[ltt-dev] ust-0.15: liburcu-cds.so.1 not found
Irina Guilman
irina.guilman at ericsson.com
Sun Aug 21 23:10:00 EDT 2011
Zvi,
At which step do you get "Cannot find liburcu-bp lib. Use LDFLAGS=-Ldir to specify its location."?
This is what I have for LDFLAGS in my shell:
setenv LDFLAGS "-Wl,-rpath,${INSTALL_DIR}/lib -I${INSTALL_DIR}/lib"
INSTALL_DIR is because I chose an install directory in the configurestep and don't do ldconfig
-----Original Message-----
From: Zvi Vered [mailto:veredz72 at gmail.com]
Sent: August-21-11 10:56 PM
To: Mathieu Desnoyers
Cc: ltt-dev at lists.casi.polymtl.ca
Subject: Re: [ltt-dev] ust-0.15: liburcu-cds.so.1 not found
Hello,
I used the attached build.sh to build rcu, Right after "make install"
I ran "ldconfig" and started building ust.
But I still get the error: Cannot find liburcu-bp lib. Use LDFLAGS=-Ldir to specify its location.
Can you help ?
Thanks,
Zvika.
On Sat, Aug 20, 2011 at 12:09 PM, Mathieu Desnoyers <compudj at krystal.dyndns.org> wrote:
> * Zvi Vered (veredz72 at gmail.com) wrote:
>> Hello,
>>
>> How should I use ldconfig ?
>>
>> Should I run: ldconfig $HOME/GNU/rcu/lib after "make install" of the
>> RCU and before "configure" of ust ?
>
> just "ldconfig" after RCU make install.
>
> You might want to do
>
> LDFLAGS=-Lpath_to_urcu_libs ./configure
>
> to configure ust. I've got that on one of my machines too:
>
> configure: error: Cannot find liburcu-bp lib. Use LDFLAGS=-Ldir to
> specify its location.
>
> because liburcu-bp.so was in /usr/local/lib which, for some reason,
> does not seem to be visible by UST 0.15.
>
> Please keep ltt-dev in CC, so other people can learn from the answers,
> and so that other developers involved in the project will not each
> take time to reply to the same problem.
>
> Thanks,
>
> Mathieu
>
>>
>> Thanks,
>> Zvika.
>>
>> ----- Original Message ----- From: "Mathieu Desnoyers"
>> <compudj at krystal.dyndns.org>
>> To: "Zvi Vered" <veredz72 at gmail.com>
>> Sent: Saturday, August 20, 2011 15:19
>> Subject: Re: [ltt-dev] ust-0.15: liburcu-cds.so.1 not found
>>
>>
>> * Zvi Vered (veredz72 at gmail.com) wrote:
>>> Hello,
>>>
>>> I will soon try the ldconfig solution.
>>>
>>> Is it possible to compile UST without userspace RCU ?
>>
>> No.
>>
>>>
>>> My target has only one CPU so I think userspace RCU is not mandatory.
>>
>> Multiple threads can still be scheduled on that CPU, so you need
>> protection provided by RCU.
>>
>> Thanks,
>>
>> Mathieu
>>
>>>
>>> Am I right ?
>>>
>>> Thanks,
>>> Zvika.
>>>
>>> ----- Original Message ----- From: "Mathieu Desnoyers"
>>> <compudj at krystal.dyndns.org>
>>> To: "Zvi Vered" <veredz72 at gmail.com>
>>> Cc: <ltt-dev at lists.casi.polymtl.ca>
>>> Sent: Saturday, August 20, 2011 2:36
>>> Subject: Re: [ltt-dev] ust-0.15: liburcu-cds.so.1 not found
>>>
>>>
>>>> * Zvi Vered (veredz72 at gmail.com) wrote:
>>>>> Hello,
>>>>>
>>>>> I'm building ust-0.15 with gcc cross compiler I build using
>>>>> crosstool-ng project.
>>>>>
>>>>> I build urcu using this gcc. The ./configure, make, make install
>>>>> were OK.
>>>>>
>>>>> Then I ran ./configure with the right CC,PATH,LD_LIBRARY_PATH (as
>>>>> used when building urcu) to point to my gcc instead of the default gcc.
>>>>>
>>>>> I got the following error:
>>>>>
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld:
>>>>> warning: liburcu-cds.so.1, needed by
>>>>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using
>>>>> -rpath or -rpath-link)
>>>>
>>>> I guess you are using userspace RCU git head ? Try to make clean,
>>>> make, make install userspace RCU again, and run ldconfig. We're in
>>>> the process of changing a few inter-lib dependencies within the
>>>> userspace RCU project.
>>>>
>>>> Thanks,
>>>>
>>>> Mathieu
>>>>
>>>>>
>>>>> Attached the full config.log
>>>>>
>>>>> Can you help ?
>>>>>
>>>>> Thanks,
>>>>> Zvika.
>>>>
>>>>> This file contains any messages produced by compilers while
>>>>> running configure, to aid debugging if configure makes a mistake.
