[ltt-dev] ust-0.15: liburcu-cds.so.1 not found
Mathieu Desnoyers
compudj at krystal.dyndns.org
Fri Aug 19 19:36:07 EDT 2011
* Zvi Vered (veredz72 at gmail.com) wrote:
> Hello,
>
> I'm building ust-0.15 with gcc cross compiler I build using
> crosstool-ng project.
>
> I build urcu using this gcc. The ./configure, make, make install were OK.
>
> Then I ran ./configure with the right CC,PATH,LD_LIBRARY_PATH (as used
> when building urcu) to point to my gcc instead of the default gcc.
>
> I got the following error:
>
> /home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld:
> warning: liburcu-cds.so.1, needed by
> /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using -rpath
> or -rpath-link)
I guess you are using userspace RCU git head ? Try to make clean, make,
make install userspace RCU again, and run ldconfig. We're in the process
of changing a few inter-lib dependencies within the userspace RCU
project.
Thanks,
Mathieu
>
> Attached the full config.log
>
> Can you help ?
>
> Thanks,
> Zvika.
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by ust configure 0.15, which was
> generated by GNU Autoconf 2.65. Invocation command line was
>
> $ ./configure --prefix=/home/zvivered/GNU/ust
>
> ## --------- ##
> ## Platform. ##
> ## --------- ##
>
> hostname = localhost.localdomain
> uname -m = i686
> uname -r = 2.6.18-238.19.1.el5
> uname -s = Linux
> uname -v = #1 SMP Fri Jul 15 07:32:29 EDT 2011
>
> /usr/bin/uname -p = unknown
> /bin/uname -X = unknown
>
> /bin/arch = i686
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> /usr/bin/hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /usr/lib/qt-3.3/bin
> PATH: /usr/kerberos/bin
> PATH: /usr/local/bin
> PATH: /usr/bin
> PATH: /bin
> PATH: /usr/X11R6/bin
> PATH: /home/zvivered/bin
> PATH: /home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/libexec/gcc/i686-nptl-linux-gnu/4.3.2
> PATH: /home/zvivered/GNU/crosstool-1.5.0/release/libexec/gcc/i686-nptl-linux-gnu/4.3.2
>
>
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
>
> configure:2343: checking build system type
> configure:2357: result: i686-pc-linux-gnu
> configure:2377: checking host system type
> configure:2390: result: i686-pc-linux-gnu
> configure:2410: checking target system type
> configure:2423: result: i686-pc-linux-gnu
> configure:2467: checking for a BSD-compatible install
> configure:2535: result: /usr/bin/install -c
> configure:2546: checking whether build environment is sane
> configure:2596: result: yes
> configure:2737: checking for a thread-safe mkdir -p
> configure:2776: result: /bin/mkdir -p
> configure:2789: checking for gawk
> configure:2805: found /usr/bin/gawk
> configure:2816: result: gawk
> configure:2827: checking whether make sets $(MAKE)
> configure:2849: result: yes
> configure:3013: checking for gcc
> configure:3040: result: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> configure:3269: checking for C compiler version
> configure:3278: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc --version >&5
> .i686-nptl-linux-gnu-gcc (crosstool-NG-1.5.0) 4.3.2
> Copyright (C) 2008 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> configure:3289: $? = 0
> configure:3278: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -v >&5
> Using built-in specs.
