > and so that other developers involved in the project will not each take
> > time to reply to the same problem.
> >
> > Thanks,
> >
> > Mathieu
> >
> >>
> >> Thanks,
> >> Zvika.
> >>
> >> ----- Original Message ----- From: "Mathieu Desnoyers"
> >> <compudj at krystal.dyndns.org>
> >> To: "Zvi Vered" <veredz72 at gmail.com>
> >> Sent: Saturday, August 20, 2011 15:19
> >> Subject: Re: [ltt-dev] ust-0.15: liburcu-cds.so.1 not found
> >>
> >>
> >> * Zvi Vered (veredz72 at gmail.com) wrote:
> >>> Hello,
> >>>
> >>> I will soon try the ldconfig solution.
> >>>
> >>> Is it possible to compile UST without userspace RCU ?
> >>
> >> No.
> >>
> >>>
> >>> My target has only one CPU so I think userspace RCU is not mandatory.
> >>
> >> Multiple threads can still be scheduled on that CPU, so you need
> >> protection provided by RCU.
> >>
> >> Thanks,
> >>
> >> Mathieu
> >>
> >>>
> >>> Am I right ?
> >>>
> >>> Thanks,
> >>> Zvika.
> >>>
> >>> ----- Original Message ----- From: "Mathieu Desnoyers"
> >>> <compudj at krystal.dyndns.org>
> >>> To: "Zvi Vered" <veredz72 at gmail.com>
> >>> Cc: <ltt-dev at lists.casi.polymtl.ca>
> >>> Sent: Saturday, August 20, 2011 2:36
> >>> Subject: Re: [ltt-dev] ust-0.15: liburcu-cds.so.1 not found
> >>>
> >>>
> >>>> * Zvi Vered (veredz72 at gmail.com) wrote:
> >>>>> Hello,
> >>>>>
> >>>>> I'm building ust-0.15 with gcc cross compiler I build using
> >>>>> crosstool-ng project.
> >>>>>
> >>>>> I build urcu using this gcc. The ./configure, make, make install
> >>>>> were OK.
> >>>>>
> >>>>> Then I ran ./configure with the right CC,PATH,LD_LIBRARY_PATH (as used
> >>>>> when building urcu) to point to my gcc instead of the default gcc.
> >>>>>
> >>>>> I got the following error:
> >>>>>
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld:
> >>>>> warning: liburcu-cds.so.1, needed by
> >>>>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using -rpath
> >>>>> or -rpath-link)
> >>>>
> >>>> I guess you are using userspace RCU git head ? Try to make clean, make,
> >>>> make install userspace RCU again, and run ldconfig. We're in the process
> >>>> of changing a few inter-lib dependencies within the userspace RCU
> >>>> project.
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Mathieu
> >>>>
> >>>>>
> >>>>> Attached the full config.log
> >>>>>
> >>>>> Can you help ?
> >>>>>
> >>>>> Thanks,
> >>>>> Zvika.
> >>>>
> >>>>> This file contains any messages produced by compilers while
> >>>>> running configure, to aid debugging if configure makes a mistake.
> >>>>>
> >>>>> It was created by ust configure 0.15, which was
> >>>>> generated by GNU Autoconf 2.65. Invocation command line was
> >>>>>
> >>>>> $ ./configure --prefix=/home/zvivered/GNU/ust
> >>>>>
> >>>>> ## --------- ##
> >>>>> ## Platform. ##
> >>>>> ## --------- ##
> >>>>>
> >>>>> hostname = localhost.localdomain
> >>>>> uname -m = i686
> >>>>> uname -r = 2.6.18-238.19.1.el5
> >>>>> uname -s = Linux
> >>>>> uname -v = #1 SMP Fri Jul 15 07:32:29 EDT 2011
> >>>>>
> >>>>> /usr/bin/uname -p = unknown
> >>>>> /bin/uname -X = unknown
> >>>>>
> >>>>> /bin/arch = i686
> >>>>> /usr/bin/arch -k = unknown
> >>>>> /usr/convex/getsysinfo = unknown
> >>>>> /usr/bin/hostinfo = unknown
> >>>>> /bin/machine = unknown
> >>>>> /usr/bin/oslevel = unknown
> >>>>> /bin/universe = unknown
> >>>>>
> >>>>> PATH: /usr/lib/qt-3.3/bin
> >>>>> PATH: /usr/kerberos/bin
> >>>>> PATH: /usr/local/bin
> >>>>> PATH: /usr/bin
> >>>>> PATH: /bin
> >>>>> PATH: /usr/X11R6/bin
> >>>>> PATH: /home/zvivered/bin
> >>>>> PATH:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/libexec/gcc/i686-nptl-linux-gnu/4.3.2
> >>>>> PATH:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/libexec/gcc/i686-nptl-linux-gnu/4.3.2
> >>>>>
> >>>>>
> >>>>> ## ----------- ##
> >>>>> ## Core tests. ##
> >>>>> ## ----------- ##
> >>>>>
> >>>>> configure:2343: checking build system type
> >>>>> configure:2357: result: i686-pc-linux-gnu
> >>>>> configure:2377: checking host system type
> >>>>> configure:2390: result: i686-pc-linux-gnu
> >>>>> configure:2410: checking target system type
> >>>>> configure:2423: result: i686-pc-linux-gnu
> >>>>> configure:2467: checking for a BSD-compatible install
> >>>>> configure:2535: result: /usr/bin/install -c
> >>>>> configure:2546: checking whether build environment is sane
> >>>>> configure:2596: result: yes