>>>>>
>>>>> It was created by ust configure 0.15, which was generated by GNU
>>>>> Autoconf 2.65. Invocation command line was
>>>>>
>>>>> $ ./configure --prefix=/home/zvivered/GNU/ust
>>>>>
>>>>> ## --------- ##
>>>>> ## Platform. ##
>>>>> ## --------- ##
>>>>>
>>>>> hostname = localhost.localdomain
>>>>> uname -m = i686
>>>>> uname -r = 2.6.18-238.19.1.el5
>>>>> uname -s = Linux
>>>>> uname -v = #1 SMP Fri Jul 15 07:32:29 EDT 2011
>>>>>
>>>>> /usr/bin/uname -p = unknown
>>>>> /bin/uname -X = unknown
>>>>>
>>>>> /bin/arch = i686
>>>>> /usr/bin/arch -k = unknown
>>>>> /usr/convex/getsysinfo = unknown
>>>>> /usr/bin/hostinfo = unknown
>>>>> /bin/machine = unknown
>>>>> /usr/bin/oslevel = unknown
>>>>> /bin/universe = unknown
>>>>>
>>>>> PATH: /usr/lib/qt-3.3/bin
>>>>> PATH: /usr/kerberos/bin
>>>>> PATH: /usr/local/bin
>>>>> PATH: /usr/bin
>>>>> PATH: /bin
>>>>> PATH: /usr/X11R6/bin
>>>>> PATH: /home/zvivered/bin
>>>>> PATH:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/lib
>>>>> exec/gcc/i686-nptl-linux-gnu/4.3.2
>>>>> PATH:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/libexec/gcc/i686-nptl-l
>>>>> inux-gnu/4.3.2
>>>>>
>>>>>
>>>>> ## ----------- ##
>>>>> ## Core tests. ##
>>>>> ## ----------- ##
>>>>>
>>>>> configure:2343: checking build system type
>>>>> configure:2357: result: i686-pc-linux-gnu
>>>>> configure:2377: checking host system type
>>>>> configure:2390: result: i686-pc-linux-gnu
>>>>> configure:2410: checking target system type
>>>>> configure:2423: result: i686-pc-linux-gnu
>>>>> configure:2467: checking for a BSD-compatible install
>>>>> configure:2535: result: /usr/bin/install -c
>>>>> configure:2546: checking whether build environment is sane
>>>>> configure:2596: result: yes
>>>>> configure:2737: checking for a thread-safe mkdir -p
>>>>> configure:2776: result: /bin/mkdir -p
>>>>> configure:2789: checking for gawk
>>>>> configure:2805: found /usr/bin/gawk
>>>>> configure:2816: result: gawk
>>>>> configure:2827: checking whether make sets $(MAKE)
>>>>> configure:2849: result: yes
>>>>> configure:3013: checking for gcc
>>>>> configure:3040: result:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>>>> -gcc
>>>>> configure:3269: checking for C compiler version
>>>>> configure:3278:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>>>> -gcc
>>>>> --version >&5
>>>>> .i686-nptl-linux-gnu-gcc (crosstool-NG-1.5.0) 4.3.2 Copyright (C)
>>>>> 2008 Free Software Foundation, Inc.
>>>>> This is free software; see the source for copying conditions.
>>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR
>>>>> A PARTICULAR PURPOSE.
>>>>>
>>>>> configure:3289: $? = 0
>>>>> configure:3278:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>>>> -gcc
>>>>> -v >&5
>>>>> Using built-in specs.
>>>>> Target: i686-nptl-linux-gnu
>>>>> Configured with:
>>>>> /home/zvivered/GNU/crosstool-1.5.0/working/src/gcc-4.3.2/configure
>>>>> --build=i386-build_redhat-linux-gnu
>>>>> --host=i386-build_redhat-linux-gnu --target=i686-nptl-linux-gnu
>>>>> --prefix=/home/zvivered/GNU/crosstool-1.5.0/release
>>>>> --with-sysroot=/home/zvivered/GNU/crosstool-1.5.0/release/i686-npt
>>>>> l-linux-gnu//sys-root --enable-languages=c --disable-multilib
>>>>> --with-arch=i686 --with-pkgversion=crosstool-NG-1.5.0
>>>>> --enable-__cxa_atexit
>>>>> --with-gmp=/home/zvivered/GNU/crosstool-1.5.0/release
>>>>> --with-mpfr=/home/zvivered/GNU/crosstool-1.5.0/release
>>>>> --with-local-prefix=/home/zvivered/GNU/crosstool-1.5.0/release/i68
>>>>> 6-nptl-linux-gnu//sys-root --disable-nls --enable-threads=posix
>>>>> --enable-symvers=gnu
>>>>> --enable-c99 --enable-long-long --enable-target-optspace>> Thread
>>>>> model: posix>> gcc version 4.3.2 (crosstool-NG-1.5.0)>>
>>>>> configure:3289: $? = 0>>
>>>>> configure:3278:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686
>>>>> -nptl-linux-gnu-gcc
>>>>> -V>&5>> .i686-nptl-linux-gnu-gcc: '-V' option must have argument>>
>>>>> configure:3289: $? = 1>>
>>>>> configure:3278:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686
>>>>> -nptl-linux-gnu-gcc -qversion >&5>> .i686-nptl-linux-gnu-gcc:
>>>>> unrecognized option '-qversion'>> .i686-nptl-linux-gnu-gcc: no
>>>>> input
>>> files>> configure:3289: $? = 1>> configure:3309: checking whether
>>> files>> the C
>>> compiler works>>
>>> configure:3331:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib
>>> conftest.c >&5>> configure:3335: $? = 0>> configure:3384: result:
>>> yes>> configure:3387: checking for C compiler default output file
>>> name>> configure:3389: result: a.out>> configure:3395: checking for
>>> suffix of executables>>
>>> configure:3402:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:3406: $? =
>>> 0>>
>>> configure:3428: result:>> configure:3450: checking whether we are
>>> cross
>>> compiling>>
>>> configure:3458:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:3462: $? =
>>> 0>>
>>> configure:3469: ./conftest>> con
>>> figure:3473: $? = 0>> configure:3488: result: no>> configure:3493:
>>> checking for suffix of object files>>
>>> configure:3515:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3519:
>>> $? = 0>> configure:3540: result: o>> configure:3544: checking