> Target: i686-nptl-linux-gnu
> Configured with: /home/zvivered/GNU/crosstool-1.5.0/working/src/gcc-4.3.2/configure --build=i386-build_redhat-linux-gnu --host=i386-build_redhat-linux-gnu --target=i686-nptl-linux-gnu --prefix=/home/zvivered/GNU/crosstool-1.5.0/release --with-sysroot=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu//sys-root --enable-languages=c --disable-multilib --with-arch=i686 --with-pkgversion=crosstool-NG-1.5.0 --enable-__cxa_atexit --with-gmp=/home/zvivered/GNU/crosstool-1.5.0/release --with-mpfr=/home/zvivered/GNU/crosstool-1.5.0/release --with-local-prefix=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu//sys-root --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-c99 --enable-long-long --enable-target-optspace
> Thread model: posix
> gcc version 4.3.2 (crosstool-NG-1.5.0)
> configure:3289: $? = 0
> configure:3278: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -V >&5
> .i686-nptl-linux-gnu-gcc: '-V' option must have argument
> configure:3289: $? = 1
> configure:3278: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -qversion >&5
> .i686-nptl-linux-gnu-gcc: unrecognized option '-qversion'
> .i686-nptl-linux-gnu-gcc: no input files
> configure:3289: $? = 1
> configure:3309: checking whether the C compiler works
> configure:3331: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:3335: $? = 0
> configure:3384: result: yes
> configure:3387: checking for C compiler default output file name
> configure:3389: result: a.out
> configure:3395: checking for suffix of executables
> configure:3402: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:3406: $? = 0
> configure:3428: result:
> configure:3450: checking whether we are cross compiling
> configure:3458: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:3462: $? = 0
> configure:3469: ./conftest
> configure:3473: $? = 0
> configure:3488: result: no
> configure:3493: checking for suffix of object files
> configure:3515: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:3519: $? = 0
> configure:3540: result: o
> configure:3544: checking whether we are using the GNU C compiler
> configure:3563: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:3563: $? = 0
> configure:3572: result: yes
> configure:3581: checking whether /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc accepts -g
> configure:3601: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -g conftest.c >&5
> configure:3601: $? = 0
> configure:3642: result: yes
> configure:3659: checking for /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc option to accept ISO C89
> configure:3723: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:3723: $? = 0
> configure:3736: result: none needed
> configure:3767: checking for style of include used by make
> configure:3795: result: GNU
> configure:3820: checking dependency style of /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> configure:3930: result: gcc3
> configure:3945: checking whether make sets $(MAKE)
> configure:3967: result: yes
> configure:4001: checking for a sed that does not truncate output
> configure:4065: result: /bin/sed
> configure:4083: checking for grep that handles long lines and -e
> configure:4141: result: /bin/grep
> configure:4146: checking for egrep
> configure:4208: result: /bin/grep -E
> configure:4213: checking for fgrep
> configure:4275: result: /bin/grep -F
> configure:4310: checking for ld used by /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> configure:4377: result: /home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld
> configure:4384: checking if the linker (/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld) is GNU ld
> configure:4399: result: yes
> configure:4411: checking for BSD- or MS-compatible name lister (nm)
> configure:4460: result: /usr/bin/nm -B
> configure:4578: checking the name lister (/usr/bin/nm -B) interface
> configure:4585: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:4588: /usr/bin/nm -B "conftest.o"
> configure:4591: output
> 00000000 B some_variable
> configure:4598: result: BSD nm
> configure:4601: checking whether ln -s works
> configure:4605: result: yes
> configure:4613: checking the maximum length of command line arguments
> configure:4733: result: 98304
> configure:4750: checking whether the shell understands some XSI constructs
> configure:4760: result: yes
> configure:4764: checking whether the shell understands "+="
> configure:4770: result: yes
> configure:4805: checking for /home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld option to reload object files
> configure:4812: result: -r
> configure:4881: checking for objdump
> configure:4897: found /usr/bin/objdump
> configure:4908: result: objdump
> configure:4940: checking how to recognize dependent libraries
> configure:5136: result: pass_all
> configure:5196: checking for ar
> configure:5212: found /usr/bin/ar
> configure:5223: result: ar
> configure:5301: checking for strip
> configure:5317: found /usr/bin/strip
> configure:5328: result: strip
> configure:5400: checking for ranlib
> configure:5416: found /usr/bin/ranlib
> configure:5427: result: ranlib
> configure:5517: checking command to parse /usr/bin/nm -B output from /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc object
> configure:5635: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:5638: $? = 0
> configure:5642: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
> configure:5645: $? = 0
> configure:5699: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c conftstm.o >&5
> configure:5702: $? = 0
> configure:5740: result: ok
> configure:6549: checking how to run the C preprocessor
> configure:6619: result: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp
> configure:6639: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp conftest.c
> configure:6639: $? = 0
> configure:6653: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp conftest.c
> conftest.c:13:28: error: ac_nonexistent.h: No such file or directory
> configure:6653: $? = 1
> configure: failed program was:
> | /* confdefs.h */
> | #define PACKAGE_NAME "ust"
> | #define PACKAGE_TARNAME "ust"
> | #define PACKAGE_VERSION "0.15"
> | #define PACKAGE_STRING "ust 0.15"
> | #define PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com"
> | #define PACKAGE_URL ""
> | #define PACKAGE "ust"
> | #define VERSION "0.15"
> | #define VERSION_MAJOR 0
> | #define VERSION_MINOR 15
> | /* end confdefs.h. */
> | #include <ac_nonexistent.h>
> configure:6682: checking for ANSI C header files