> >>>>> configure:2737: checking for a thread-safe mkdir -p
> >>>>> configure:2776: result: /bin/mkdir -p
> >>>>> configure:2789: checking for gawk
> >>>>> configure:2805: found /usr/bin/gawk
> >>>>> configure:2816: result: gawk
> >>>>> configure:2827: checking whether make sets $(MAKE)
> >>>>> configure:2849: result: yes
> >>>>> configure:3013: checking for gcc
> >>>>> configure:3040: result:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>>>> configure:3269: checking for C compiler version
> >>>>> configure:3278:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>>>> --version >&5
> >>>>> .i686-nptl-linux-gnu-gcc (crosstool-NG-1.5.0) 4.3.2
> >>>>> Copyright (C) 2008 Free Software Foundation, Inc.
> >>>>> This is free software; see the source for copying conditions. There
> >>>>> is NO
> >>>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
> >>>>> PURPOSE.
> >>>>>
> >>>>> configure:3289: $? = 0
> >>>>> configure:3278:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>>>> -v >&5
> >>>>> Using built-in specs.
> >>>>> Target: i686-nptl-linux-gnu
> >>>>> Configured with:
> >>>>> /home/zvivered/GNU/crosstool-1.5.0/working/src/gcc-4.3.2/configure
> >>>>> --build=i386-build_redhat-linux-gnu
> >>>>> --host=i386-build_redhat-linux-gnu --target=i686-nptl-linux-gnu
> >>>>> --prefix=/home/zvivered/GNU/crosstool-1.5.0/release
> >>>>> --with-sysroot=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu//sys-root
> >>>>> --enable-languages=c --disable-multilib --with-arch=i686
> >>>>> --with-pkgversion=crosstool-NG-1.5.0 --enable-__cxa_atexit
> >>>>> --with-gmp=/home/zvivered/GNU/crosstool-1.5.0/release
> >>>>> --with-mpfr=/home/zvivered/GNU/crosstool-1.5.0/release
> >>>>> --with-local-prefix=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu//sys-root
> >>>>> --disable-nls --enable-threads=posix --enable-symvers=gnu
> >>>>> --enable-c99 --enable-long-long --enable-target-optspace>> Thread
> >>>>> model: posix>> gcc version 4.3.2 (crosstool-NG-1.5.0)>>
> >>>>> configure:3289: $? = 0>>
> >>>>> configure:3278:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>>>> -V>&5>> .i686-nptl-linux-gnu-gcc: '-V' option must have argument>>
> >>>>> configure:3289: $? = 1>>
> >>>>> configure:3278:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>>>> -qversion >&5>> .i686-nptl-linux-gnu-gcc: unrecognized option
> >>>>> '-qversion'>> .i686-nptl-linux-gnu-gcc: no input
> >>> files>> configure:3289: $? = 1>> configure:3309: checking whether the C
> >>> compiler works>>
> >>> configure:3331:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib
> >>> conftest.c >&5>> configure:3335: $? = 0>> configure:3384: result:
> >>> yes>> configure:3387: checking for C compiler default output file
> >>> name>> configure:3389: result: a.out>> configure:3395: checking for
> >>> suffix of executables>>
> >>> configure:3402:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:3406: $? = 0>>
> >>> configure:3428: result:>> configure:3450: checking whether we are cross
> >>> compiling>>
> >>> configure:3458:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:3462: $? = 0>>
> >>> configure:3469: ./conftest>> con
> >>> figure:3473: $? = 0>> configure:3488: result: no>> configure:3493:
> >>> checking for suffix of object files>>
> >>> configure:3515:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3519:
> >>> $? = 0>> configure:3540: result: o>> configure:3544: checking whether
> >>> we are using the GNU C compiler>>
> >>> configure:3563:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3563:
> >>> $? = 0>> configure:3572: result: yes>> configure:3581: checking
> >>> whether/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccaccepts
> >>> -g>>
> >>> configure:3601:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -gconftest.c >&5>> configure:3601: $? = 0>> configure:3642: result:
> >>> yes>> configure:3659: checking
> >>> for/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccoption
> >>> to accept ISO C89>> configure:3723:/home/zvi
> >>> vered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c
> >>> -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3723: $? =
> >>> 0>> configure:3736: result: none needed>> configure:3767: checking for
> >>> style of include used by make>> configure:3795: result: GNU>>
> >>> configure:3820: checking dependency style