>>> whether we are using the GNU C compiler>>
>>> configure:3563:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3563:
>>> $? = 0>> configure:3572: result: yes>> configure:3581: checking
>>> whether/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linu
>>> x-gnu-gccaccepts
>>> -g>>
>>> configure:3601:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -gconftest.c >&5>> configure:3601: $? = 0>> configure:3642: result:
>>> yes>> configure:3659: checking
>>> for/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gn
>>> u-gccoption to accept ISO C89>> configure:3723:/home/zvi
>>> vered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c
>>> -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:3723:
>>> $? =
>>> 0>> configure:3736: result: none needed>> configure:3767: checking
>>> 0>> for
>>> style of include used by make>> configure:3795: result: GNU>>
>>> configure:3820: checking dependency style
>>> of/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gcc>>
>>> configure:3930: result: gcc3>> configure:3945: checking whether make
>>> sets $(MAKE)>> configure:3967: result: yes>> configure:4001:
>>> checking for a sed that does not truncate output>> configure:4065: result:
>>> /bin/sed>> configure:4083: checking for grep that handles long lines
>>> and -e>> configure:4141: result: /bin/grep>> configure:4146:
>>> checking for egrep>> configure:4208: result: /bin/grep -E>> configure:4213:
>>> checking for fgrep>> configure:4275: result: /bin/grep -F>>
>>> configure:4310: checking for ld used
>>> by/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gcc>>
>>> configure:4377: r
>
>>> esult:/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu
>>> /bin/ld>>
>>> configure:4384: checking if the
>>> linker(/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gn
>>> u/bin/ld) isGNU ld>> configure:4399: result: yes>> configure:4411:
>>> checking for
>>> BSD- or MS-compatible name lister (nm)>> configure:4460: result:
>>> /usr/bin/nm -B>> configure:4578: checking the name lister
>>> (/usr/bin/nm
>>> -B) interface>>
>>> configure:4585:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:4588:
>>> /usr/bin/nm -B "conftest.o">> configure:4591: output>> 00000000 B
>>> some_variable>> configure:4598: result: BSD nm>> configure:4601:
>>> checking whether ln -s works>> configure:4605: result: yes>>
>>> configure:4613: checking the maximum length of command line
>>> arguments>>
>>> configure:4733: result: 98304>> configure:4750: checking whether the
>>> shell understands some XSIconstructs>> configure:4760: result: yes>>
>>> configure:4764: chec
>>> king whether the shell understands "+=">> configure:4770: result:
>>> yes>>
>>> configure:4805: checking
>>> for/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bi
>>> n/ld optionto reload object files>> configure:4812: result: -r>>
>>> configure:4881: checking for objdump>> configure:4897: found
>>> /usr/bin/objdump>> configure:4908: result: objdump>> configure:4940:
>>> checking how to recognize dependent libraries>> configure:5136: result:
>>> pass_all>> configure:5196: checking for ar>> configure:5212: found
>>> /usr/bin/ar>> configure:5223: result: ar>> configure:5301: checking
>>> for
>>> strip>> configure:5317: found /usr/bin/strip>> configure:5328: result:
>>> strip>> configure:5400: checking for ranlib>> configure:5416: found
>>> /usr/bin/ranlib>> configure:5427: result: ranlib>> configure:5517:
>>> checking command to parse /usr/bin/nm -B output
>>> from/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-g
>>> nu-gccobject>>
>>>
>>> configure:5635:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu -gcc -c -I/home/zvivered/GNU/urcu/include conftest.c
>>> >&5>>
>>> configure:5638: $? = 0>> configure:5642: /usr/bin/nm -B conftest.o
>>> \| sed -n -e's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
>>> ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1\2 \2/p' \> conftest.nm>> configure:5645:
>>> $? = 0>>
>>> configure:5699:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c conftstm.o >&5>> configure:5702:
>>> $? = 0>> configure:5740: result: ok>> configure:6549: checking how
>>> to run the C preprocessor>> configure:6619:
>>> result:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linu
>>> x-gnu-cpp>>
>>> configure:6639:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-cppconftest.c>>
>>> configure:6639: $? = 0>>
>>> configure:6653:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-cppconftest.c>>
>>> conftest.c:13:28: error: ac_nonexistent.h: No such file or
>>> directory>>
>>> configure:6653: $? = 1>> configure: failed program was:>> | /*
>>> confdefs.h */>> | #define PACKAGE_NAME "ust">> | #define
>>> PACKAGE_TARNAME "ust">> | #define PACKAGE_VERSION "0.15">> | #define
>>> PACKAGE_STRING "ust 0.15">> | #define PACKAGE_BUGREPORT "mathieu dot
>>> desnoyers at efficios dot com">> | #define PACKAGE_URL "">> |
>>> #define PACKAGE "ust">> | #define VERSION "0.15">> | #define
>>> VERSION_MAJOR 0>> | #define VERSION_MINOR 15>> | /* end confdefs.h. */>> | #include <ac_nonexistent.h>>> configure:6682:
>>> checking for ANSI C header files>>
>>> configure:6702:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c
>>> >&5>> configure:6702: $?