> configure:6702: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6702: $? = 0
> configure:6775: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:6775: $? = 0
> configure:6775: ./conftest
> configure:6775: $? = 0
> configure:6786: result: yes
> configure:6799: checking for sys/types.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for sys/stat.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for stdlib.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for string.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for memory.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for strings.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for inttypes.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for stdint.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6799: checking for unistd.h
> configure:6799: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6799: $? = 0
> configure:6799: result: yes
> configure:6814: checking for dlfcn.h
> configure:6814: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:6814: $? = 0
> configure:6814: result: yes
> configure:6998: checking for objdir
> configure:7013: result: .libs
> configure:7309: checking if /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc supports -fno-rtti -fno-exceptions
> configure:7327: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include -fno-rtti -fno-exceptions conftest.c >&5
> cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
> configure:7331: $? = 0
> configure:7344: result: no
> configure:7364: checking for /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc option to produce PIC
> configure:7636: result: -fPIC -DPIC
> configure:7648: checking if /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc PIC flag -fPIC -DPIC works
> configure:7666: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include -fPIC -DPIC -DPIC conftest.c >&5
> configure:7670: $? = 0
> configure:7683: result: yes
> configure:7707: checking if /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc static flag -static works
> configure:7735: result: yes
> configure:7750: checking if /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc supports -c -o file.o
> configure:7771: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include -o out/conftest2.o conftest.c >&5
> configure:7775: $? = 0
> configure:7797: result: yes
> configure:7805: checking if /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc supports -c -o file.o
> configure:7852: result: yes
> configure:7885: checking whether the /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc linker (/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld) supports shared libraries
> configure:8876: result: yes
> configure:8913: checking whether -lc should be explicitly linked in
> configure:8918: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:8921: $? = 0
> configure:8936: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1
> configure:8939: $? = 0
> configure:8951: result: no
> configure:9115: checking dynamic linker characteristics
> configure:9548: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib -Wl,-rpath -Wl,/foo conftest.c >&5
> configure:9548: $? = 0
> configure:9778: result: GNU/Linux ld.so
> configure:9880: checking how to hardcode library paths into programs
> configure:9905: result: immediate
> configure:10425: checking whether stripping libraries is possible
> configure:10430: result: yes
> configure:10465: checking if libtool supports shared libraries
> configure:10467: result: yes
> configure:10470: checking whether to build shared libraries
> configure:10491: result: yes
> configure:10494: checking whether to build static libraries
> configure:10498: result: yes
> configure:10552: checking for inline
> configure:10568: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:10568: $? = 0
> configure:10576: result: inline
> configure:10610: checking for stdlib.h
> configure:10610: result: yes
> configure:10620: checking for GNU libc compatible malloc
> configure:10644: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10644: $? = 0
> configure:10644: ./conftest
> configure:10644: $? = 0
> configure:10654: result: yes
> configure:10678: checking for gettimeofday
> configure:10678: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10678: $? = 0
> configure:10678: result: yes
> configure:10678: checking for munmap
> configure:10678: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10678: $? = 0
> configure:10678: result: yes
> configure:10678: checking for socket
> configure:10678: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10678: $? = 0
> configure:10678: result: yes
> configure:10678: checking for strerror
> configure:10678: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10678: $? = 0
> configure:10678: result: yes
> configure:10678: checking for strtol
> configure:10678: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c >&5
> configure:10678: $? = 0
> configure:10678: result: yes
> configure:10696: checking urcu-bp.h usability
> configure:10696: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -c -Wall -I/home/zvivered/GNU/urcu/include conftest.c >&5
> configure:10696: $? = 0
> configure:10696: result: yes
> configure:10696: checking urcu-bp.h presence
> configure:10696: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp conftest.c
> conftest.c:32:21: error: urcu-bp.h: No such file or directory
> configure:10696: $? = 1
> configure: failed program was:
> | /* confdefs.h */
> | #define PACKAGE_NAME "ust"
> | #define PACKAGE_TARNAME "ust"
> | #define PACKAGE_VERSION "0.15"
> | #define PACKAGE_STRING "ust 0.15"
> | #define PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com"
> | #define PACKAGE_URL ""
> | #define PACKAGE "ust"
> | #define VERSION "0.15"
> | #define VERSION_MAJOR 0
> | #define VERSION_MINOR 15
> | #define STDC_HEADERS 1
> | #define HAVE_SYS_TYPES_H 1
> | #define HAVE_SYS_STAT_H 1
> | #define HAVE_STDLIB_H 1
> | #define HAVE_STRING_H 1
> | #define HAVE_MEMORY_H 1
> | #define HAVE_STRINGS_H 1
> | #define HAVE_INTTYPES_H 1
> | #define HAVE_STDINT_H 1
> | #define HAVE_UNISTD_H 1
> | #define HAVE_DLFCN_H 1
> | #define LT_OBJDIR ".libs/"
> | #define HAVE_STDLIB_H 1
> | #define HAVE_MALLOC 1
> | #define HAVE_GETTIMEOFDAY 1
> | #define HAVE_MUNMAP 1
> | #define HAVE_SOCKET 1
> | #define HAVE_STRERROR 1
> | #define HAVE_STRTOL 1
> | /* end confdefs.h. */
> | #include <urcu-bp.h>
> configure:10696: result: no
> configure:10696: WARNING: urcu-bp.h: accepted by the compiler, rejected by the preprocessor!