> >>> of/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
> >>> configure:3930: result: gcc3>> configure:3945: checking whether make
> >>> sets $(MAKE)>> configure:3967: result: yes>> configure:4001: checking
> >>> for a sed that does not truncate output>> configure:4065: result:
> >>> /bin/sed>> configure:4083: checking for grep that handles long lines
> >>> and -e>> configure:4141: result: /bin/grep>> configure:4146: checking
> >>> for egrep>> configure:4208: result: /bin/grep -E>> configure:4213:
> >>> checking for fgrep>> configure:4275: result: /bin/grep -F>>
> >>> configure:4310: checking for ld used
> >>> by/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
> >>> configure:4377: r
> >
> >>> esult:/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld>>
> >>> configure:4384: checking if the
> >>> linker(/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld)
> >>> isGNU ld>> configure:4399: result: yes>> configure:4411: checking for
> >>> BSD- or MS-compatible name lister (nm)>> configure:4460: result:
> >>> /usr/bin/nm -B>> configure:4578: checking the name lister (/usr/bin/nm
> >>> -B) interface>>
> >>> configure:4585:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:4588:
> >>> /usr/bin/nm -B "conftest.o">> configure:4591: output>> 00000000 B
> >>> some_variable>> configure:4598: result: BSD nm>> configure:4601:
> >>> checking whether ln -s works>> configure:4605: result: yes>>
> >>> configure:4613: checking the maximum length of command line arguments>>
> >>> configure:4733: result: 98304>> configure:4750: checking whether the
> >>> shell understands some XSIconstructs>> configure:4760: result: yes>>
> >>> configure:4764: chec
> >>> king whether the shell understands "+=">> configure:4770: result: yes>>
> >>> configure:4805: checking
> >>> for/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld
> >>> optionto reload object files>> configure:4812: result: -r>>
> >>> configure:4881: checking for objdump>> configure:4897: found
> >>> /usr/bin/objdump>> configure:4908: result: objdump>> configure:4940:
> >>> checking how to recognize dependent libraries>> configure:5136: result:
> >>> pass_all>> configure:5196: checking for ar>> configure:5212: found
> >>> /usr/bin/ar>> configure:5223: result: ar>> configure:5301: checking for
> >>> strip>> configure:5317: found /usr/bin/strip>> configure:5328: result:
> >>> strip>> configure:5400: checking for ranlib>> configure:5416: found
> >>> /usr/bin/ranlib>> configure:5427: result: ranlib>> configure:5517:
> >>> checking command to parse /usr/bin/nm -B output
> >>> from/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccobject>>
> >>>
> >>> configure:5635:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
> >>> -gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
> >>> configure:5638: $? = 0>> configure:5642: /usr/bin/nm -B conftest.o \| sed
> >>> -n -e's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
> >>> ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1\2 \2/p' \> conftest.nm>> configure:5645:
> >>> $? = 0>>
> >>> configure:5699:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c conftstm.o >&5>> configure:5702:
> >>> $? = 0>> configure:5740: result: ok>> configure:6549: checking how to run
> >>> the C preprocessor>> configure:6619:
> >>> result:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp>>
> >>> configure:6639:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cppconftest.c>>
> >>> configure:6639: $? = 0>>
> >>> configure:6653:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cppconftest.c>>
> >>> conftest.c:13:28: error: ac_nonexistent.h: No such file or directory>>
> >>> configure:6653: $? = 1>> configure: failed program was:>> | /* confdefs.h
> >>> */>> | #define PACKAGE_NAME "ust">> | #define PACKAGE_TARNAME "ust">> |
> >>> #define PACKAGE_VERSION "0.15">> | #define PACKAGE_STRING "ust 0.15">> |
> >>> #define PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com">> |
> >>> #define PACKAGE_URL "">> | #define PACKAGE "ust">> | #define VERSION
> >>> "0.15">> | #define VERSION_MAJOR 0>> | #define VERSION_MINOR 15>> | /*
> >>> end confdefs.h. */>> | #include <ac_nonexistent.h>>> configure:6682:
> >>> checking for ANSI C header files>>
> >>> configure:6702:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6702: $?