>>> = 0>>
>>> configure:6775:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:6775: $? =
>>> 0>>
>>> configure:6775: ./conftest>> configure:6775: $? = 0>> configure:6786:
>>> result: yes>> configure:6799: checking for sys/ types.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> sys/stat.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> stdlib.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> string.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> memory.h>> configure:6799:/home/zvivered/GNU
>>> /crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c
>>> -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? =
>>> 0>> configure:6799: result: yes>> configure:6799: checking for
>>> strings.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> inttypes.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> stdint.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6799:
>>> $? = 0>> configure:6799: result: yes>> configure:6799: checking for
>>> unistd.h>>
>>> configure:6799:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-lin ux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c
>>> >&5>>
>>> configure:6799: $? = 0>> configure:6799: result: yes>> configure:6814:
>>> checking for dlfcn.h>>
>>> configure:6814:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>> configure:6814:
>>> $? = 0>> configure:6814: result: yes>> configure:6998: checking for
>>> objdir>> configure:7013: result: .libs>> configure:7309: checking
>>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gccsupports
>>> -fno-rtti -fno-exceptions>>
>>> configure:7327:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include -fno-rtti -fno-exceptions
>>> conftest.c >&5>> cc1: warning: command line option "-fno-rtti" is
>>> valid for C++/ObjC++ butnot for C>> configure:7331: $? = 0>> configure:7344:
>>> result: no>> configure:7364: checking
>>> for/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gn
>>> u-gccoption
>>> to produce PIC>> c
>>> onfigure:7636: result: -fPIC -DPIC>> configure:7648: checking
>>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gcc
>>> PICflag -fPIC -DPIC works>>
>>> configure:7666:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include -fPIC -DPIC
>>> -DPIC conftest.c >&5>>
>>> configure:7670: $? = 0>> configure:7683: result: yes>> configure:7707:
>>> checking
>>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gccstatic flag -static works>> configure:7735: result: yes>>
>>> configure:7750:
>>> checking
>>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gccsupports
>>> -c -o file.o>>
>>> configure:7771:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include -o
>>> out/conftest2.o conftest.c >&5>>
>>> configure:7775: $? = 0>> configure:7797: result: yes>> configure:7805:
>>> checking
>>> if/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu
>>> -gccsupports -c -o file.o>> configure:7852: result: yes>>
>>> configure:7885: checking whether
>>> the/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gn
>>> u-gcclinker(/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-lin
>>> ux-gnu/bin/ld)supports shared libraries>> configure:8876: result:
>>> yes>> configure:8913: checking whether -lc should be explicitly
>>> linked in>>
>>> configure:8918:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c
>>> >&5>> configure:8921: $?