> configure:10696: WARNING: urcu-bp.h: proceeding with the compiler's result
> configure:10696: checking for urcu-bp.h
> configure:10696: result: yes
> configure:10711: checking for synchronize_rcu_bp in -lurcu-bp
> configure:10736: /home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc -o conftest -Wall -I/home/zvivered/GNU/urcu/include -L/home/zvivered/GNU/urcu/lib conftest.c -lurcu-bp >&5
> /home/zvivered/GNU/crosstool-1.5.0/release/lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/bin/ld: warning: liburcu-cds.so.1, needed by /home/zvivered/GNU/urcu/lib/liburcu-bp.so, not found (try using -rpath or -rpath-link)
> /home/zvivered/GNU/urcu/lib/liburcu-bp.so: undefined reference to `cds_wfq_enqueue'
> /home/zvivered/GNU/urcu/lib/liburcu-bp.so: undefined reference to `cds_wfq_init'
> /home/zvivered/GNU/urcu/lib/liburcu-bp.so: undefined reference to `cds_wfq_node_init'
> collect2: ld returned 1 exit status
> configure:10736: $? = 1
> configure: failed program was:
> | /* confdefs.h */
> | #define PACKAGE_NAME "ust"
> | #define PACKAGE_TARNAME "ust"
> | #define PACKAGE_VERSION "0.15"
> | #define PACKAGE_STRING "ust 0.15"
> | #define PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com"
> | #define PACKAGE_URL ""
> | #define PACKAGE "ust"
> | #define VERSION "0.15"
> | #define VERSION_MAJOR 0
> | #define VERSION_MINOR 15
> | #define STDC_HEADERS 1
> | #define HAVE_SYS_TYPES_H 1
> | #define HAVE_SYS_STAT_H 1
> | #define HAVE_STDLIB_H 1
> | #define HAVE_STRING_H 1
> | #define HAVE_MEMORY_H 1
> | #define HAVE_STRINGS_H 1
> | #define HAVE_INTTYPES_H 1
> | #define HAVE_STDINT_H 1
> | #define HAVE_UNISTD_H 1
> | #define HAVE_DLFCN_H 1
> | #define LT_OBJDIR ".libs/"
> | #define HAVE_STDLIB_H 1
> | #define HAVE_MALLOC 1
> | #define HAVE_GETTIMEOFDAY 1
> | #define HAVE_MUNMAP 1
> | #define HAVE_SOCKET 1
> | #define HAVE_STRERROR 1
> | #define HAVE_STRTOL 1
> | #define HAVE_URCU_BP_H 1
> | /* end confdefs.h. */
> |
> | /* Override any GCC internal prototype to avoid an error.
> | Use char because int might match the return type of a GCC
> | builtin and then its argument prototype would still apply. */
> | #ifdef __cplusplus
> | extern "C"
> | #endif
> | char synchronize_rcu_bp ();
> | int
> | main ()
> | {
> | return synchronize_rcu_bp ();
> | ;
> | return 0;
> | }
> configure:10745: result: no
> configure:10755: error: Cannot find liburcu-bp lib. Use LDFLAGS=-Ldir to specify its location.