> >>> = 0>>
> >>> configure:6775:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:6775: $? = 0>>
> >>> configure:6775: ./conftest>> configure:6775: $? = 0>> configure:6786:
> >>> result: yes>> configure:6799: checking for sys/
> >>> types.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> sys/stat.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> stdlib.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> string.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> memory.h>> configure:6799:/home/zvivered/GNU
> >>> /crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c
> >>> -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799: $? =
> >>> 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> strings.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> inttypes.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> stdint.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
> >>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
> >>> unistd.h>>
> >>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-lin
> >>> ux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
> >>> configure:6799: $? = 0>> configure:6799: result: yes>> configure:6814:
> >>> checking for dlfcn.h>>
> >>> configure:6814:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6814:
> >>> $? = 0>> configure:6814: result: yes>> configure:6998: checking for
> >>> objdir>> configure:7013: result: .libs>> configure:7309: checking
> >>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccsupports
> >>> -fno-rtti -fno-exceptions>>
> >>> configure:7327:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include -fno-rtti -fno-exceptions
> >>> conftest.c >&5>> cc1: warning: command line option "-fno-rtti" is valid
> >>> for C++/ObjC++ butnot for C>> configure:7331: $? = 0>> configure:7344:
> >>> result: no>> configure:7364: checking
> >>> for/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccoption
> >>> to produce PIC>> c
> >>> onfigure:7636: result: -fPIC -DPIC>> configure:7648: checking
> >>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> PICflag -fPIC -DPIC works>>
> >>> configure:7666:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include -fPIC -DPIC -DPIC conftest.c >&5>>
> >>> configure:7670: $? = 0>> configure:7683: result: yes>> configure:7707:
> >>> checking
> >>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccstatic
> >>> flag -static works>> configure:7735: result: yes>> configure:7750:
> >>> checking
> >>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccsupports
> >>> -c -o file.o>>
> >>> configure:7771:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include -o out/conftest2.o conftest.c >&5>>
> >>> configure:7775: $? = 0>> configure:7797: result: yes>> configure:7805:
> >>> checking
> >>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gccsupports
> >>> -c -o file.o>> configure:7852: result: yes>> configure:7885: checking
> >>> whether
> >>> the/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcclinker(/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld)supports
> >>> shared libraries>> configure:8876: result: yes>> configure:8913: checking
> >>> whether -lc should be explicitly linked in>>
> >>> configure:8918:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:8921: $?
> >>> = 0>>
> >>> configure:8936:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1
> >>> \|bin/grep -lc \>/dev/null 2\>\&1>> configure:8939: $? = 0>>
> >>> configure:8951: result: no>> configure:9115: checking dynamic linker
> >>> characteristics>>
> >>> configure:9548:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/lib -Wl,-rpath -Wl,/f
> >>> oo conftest.c >&5>> configure:9548: $? = 0>> configure:9778: result:
> >>> GNU/Linux ld.so>> configure:9880: checking how to hardcode library
> >>> paths into programs>> configure:9905: result: immediate>>