>>> = 0>>
>>> configure:8936:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o
>>> conftest 2\>\&1 \|bin/grep -lc \>/dev/null 2\>\&1>>
>>> configure:8939: $? = 0>>
>>> configure:8951: result: no>> configure:9115: checking dynamic linker
>>> characteristics>>
>>> configure:9548:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-n
>>> ptl-linux-gnu-gcc -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/lib -Wl,-rpath -Wl,/f oo conftest.c >&5>>
>>> configure:9548: $? = 0>> configure:9778: result:
>>> GNU/Linux ld.so>> configure:9880: checking how to hardcode library
>>> paths into programs>> configure:9905: result: immediate>>
>>> configure:10425: checking whether stripping libraries is possible>>
>>> configure:10430: result: yes>> configure:10465: checking if libtool
>>> supports shared libraries>> configure:10467: result: yes>>
>>> configure:10470: checking whether to build shared libraries>>
>>> configure:10491: result: yes>> configure:10494: checking whether to
>>> build static libraries>> configure:10498: result: yes>>
>>> configure:10552: checking for inline>>
>>> configure:10568:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -c -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
>>> configure:10568: $? = 0>> configure:10576: result: inline>>
>>> configure:10610: checking for stdlib.h>> configure:10610: result:
>>> yes>>
>>> configure:10620: checking for GNU libc compatible malloc>>
>>> configure:10644:/home/zvivered/GNU/crosst
>>> ool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -oconftest
>>> -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10644: $? =
>>> 0>> configure:10644: ./conftest>> configure:10644: $? = 0>>
>>> configure:10654: result: yes>> configure:10678: checking for
>>> gettimeofday>>
>>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
>>> 0>> configure:10678: result: yes>> configure:10678: checking for
>>> munmap>>
>>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
>>> 0>> configure:10678: result: yes>> configure:10678: checking for
>>> socket>>
>>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include -L/home
>>> /zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? = 0>>
>>> configure:10678: result: yes>> configure:10678: checking for
>>> strerror>>
>>>
>>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
>>> 0>> configure:10678: result: yes>> configure:10678: checking for
>>> strtol>>
>>> configure:10678:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/libconftest.c >&5>> configure:10678: $? =
>>> 0>> configure:10678: result: yes>> configure:10696: checking
>>> 0>> urcu-bp.h
>>> usability>>
>>> configure:10696:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -c -Wall -I/home/zvivered/GNU/urcu/include conftest.c >&5>>
>>> configure:10696: $? = 0>> configure:10696: result: yes>>
>>> configure:10696: checking urcu-bp.h presence>>
>>> configure:10696:/home/zvivered/GNU/cro
>>> sstool-1.5.0/release/bin/i686-nptl-linux-gnu-cppconftest.c>>
>>> conftest.c:32:21: error: urcu-bp.h: No such file or directory>>
>>> configure:10696: $? = 1>> configure: failed program was:>> | /*
>>> confdefs.h */>> | #define PACKAGE_NAME "ust">> | #define
>>> PACKAGE_TARNAME "ust">> | #define PACKAGE_VERSION "0.15">> | #define
>>> PACKAGE_STRING "ust 0.15">> | #define PACKAGE_BUGREPORT "mathieu dot
>>> desnoyers at efficios dot com">> | #define PACKAGE_URL "">> |
>>> #define PACKAGE "ust">> | #define VERSION "0.15">> | #define
>>> VERSION_MAJOR 0>>
>>> | #define VERSION_MINOR 15>> | #define STDC_HEADERS 1>> | #define
>>> HAVE_SYS_TYPES_H 1>> | #define HAVE_SYS_STAT_H 1>> | #define
>>> HAVE_STDLIB_H 1>> | #define HAVE_STRING_H 1>> | #define
>>> HAVE_MEMORY_H
>>> 1>> | #define HAVE_STRINGS_H 1>> | #define HAVE_INTTYPES_H 1>> |
>>> #define HAVE_STDINT_H 1>> | #define HAVE_UNISTD_H 1>> | #define
>>> HAVE_DLFCN_H 1>> | #define LT_OBJDIR ".libs/">> | #define
>>> HAVE_STDLIB_H 1>> | #define HAVE_MALLOC 1>> | #define
>>> HAVE_GETTIMEOFDAY
>>> 1>> | #d