>
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
>
> ac_cv_build=i686-pc-linux-gnu
> ac_cv_c_compiler_gnu=yes
> ac_cv_c_inline=inline
> ac_cv_env_CC_set=set
> ac_cv_env_CC_value=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> ac_cv_env_CFLAGS_set=set
> ac_cv_env_CFLAGS_value=-I/home/zvivered/GNU/urcu/include
> ac_cv_env_CPPFLAGS_set=
> ac_cv_env_CPPFLAGS_value=
> ac_cv_env_CPP_set=set
> ac_cv_env_CPP_value=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp
> ac_cv_env_LDFLAGS_set=set
> ac_cv_env_LDFLAGS_value=-L/home/zvivered/GNU/urcu/lib
> ac_cv_env_LIBS_set=
> ac_cv_env_LIBS_value=
> ac_cv_env_build_alias_set=
> ac_cv_env_build_alias_value=
> ac_cv_env_host_alias_set=
> ac_cv_env_host_alias_value=
> ac_cv_env_target_alias_set=
> ac_cv_env_target_alias_value=
> ac_cv_func_gettimeofday=yes
> ac_cv_func_malloc_0_nonnull=yes
> ac_cv_func_munmap=yes
> ac_cv_func_socket=yes
> ac_cv_func_strerror=yes
> ac_cv_func_strtol=yes
> ac_cv_header_dlfcn_h=yes
> ac_cv_header_inttypes_h=yes
> ac_cv_header_memory_h=yes
> ac_cv_header_stdc=yes
> ac_cv_header_stdint_h=yes
> ac_cv_header_stdlib_h=yes
> ac_cv_header_string_h=yes
> ac_cv_header_strings_h=yes
> ac_cv_header_sys_stat_h=yes
> ac_cv_header_sys_types_h=yes
> ac_cv_header_unistd_h=yes
> ac_cv_header_urcu_bp_h=yes
> ac_cv_host=i686-pc-linux-gnu
> ac_cv_lib_urcu_bp_synchronize_rcu_bp=no
> ac_cv_objext=o
> ac_cv_path_EGREP='/bin/grep -E'
> ac_cv_path_FGREP='/bin/grep -F'
> ac_cv_path_GREP=/bin/grep
> ac_cv_path_SED=/bin/sed
> ac_cv_path_install='/usr/bin/install -c'
> ac_cv_path_mkdir=/bin/mkdir
> ac_cv_prog_AWK=gawk
> ac_cv_prog_CPP=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp
> ac_cv_prog_ac_ct_AR=ar
> ac_cv_prog_ac_ct_CC=/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc
> ac_cv_prog_ac_ct_OBJDUMP=objdump
> ac_cv_prog_ac_ct_RANLIB=ranlib
> ac_cv_prog_ac_ct_STRIP=strip
> ac_cv_prog_cc_c89=
> ac_cv_prog_cc_g=yes
> ac_cv_prog_make_make_set=yes
> ac_cv_target=i686-pc-linux-gnu
> am_cv_CC_dependencies_compiler_type=gcc3
> lt_cv_deplibs_check_method=pass_all
> lt_cv_file_magic_cmd='$MAGIC_CMD'
> lt_cv_file_magic_test_file=
> lt_cv_ld_reload_flag=-r
> lt_cv_nm_interface='BSD nm'
> lt_cv_objdir=.libs
> lt_cv_path_LD=/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld
> lt_cv_path_NM='/usr/bin/nm -B'
> lt_cv_prog_compiler_c_o=yes
> lt_cv_prog_compiler_pic_works=yes
> lt_cv_prog_compiler_rtti_exceptions=no
> lt_cv_prog_compiler_static_works=yes
> lt_cv_prog_gnu_ld=yes
> lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
> lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'''
> lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\'''
> lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
> lt_cv_sys_max_cmd_len=98304
>
> ## ----------------- ##
> ## Output variables. ##
> ## ----------------- ##
>
> ACLOCAL='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run aclocal-1.11'
> AMDEPBACKSLASH='\'
> AMDEP_FALSE='#'
> AMDEP_TRUE=''
> AMTAR='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run tar'
> AM_BACKSLASH='\'
> AM_DEFAULT_VERBOSITY='0'
> AR='ar'