> >>> configure:10425: checking whether stripping libraries is possible>>
> >>> configure:10430: result: yes>> configure:10465: checking if libtool
> >>> supports shared libraries>> configure:10467: result: yes>>
> >>> configure:10470: checking whether to build shared libraries>>
> >>> configure:10491: result: yes>> configure:10494: checking whether to
> >>> build static libraries>> configure:10498: result: yes>>
> >>> configure:10552: checking for inline>>
> >>> configure:10568:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
> >>> configure:10568: $? = 0>> configure:10576: result: inline>>
> >>> configure:10610: checking for stdlib.h>> configure:10610: result: yes>>
> >>> configure:10620: checking for GNU libc compatible malloc>>
> >>> configure:10644:/home/zvivered/GNU/crosst
> >>> ool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -oconftest
> >>> -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10644: $? =
> >>> 0>> configure:10644: ./conftest>> configure:10644: $? = 0>>
> >>> configure:10654: result: yes>> configure:10678: checking for
> >>> gettimeofday>>
> >>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
> >>> 0>> configure:10678: result: yes>> configure:10678: checking for
> >>> munmap>>
> >>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
> >>> 0>> configure:10678: result: yes>> configure:10678: checking for
> >>> socket>>
> >>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include -L/home
> >>> /zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? = 0>>
> >>> configure:10678: result: yes>> configure:10678: checking for strerror>>
> >>>
> >>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
> >>> 0>> configure:10678: result: yes>> configure:10678: checking for
> >>> strtol>>
> >>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
> >>> 0>> configure:10678: result: yes>> configure:10696: checking urcu-bp.h
> >>> usability>>
> >>> configure:10696:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -c -Wall -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
> >>> configure:10696: $? = 0>> configure:10696: result: yes>>
> >>> configure:10696: checking urcu-bp.h presence>>
> >>> configure:10696:/home/zvivered/GNU/cro
> >>> sstool-1.5.0/release/bin/i686-nptl-linux-gnu-cppconftest.c>>
> >>> conftest.c:32:21: error: urcu-bp.h: No such file or directory>>
> >>> configure:10696: $? = 1>> configure: failed program was:>> | /*
> >>> confdefs.h */>> | #define PACKAGE_NAME "ust">> | #define
> >>> PACKAGE_TARNAME "ust">> | #define PACKAGE_VERSION "0.15">> | #define
> >>> PACKAGE_STRING "ust 0.15">> | #define PACKAGE_BUGREPORT "mathieu dot
> >>> desnoyers at efficios dot com">> | #define PACKAGE_URL "">> | #define
> >>> PACKAGE "ust">> | #define VERSION "0.15">> | #define VERSION_MAJOR 0>>
> >>> | #define VERSION_MINOR 15>> | #define STDC_HEADERS 1>> | #define
> >>> HAVE_SYS_TYPES_H 1>> | #define HAVE_SYS_STAT_H 1>> | #define
> >>> HAVE_STDLIB_H 1>> | #define HAVE_STRING_H 1>> | #define HAVE_MEMORY_H
> >>> 1>> | #define HAVE_STRINGS_H 1>> | #define HAVE_INTTYPES_H 1>> |
> >>> #define HAVE_STDINT_H 1>> | #define HAVE_UNISTD_H 1>> | #define
> >>> HAVE_DLFCN_H 1>> | #define LT_OBJDIR ".libs/">> | #define
> >>> HAVE_STDLIB_H 1>> | #define HAVE_MALLOC 1>> | #define HAVE_GETTIMEOFDAY
> >>> 1>> | #d
> >>> efine HAVE_MUNMAP 1>> | #define HAVE_SOCKET 1>> | #define HAVE_STRERROR
> >>> 1>> | #define HAVE_STRTOL 1>> | /* end confdefs.h. */>> | #include
> >>> <urcu-bp.h>>> configure:10696: result: no>> configure:10696: WARNING:
> >>> urcu-bp.h: accepted by the compiler, rejectedby the preprocessor!>>
> >>> configure:10696: WARNING: urcu-bp.h: proceeding with the
> >>> compiler'sresult>> configure:10696: checking for urcu-bp.h>>
> >>> configure:10696: result: yes>> configure:10711: checking for
> >>> synchronize_rcu_bp in -lurcu-bp>>