>>> efine HAVE_MUNMAP 1>> | #define HAVE_SOCKET 1>> | #define
>>> HAVE_STRERROR
>>> 1>> | #define HAVE_STRTOL 1>> | /* end confdefs.h. */>> | #include
>>> <urcu-bp.h>>> configure:10696: result: no>> configure:10696: WARNING:
>>> urcu-bp.h: accepted by the compiler, rejectedby the preprocessor!>>
>>> configure:10696: WARNING: urcu-bp.h: proceeding with the
>>> compiler'sresult>> configure:10696: checking for urcu-bp.h>>
>>> configure:10696: result: yes>> configure:10711: checking for
>>> synchronize_rcu_bp in -lurcu-bp>>
>>> configure:10736:/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc
>>> -oconftest -Wall -I/home/zvivered/GNU/urcu/include
>>> -L/home/zvivered/GNU/urcu/lib conftest.c -lurcu-bp
>>> >&5>>/home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld:
>>> warning: liburcu-cds.so.1, neededby
>>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using
>>> -rpathor -rpath-link)>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so:
>>> undefined referen
>>> ce to`cds_wfq_enqueue'>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so:
>>> undefined reference to`cds_wfq_init'>>
>>> /home/zvivered/GNU/urcu/lib/liburcu-bp.so: undefined reference
>>> to`cds_wfq_node_init'>> collect2: ld returned 1 exit status>>
>>> configure:10736: $? = 1>> configure: failed program was:>> | /*
>>> confdefs.h */>> | #define PACKAGE_NAME "ust">> | #define
>>> PACKAGE_TARNAME "ust">> | #define PACKAGE_VERSION "0.15">> | #define
>>> PACKAGE_STRING "ust 0.15">> | #define PACKAGE_BUGREPORT "mathieu dot
>>> desnoyers at efficios dot com">> | #define PACKAGE_URL "">> |
>>> #define PACKAGE "ust">> | #define VERSION "0.15">> | #define
>>> VERSION_MAJOR 0>>
>>> | #define VERSION_MINOR 15>> | #define STDC_HEADERS 1>> | #define
>>> HAVE_SYS_TYPES_H 1>> | #define HAVE_SYS_STAT_H 1>> | #define
>>> HAVE_STDLIB_H 1>> | #define HAVE_STRING_H 1>> | #define
>>> HAVE_MEMORY_H
>>> 1>> | #define HAVE_STRINGS_H 1>> | #define HAVE_INTTYPES_H 1>> |
>>> #define HAVE_STDINT_H 1>> | #define HAVE_UNISTD_H 1>> | #define
>>> HAVE_DLFCN_H 1>> | #define LT_O BJDIR ".libs/">> | #define
>>> HAVE_STDLIB_H 1>> | #define HAVE_MALLOC 1>>
>>> | #define HAVE_GETTIMEOFDAY 1>> | #define HAVE_MUNMAP 1>> | #define
>>> HAVE_SOCKET 1>> | #define HAVE_STRERROR 1>> | #define HAVE_STRTOL
>>> 1>> | #define HAVE_URCU_BP_H 1>> | /* end confdefs.h. */>> |>> | /*
>>> Override any GCC internal prototype to avoid an error.>> | Use
>>> char because int might match the return type of a GCC>> | builtin
>>> and then its argument prototype would still apply. */>> | #ifdef
>>> __cplusplus>> | extern "C">> | #endif>> | char synchronize_rcu_bp
>>> ();>> | int>> | main ()>> | {>> | return synchronize_rcu_bp ();>> |
>>> ;>> | return 0;>> | }>> configure:10745: result: no>>
>>> configure:10755: error: Cannot find liburcu-bp lib. Use
>>> LDFLAGS=-Ldir tospecify its location.>>>> ##
>>> ---------------- ##>> ## Cache variables. ##>> ## ----------------
>>> ##>>>> ac_cv_build=i686-pc-linux-gnu>> ac_cv_c_compiler_gnu=yes>>
>>> ac_cv_c_inline=inline>>
>>> ac_cv_env_CC_set=set>>ac_cv_env_CC_value=/home/zvivered/GNU/cros
>>> stool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
>>> ac_cv_env_CFLAGS_set=set>>
>>> ac_cv_env_CFLAGS_value=-I/home/zvivered/GNU/urcu/include>>
>>> ac_cv_env_CPPFLAGS_set=>> ac_cv_env_CPPFLAGS_value=>>
>>> ac_cv_env_CPP_set=set>>ac_cv_env_CPP_value=/home/zvivered/GNU/crosst
>>> ool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp>>
>>> ac_cv_env_LDFLAGS_set=set>>
>>> ac_cv_env_LDFLAGS_value=-L/home/zvivered/GNU/urcu/lib>>
>>> ac_cv_env_LIBS_set=>> ac_cv_env_LIBS_value=>>
>>> ac_cv_env_build_alias_set=>> ac_cv_env_build_alias_value=>>
>>> ac_cv_env_host_alias_set=>> ac_cv_env_host_alias_value=>>
>>> ac_cv_env_target_alias_set=>> ac_cv_env_target_alias_value=>>
>>> ac_cv_func_gettimeofday=yes>> ac_cv_func_malloc_0_nonnull=yes>>
>>> ac_cv_func_munmap=yes>> ac_cv_func_socket=yes>>
>>> ac_cv_func_strerror=yes>> ac_cv_func_strtol=yes>>
>>> ac_cv_header_dlfcn_h=yes>> ac_cv_header_inttypes_h=yes>>
>>> ac_cv_header_memory_h=yes>> ac_cv_header_stdc=yes>>
>>> ac_cv_header_stdint_h=yes>> ac_cv_header_stdlib_h=yes>>
>>> ac_cv_header_string_h=yes>> ac_cv_header_strin gs_h=yes>>
>>> ac_cv_header_sys_stat_h=yes>> ac_cv_header_sys_types_h=yes>>
>>> ac_cv_header_unistd_h=yes>> ac_cv_header_urcu_bp_h=yes>>
>>> ac_cv_host=i686-pc-linux-gnu>>
>>> ac_cv_lib_urcu_bp_synchronize_rcu_bp=no>> ac_cv_objext=o>>
>>> ac_cv_path_EGREP='/bin/grep -E'>> ac_cv_path_FGREP='/bin/grep -F'>>
>>> ac_cv_path_GREP=/bin/grep>> ac_cv_path_SED=/bin/sed>>
>>> ac_cv_path_install='/usr/bin/install -c'>>
>>> ac_cv_path_mkdir=/bin/mkdir>>
>>> ac_cv_prog_AWK=gawk>>ac_cv_prog_CPP=/home/zvivered/GNU/crosstool-1.5
>>> .0/release/bin/i686-nptl-linux-gnu-cpp>>
>>>
>>> ac_cv_prog_ac_ct_AR=ar>>ac_cv_prog_ac_ct_CC=/home/zvivered/GNU/cross
>>> tool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc>>
>>> ac_cv_prog_ac_ct_OBJDUMP=objdump>> ac_cv_prog_ac_ct_RANLIB=ranlib>>
>>> ac_cv_prog_ac_ct_STRIP=strip>> ac_cv_prog_cc_c89=>>
>>> ac_cv_prog_cc_g=yes>> ac_cv_prog_make_make_set=yes>>
>>> ac_cv_target=i686-pc-linux-gnu>>
>>> am_cv_CC_dependencies_compiler_type=gcc3>>
>>> lt_cv_deplibs_check_method=pass_all>>
>>> lt_cv_file_magic_cmd='$MAGIC_CMD'>> lt_cv_file_magic_test_file =>>
>>> lt_cv_ld_reload_flag=-r>> lt_cv_nm_interface='BSD nm'>>
>>> lt_cv_objdir=.libs>>lt_cv_path_LD=/home/zvivered/GNU/crosstool-1.5.0
>>> /release/i686-nptl-linux-gnu/bin/ld>>
>>> lt_cv_path_NM='/usr/bin/nm -B'>> lt_cv_prog_compiler_c_o=yes>>
>>> lt_cv_prog_compiler_pic_works=yes>>
>>> lt_cv_prog_compiler_rtti_exceptions=no>>
>>> lt_cv_prog_compiler_static_works=yes>> lt_cv_prog_gnu_ld=yes>>
>>> lt_cv_sys_global_symbol_pipe='sed -n -e'\''s/^.*[
>>> ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1
>>> \2 \2/p'\'''>> lt_cv_sys_global_symbol_to_c_name_address='sed -n -e
>>> '\''s/^: \([^ ]*\)$/ {\"\1\", (void *) 0},/p'\'' -e
>>> '\''s/^[ABCDGIRSTW]* \([^ ]*\)\([^ ]*\)$/ {"\2", (void *)
>>> \&\2},/p'\'''>>
>>> lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e
>>> '\''s/^:\([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e
>>> '\''s/^[ABCDGIRSTW]* \([^ ]*\)\(lib[^ ]*\)$/ {"\2", (void *)
>>> \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]*\([^ ]*\) \([^ ]*\)$/ {"lib\2",
>>> (void *) \&\2},/p'\'''>> lt_cv_sys_global_symbol_to_cdecl= 'sed -n
>>> -e '\''s/^T .* \(.*\)$/externint \1();/p'\'' -e
>>> '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''>>
>>> lt_cv_sys_max_cmd_len=98304>>>> ## ----------------- ##>> ## Output
>>> variables. ##>> ## ----------------- ##>>>> ACLOCAL='${SHELL}
>>> /home/zvivered/GNU/ust-0.15/config/missing --runaclocal-1.11'>>
>>> AMDEPBACKSLASH='\'>> AMDEP_FALSE='#'>> AMDEP_TRUE=''>>
>>> AMTAR='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run
>>> tar'>> AM_BACKSLASH='\'>> AM_DEFAULT_VERBOSITY='0'>> AR='ar'>>
>>> AUTOCONF='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing
>>> --runautoconf'>> AUTOHEADER='${SHELL}
>>> /home/zvivered/GNU/ust-0.15/config/missing --runautoheader'>>
>>> AUTOMAKE='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing
>>> --runautomake-1.11'>>
>>> AWK='gawk'>>CC='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-
>>> nptl-linux-gnu-gcc'>> CCDEPMODE='depmode=gcc3'>> CFLAGS='-Wall
>>> -I/home/zvivered/GNU/urcu/include'>>CPP='/home/zvivered/GNU/crosstoo
>>> l-1.5.0/release/bin/i686-nptl-linux-gnu-cpp'>>
>>> CPPFLAG
>>> S=''>> CYGPATH_W='echo'>> DEFS=''>> DEPDIR='.deps'>> DSYMUTIL=''>>
>>> DUMPBIN=''>> ECHO_C=''>> ECHO_N='-n'>> ECHO_T=''>> EGREP='/bin/grep
>>> -E'>> EXEEXT=''>> FGREP='/bin/grep -F'>> GREP='/bin/grep'>>
>>> INSTALL_DATA='${INSTALL} -m 644'>> INSTALL_PROGRAM='${INSTALL}'>>
>>> INSTALL_SCRIPT='${INSTALL}'>> INSTALL_STRIP_PROGRAM='$(install_sh)
>>> -c
>>> -s'>>LD='/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-
>>> gnu/bin/ld'>> LDFLAGS='-L/home/zvivered/GNU/urcu/lib'>>
>>> LIBFORMAT=''>> LIBOBJS=''>> LIBS=''>> LIBTOOL='$(SHELL)