> >>> configure:10736:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> >>> -oconftest -Wall -I/home/zvivered/GNU/urcu/include
> >>> -L/home/zvivered/GNU/urcu/lib conftest.c -lurcu-bp
> >>> >&5>>/home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld:
> >>> warning: liburcu-cds.so.1, neededby
> >>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using
> >>> -rpathor -rpath-link)>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so:
> >>> undefined referen
> >>> ce to`cds_wfq_enqueue'>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so:
> >>> undefined reference to`cds_wfq_init'>>
> >>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so: undefined reference
> >>> to`cds_wfq_node_init'>> collect2: ld returned 1 exit status>>
> >>> configure:10736: $? = 1>> configure: failed program was:>> | /*
> >>> confdefs.h */>> | #define PACKAGE_NAME "ust">> | #define
> >>> PACKAGE_TARNAME "ust">> | #define PACKAGE_VERSION "0.15">> | #define
> >>> PACKAGE_STRING "ust 0.15">> | #define PACKAGE_BUGREPORT "mathieu dot
> >>> desnoyers at efficios dot com">> | #define PACKAGE_URL "">> | #define
> >>> PACKAGE "ust">> | #define VERSION "0.15">> | #define VERSION_MAJOR 0>>
> >>> | #define VERSION_MINOR 15>> | #define STDC_HEADERS 1>> | #define
> >>> HAVE_SYS_TYPES_H 1>> | #define HAVE_SYS_STAT_H 1>> | #define
> >>> HAVE_STDLIB_H 1>> | #define HAVE_STRING_H 1>> | #define HAVE_MEMORY_H
> >>> 1>> | #define HAVE_STRINGS_H 1>> | #define HAVE_INTTYPES_H 1>> |
> >>> #define HAVE_STDINT_H 1>> | #define HAVE_UNISTD_H 1>> | #define
> >>> HAVE_DLFCN_H 1>> | #define LT_O
> >>> BJDIR ".libs/">> | #define HAVE_STDLIB_H 1>> | #define HAVE_MALLOC 1>>
> >>> | #define HAVE_GETTIMEOFDAY 1>> | #define HAVE_MUNMAP 1>> | #define
> >>> HAVE_SOCKET 1>> | #define HAVE_STRERROR 1>> | #define HAVE_STRTOL 1>> |
> >>> #define HAVE_URCU_BP_H 1>> | /* end confdefs.h. */>> |>> | /* Override
> >>> any GCC internal prototype to avoid an error.>> | Use char because
> >>> int might match the return type of a GCC>> | builtin and then its
> >>> argument prototype would still apply. */>> | #ifdef __cplusplus>> |
> >>> extern "C">> | #endif>> | char synchronize_rcu_bp ();>> | int>> | main
> >>> ()>> | {>> | return synchronize_rcu_bp ();>> | ;>> | return 0;>> |
> >>> }>> configure:10745: result: no>> configure:10755: error: Cannot find
> >>> liburcu-bp lib. Use LDFLAGS=-Ldir tospecify its location.>>>> ##
> >>> ---------------- ##>> ## Cache variables. ##>> ## ----------------
> >>> ##>>>> ac_cv_build=i686-pc-linux-gnu>> ac_cv_c_compiler_gnu=yes>>
> >>> ac_cv_c_inline=inline>>
> >>> ac_cv_env_CC_set=set>>ac_cv_env_CC_value=/home/zvivered/GNU/cros
> >>> stool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
> >>> ac_cv_env_CFLAGS_set=set>>
> >>> ac_cv_env_CFLAGS_value=-I/home/zvivered/GNU/urcu/include>>
> >>> ac_cv_env_CPPFLAGS_set=>> ac_cv_env_CPPFLAGS_value=>>
> >>> ac_cv_env_CPP_set=set>>ac_cv_env_CPP_value=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp>>
> >>> ac_cv_env_LDFLAGS_set=set>>
> >>> ac_cv_env_LDFLAGS_value=-L/home/zvivered/GNU/urcu/lib>>
> >>> ac_cv_env_LIBS_set=>> ac_cv_env_LIBS_value=>>
> >>> ac_cv_env_build_alias_set=>> ac_cv_env_build_alias_value=>>
> >>> ac_cv_env_host_alias_set=>> ac_cv_env_host_alias_value=>>
> >>> ac_cv_env_target_alias_set=>> ac_cv_env_target_alias_value=>>
> >>> ac_cv_func_gettimeofday=yes>> ac_cv_func_malloc_0_nonnull=yes>>
> >>> ac_cv_func_munmap=yes>> ac_cv_func_socket=yes>>
> >>> ac_cv_func_strerror=yes>> ac_cv_func_strtol=yes>>
> >>> ac_cv_header_dlfcn_h=yes>> ac_cv_header_inttypes_h=yes>>
> >>> ac_cv_header_memory_h=yes>> ac_cv_header_stdc=yes>>
> >>> ac_cv_header_stdint_h=yes>> ac_cv_header_stdlib_h=yes>>
> >>> ac_cv_header_string_h=yes>> ac_cv_header_strin
> >>> gs_h=yes>> ac_cv_header_sys_stat_h=yes>> ac_cv_header_sys_types_h=yes>>
> >>> ac_cv_header_unistd_h=yes>> ac_cv_header_urcu_bp_h=yes>>
> >>> ac_cv_host=i686-pc-linux-gnu>>
> >>> ac_cv_lib_urcu_bp_synchronize_rcu_bp=no>> ac_cv_objext=o>>
> >>> ac_cv_path_EGREP='/bin/grep -E'>> ac_cv_path_FGREP='/bin/grep -F'>>
> >>> ac_cv_path_GREP=/bin/grep>> ac_cv_path_SED=/bin/sed>>
> >>> ac_cv_path_install='/usr/bin/install -c'>>
> >>> ac_cv_path_mkdir=/bin/mkdir>>
> >>> ac_cv_prog_AWK=gawk>>ac_cv_prog_CPP=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp>>
> >>>
> >>> ac_cv_prog_ac_ct_AR=ar>>ac_cv_prog_ac_ct_CC=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
> >>> ac_cv_prog_ac_ct_OBJDUMP=objdump>> ac_cv_prog_ac_ct_RANLIB=ranlib>>
> >>> ac_cv_prog_ac_ct_STRIP=strip>> ac_cv_prog_cc_c89=>>
> >>> ac_cv_prog_cc_g=yes>> ac_cv_prog_make_make_set=yes>>
> >>> ac_cv_target=i686-pc-linux-gnu>>
> >>> am_cv_CC_dependencies_compiler_type=gcc3>>
> >>> lt_cv_deplibs_check_method=pass_all>>
> >>> lt_cv_file_magic_cmd='$MAGIC_CMD'>> lt_cv_file_magic_test_file
> >>> =>> lt_cv_ld_reload_flag=-r>> lt_cv_nm_interface='BSD nm'>>
> >>> lt_cv_objdir=.libs>>lt_cv_path_LD=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld>>
> >>> lt_cv_path_NM='/usr/bin/nm -B'>> lt_cv_prog_compiler_c_o=yes>>
> >>> lt_cv_prog_compiler_pic_works=yes>>
> >>> lt_cv_prog_compiler_rtti_exceptions=no>>
> >>> lt_cv_prog_compiler_static_works=yes>> lt_cv_prog_gnu_ld=yes>>
> >>> lt_cv_sys_global_symbol_pipe='sed -n -e'\''s/^.*[
> >>> ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
> >>> \2/p'\'''>> lt_cv_sys_global_symbol_to_c_name_address='sed -n -e
> >>> '\''s/^: \([^ ]*\)$/ {\"\1\", (void *) 0},/p'\'' -e
> >>> '\''s/^[ABCDGIRSTW]* \([^ ]*\)\([^ ]*\)$/ {"\2", (void *)
> >>> \&\2},/p'\'''>>
> >>> lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e
> >>> '\''s/^:\([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e
> >>> '\''s/^[ABCDGIRSTW]* \([^ ]*\)\(lib[^ ]*\)$/ {"\2", (void *)
> >>> \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]*\([^ ]*\) \([^ ]*\)$/ {"lib\2",
> >>> (void *) \&\2},/p'\'''>> lt_cv_sys_global_symbol_to_cdecl=
> >>> 'sed -n -e '\''s/^T .* \(.*\)$/externint \1();/p'\'' -e
> >>> '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''>>
> >>> lt_cv_sys_max_cmd_len=98304>>>> ## ----------------- ##>> ## Output
> >>> variables. ##>> ## ----------------- ##>>>> ACLOCAL='${SHELL}
> >>> /home/zvivered/GNU/ust-0.15/config/missing --runaclocal-1.11'>>
> >>> AMDEPBACKSLASH='\'>> AMDEP_FALSE='#'>> AMDEP_TRUE=''>> AMTAR='${SHELL}
> >>> /home/zvivered/GNU/ust-0.15/config/missing --run tar'>>
> >>> AM_BACKSLASH='\'>> AM_DEFAULT_VERBOSITY='0'>> AR='ar'>>
> >>> AUTOCONF='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing
> >>> --runautoconf'>> AUTOHEADER='${SHELL}
> >>> /home/zvivered/GNU/ust-0.15/config/missing --runautoheader'>>
> >>> AUTOMAKE='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing
> >>> --runautomake-1.11'>>
> >>> AWK='gawk'>>CC='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc'>>
> >>> CCDEPMODE='depmode=gcc3'>> CFLAGS='-Wall
> >>> -I/home/zvivered/GNU/urcu/include'>>CPP='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp'>>
> >>> CPPFLAG
> >>> S=''>> CYGPATH_W='echo'>> DEFS=''>> DEPDIR='.deps'>> DSYMUTIL=''>>
> >>> DUMPBIN=''>> ECHO_C=''>> ECHO_N='-n'>> ECHO_T=''>> EGREP='/bin/grep
> >>> -E'>> EXEEXT=''>> FGREP='/bin/grep -F'>> GREP='/bin/grep'>>
> >>> INSTALL_DATA='${INSTALL} -m 644'>> INSTALL_PROGRAM='${INSTALL}'>>
> >>> INSTALL_SCRIPT='${INSTALL}'>> INSTALL_STRIP_PROGRAM='$(install_sh) -c
> >>> -s'>>LD='/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld'>>
> >>> LDFLAGS='-L/home/zvivered/GNU/urcu/lib'>> LIBFORMAT=''>> LIBOBJS=''>>
> >>> LIBS=''>> LIBTOOL='$(SHELL) $(top_builddir)/libtool'>> LIPO=''>>
> >>> LN_S='ln -s'>> LTLIBOBJS=''>> MAJOR_VERSION='0'>> MAKEINFO='${SHELL}
> >>> /home/zvivered/GNU/ust-0.15/config/missing --runmakeinfo'>>