>>> $(top_builddir)/libtool'>> LIPO=''>> LN_S='ln -s'>> LTLIBOBJS=''>>
>>> MAJOR_VERSION='0'>> MAKEINFO='${SHELL}
>>> /home/zvivered/GNU/ust-0.15/config/missing --runmakeinfo'>>
>>> MINOR_VERSION='15'>> MKDIR_P='/bin/mkdir -p'>> NM='/usr/bin/nm -B'>>
>>> NMEDIT=''>> OBJDUMP='objdump'>> OBJEXT='o'>> OTOOL64=''>> OTOOL=''>>
>>> PACKAGE='ust'>> PACKAGE_BUGREPORT='mathieu dot desnoyers at efficios
>>> dot com'>> PACKAGE_NAME='ust'>> PACKAGE_STRING='ust 0.15'>>
>>> PACKAGE_TARNAME='ust'>> PACKAGE_URL=''>> PACK AGE_VERSION='0.15'>>
>>> PATH_SEPARATOR=':'>> RANLIB='ranlib'>> SED='/bin/sed'>>
>>> SET_MAKE=''>> SHELL='/bin/sh'>> STRIP='strip'>>
>>> VERSION='0.15'>>ac_ct_CC='/home/zvivered/GNU/crosstool-1.5.0/release
>>> /bin/i686-nptl-linux-gnu-gcc'>> ac_ct_DUMPBIN=''>>
>>> am__EXEEXT_FALSE=''>> am__EXEEXT_TRUE=''>> am__fastdepCC_FALSE='#'>>
>>> am__fastdepCC_TRUE=''>> am__include='include'>> am__isrc=''>>
>>> am__leading_dot='.'>> am__quote=''>> am__tar='${AMTAR} chof -
>>> "$$tardir"'>> am__untar='${AMTAR} xf -'>>
>>> bindir='${exec_prefix}/bin'>> build='i686-pc-linux-gnu'>>
>>> build_alias=''>> build_cpu='i686'>> build_os='linux-gnu'>>
>>> build_vendor='pc'>> datadir='${datarootdir}'>>
>>> datarootdir='${prefix}/share'>>
>>> docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'>>
>>> dvidir='${docdir}'>> exec_prefix='NONE'>> host='i686-pc-linux-gnu'>>
>>> host_alias=''>> host_cpu='i686'>> host_os='linux-gnu'>>
>>> host_vendor='pc'>> htmldir='${docdir}'>>
>>> includedir='${prefix}/include'>> infodir='${datarootdir}/info'>>
>>> install_sh='${SHELL} /home/zvivere
>>> d/GNU/ust-0.15/config/install-sh'>> libdir='${exec_prefix}/lib'>>
>>> libexecdir='${exec_prefix}/libexec'>>
>>> localedir='${datarootdir}/locale'>> localstatedir='${prefix}/var'>>
>>> lt_ECHO='echo'>> mandir='${datarootdir}/man'>> mkdir_p='/bin/mkdir
>>> -p'>> oldincludedir='/usr/include'>> pdfdir='${docdir}'>>
>>> prefix='/home/zvivered/GNU/ust'>> program_transform_name='s,x,x,'>>
>>> psdir='${docdir}'>> sbindir='${exec_prefix}/sbin'>>
>>> sharedstatedir='${prefix}/com'>> sysconfdir='${prefix}/etc'>>
>>> target='i686-pc-linux-gnu'>> target_alias=''>> target_cpu='i686'>>
>>> target_os='linux-gnu'>> target_vendor='pc'>>>> ## ----------- ##>>
>>> ## confdefs.h. ##>> ## ----------- ##>>>> /* confdefs.h */>> #define
>>> PACKAGE_NAME "ust">> #define PACKAGE_TARNAME "ust">> #define
>>> PACKAGE_VERSION "0.15">> #define PACKAGE_STRING "ust 0.15">> #define
>>> PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com">>
>>> #define PACKAGE_URL "">> #define PACKAGE "ust">> #define VERSION
>>> "0.15">> #define VERSION_MAJOR 0>> #define VERSI ON_MINOR 15>>
>>> #define STDC_HEADERS 1>> #define HAVE_SYS_TYPES_H 1>> #define
>>> HAVE_SYS_STAT_H 1>> #define HAVE_STDLIB_H 1>> #define HAVE_STRING_H
>>> 1>> #define HAVE_MEMORY_H 1>> #define HAVE_STRINGS_H 1>> #define
>>> HAVE_INTTYPES_H 1>> #define HAVE_STDINT_H 1>> #define HAVE_UNISTD_H
>>> 1>> #define HAVE_DLFCN_H 1>> #define LT_OBJDIR ".libs/">> #define
>>> HAVE_STDLIB_H 1>> #define HAVE_MALLOC 1>> #define HAVE_GETTIMEOFDAY
>>> 1>> #define HAVE_MUNMAP 1>> #define HAVE_SOCKET 1>> #define
>>> HAVE_STRERROR 1>> #define HAVE_STRTOL 1>> #define HAVE_URCU_BP_H
>>> 1>>>> configure: exit 1>>>
>>> _______________________________________________>> ltt-dev mailing
>>> list>> ltt-dev at lists.casi.polymtl.ca>>
>>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev>>> -->
>>> Mathieu Desnoyers> Operating System Efficiency R&D Consultant>
>>> EfficiOS Inc.> http://www.efficios.com
>>>
>>
>> --
>> Mathieu Desnoyers
>> Operating System Efficiency R&D Consultant EfficiOS Inc.
>> http://www.efficios.com
>>
>
> --
> Mathieu Desnoyers
> Operating System Efficiency R&D Consultant EfficiOS Inc.
> http://www.efficios.com
>
_______________________________________________
ltt-dev mailing list
ltt-dev at lists.casi.polymtl.ca
http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
More information about the lttng-dev
mailing list