> >>> MINOR_VERSION='15'>> MKDIR_P='/bin/mkdir -p'>> NM='/usr/bin/nm -B'>>
> >>> NMEDIT=''>> OBJDUMP='objdump'>> OBJEXT='o'>> OTOOL64=''>> OTOOL=''>>
> >>> PACKAGE='ust'>> PACKAGE_BUGREPORT='mathieu dot desnoyers at efficios
> >>> dot com'>> PACKAGE_NAME='ust'>> PACKAGE_STRING='ust 0.15'>>
> >>> PACKAGE_TARNAME='ust'>> PACKAGE_URL=''>> PACK
> >>> AGE_VERSION='0.15'>> PATH_SEPARATOR=':'>> RANLIB='ranlib'>>
> >>> SED='/bin/sed'>> SET_MAKE=''>> SHELL='/bin/sh'>> STRIP='strip'>>
> >>> VERSION='0.15'>>ac_ct_CC='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc'>>
> >>> ac_ct_DUMPBIN=''>> am__EXEEXT_FALSE=''>> am__EXEEXT_TRUE=''>>
> >>> am__fastdepCC_FALSE='#'>> am__fastdepCC_TRUE=''>>
> >>> am__include='include'>> am__isrc=''>> am__leading_dot='.'>>
> >>> am__quote=''>> am__tar='${AMTAR} chof - "$$tardir"'>>
> >>> am__untar='${AMTAR} xf -'>> bindir='${exec_prefix}/bin'>>
> >>> build='i686-pc-linux-gnu'>> build_alias=''>> build_cpu='i686'>>
> >>> build_os='linux-gnu'>> build_vendor='pc'>> datadir='${datarootdir}'>>
> >>> datarootdir='${prefix}/share'>>
> >>> docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'>> dvidir='${docdir}'>>
> >>> exec_prefix='NONE'>> host='i686-pc-linux-gnu'>> host_alias=''>>
> >>> host_cpu='i686'>> host_os='linux-gnu'>> host_vendor='pc'>>
> >>> htmldir='${docdir}'>> includedir='${prefix}/include'>>
> >>> infodir='${datarootdir}/info'>> install_sh='${SHELL} /home/zvivere
> >>> d/GNU/ust-0.15/config/install-sh'>> libdir='${exec_prefix}/lib'>>
> >>> libexecdir='${exec_prefix}/libexec'>>
> >>> localedir='${datarootdir}/locale'>> localstatedir='${prefix}/var'>>
> >>> lt_ECHO='echo'>> mandir='${datarootdir}/man'>> mkdir_p='/bin/mkdir
> >>> -p'>> oldincludedir='/usr/include'>> pdfdir='${docdir}'>>
> >>> prefix='/home/zvivered/GNU/ust'>> program_transform_name='s,x,x,'>>
> >>> psdir='${docdir}'>> sbindir='${exec_prefix}/sbin'>>
> >>> sharedstatedir='${prefix}/com'>> sysconfdir='${prefix}/etc'>>
> >>> target='i686-pc-linux-gnu'>> target_alias=''>> target_cpu='i686'>>
> >>> target_os='linux-gnu'>> target_vendor='pc'>>>> ## ----------- ##>> ##
> >>> confdefs.h. ##>> ## ----------- ##>>>> /* confdefs.h */>> #define
> >>> PACKAGE_NAME "ust">> #define PACKAGE_TARNAME "ust">> #define
> >>> PACKAGE_VERSION "0.15">> #define PACKAGE_STRING "ust 0.15">> #define
> >>> PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com">> #define
> >>> PACKAGE_URL "">> #define PACKAGE "ust">> #define VERSION "0.15">>
> >>> #define VERSION_MAJOR 0>> #define VERSI
> >>> ON_MINOR 15>> #define STDC_HEADERS 1>> #define HAVE_SYS_TYPES_H 1>>
> >>> #define HAVE_SYS_STAT_H 1>> #define HAVE_STDLIB_H 1>> #define
> >>> HAVE_STRING_H 1>> #define HAVE_MEMORY_H 1>> #define HAVE_STRINGS_H 1>>
> >>> #define HAVE_INTTYPES_H 1>> #define HAVE_STDINT_H 1>> #define
> >>> HAVE_UNISTD_H 1>> #define HAVE_DLFCN_H 1>> #define LT_OBJDIR ".libs/">>
> >>> #define HAVE_STDLIB_H 1>> #define HAVE_MALLOC 1>> #define
> >>> HAVE_GETTIMEOFDAY 1>> #define HAVE_MUNMAP 1>> #define HAVE_SOCKET 1>>
> >>> #define HAVE_STRERROR 1>> #define HAVE_STRTOL 1>> #define
> >>> HAVE_URCU_BP_H 1>>>> configure: exit 1>>>
> >>> _______________________________________________>> ltt-dev mailing
> >>> list>> ltt-dev at lists.casi.polymtl.ca>>
> >>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev>>> -->
> >>> Mathieu Desnoyers> Operating System Efficiency R&D Consultant> EfficiOS
> >>> Inc.> http://www.efficios.com
> >>>
> >>
> >> --
> >> Mathieu Desnoyers
> >> Operating System Efficiency R&D Consultant
> >> EfficiOS Inc.
> >> http://www.efficios.com
> >>
> >
> > --
> > Mathieu Desnoyers
> > Operating System Efficiency R&D Consultant
> > EfficiOS Inc.
> > http://www.efficios.com
> >
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
More information about the lttng-dev
mailing list