> AUTOCONF='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run autoconf'
> AUTOHEADER='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run autoheader'
> AUTOMAKE='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run automake-1.11'
> AWK='gawk'
> CC='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc'
> CCDEPMODE='depmode=gcc3'
> CFLAGS='-Wall -I/home/zvivered/GNU/urcu/include'
> CPP='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-cpp'
> CPPFLAGS=''
> CYGPATH_W='echo'
> DEFS=''
> DEPDIR='.deps'
> DSYMUTIL=''
> DUMPBIN=''
> ECHO_C=''
> ECHO_N='-n'
> ECHO_T=''
> EGREP='/bin/grep -E'
> EXEEXT=''
> FGREP='/bin/grep -F'
> GREP='/bin/grep'
> INSTALL_DATA='${INSTALL} -m 644'
> INSTALL_PROGRAM='${INSTALL}'
> INSTALL_SCRIPT='${INSTALL}'
> INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
> LD='/home/zvivered/GNU/crosstool-1.5.0/release/i686-nptl-linux-gnu/bin/ld'
> LDFLAGS='-L/home/zvivered/GNU/urcu/lib'
> LIBFORMAT=''
> LIBOBJS=''
> LIBS=''
> LIBTOOL='$(SHELL) $(top_builddir)/libtool'
> LIPO=''
> LN_S='ln -s'
> LTLIBOBJS=''
> MAJOR_VERSION='0'
> MAKEINFO='${SHELL} /home/zvivered/GNU/ust-0.15/config/missing --run makeinfo'
> MINOR_VERSION='15'
> MKDIR_P='/bin/mkdir -p'
> NM='/usr/bin/nm -B'
> NMEDIT=''
> OBJDUMP='objdump'
> OBJEXT='o'
> OTOOL64=''
> OTOOL=''
> PACKAGE='ust'
> PACKAGE_BUGREPORT='mathieu dot desnoyers at efficios dot com'
> PACKAGE_NAME='ust'
> PACKAGE_STRING='ust 0.15'
> PACKAGE_TARNAME='ust'
> PACKAGE_URL=''
> PACKAGE_VERSION='0.15'
> PATH_SEPARATOR=':'
> RANLIB='ranlib'
> SED='/bin/sed'
> SET_MAKE=''
> SHELL='/bin/sh'
> STRIP='strip'
> VERSION='0.15'
> ac_ct_CC='/home/zvivered/GNU/crosstool-1.5.0/release/bin/i686-nptl-linux-gnu-gcc'
> ac_ct_DUMPBIN=''
> am__EXEEXT_FALSE=''
> am__EXEEXT_TRUE=''
> am__fastdepCC_FALSE='#'
> am__fastdepCC_TRUE=''
> am__include='include'
> am__isrc=''
> am__leading_dot='.'
> am__quote=''
> am__tar='${AMTAR} chof - "$$tardir"'
> am__untar='${AMTAR} xf -'
> bindir='${exec_prefix}/bin'
> build='i686-pc-linux-gnu'
> build_alias=''
> build_cpu='i686'
> build_os='linux-gnu'
> build_vendor='pc'
> datadir='${datarootdir}'
> datarootdir='${prefix}/share'
> docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
> dvidir='${docdir}'
> exec_prefix='NONE'
> host='i686-pc-linux-gnu'
> host_alias=''
> host_cpu='i686'
> host_os='linux-gnu'
> host_vendor='pc'
> htmldir='${docdir}'
> includedir='${prefix}/include'
> infodir='${datarootdir}/info'
> install_sh='${SHELL} /home/zvivered/GNU/ust-0.15/config/install-sh'
> libdir='${exec_prefix}/lib'
> libexecdir='${exec_prefix}/libexec'
> localedir='${datarootdir}/locale'
> localstatedir='${prefix}/var'
> lt_ECHO='echo'
> mandir='${datarootdir}/man'
> mkdir_p='/bin/mkdir -p'
> oldincludedir='/usr/include'
> pdfdir='${docdir}'
> prefix='/home/zvivered/GNU/ust'
> program_transform_name='s,x,x,'
> psdir='${docdir}'
> sbindir='${exec_prefix}/sbin'
> sharedstatedir='${prefix}/com'
> sysconfdir='${prefix}/etc'
> target='i686-pc-linux-gnu'
> target_alias=''
> target_cpu='i686'
> target_os='linux-gnu'
> target_vendor='pc'
>
> ## ----------- ##
> ## confdefs.h. ##
> ## ----------- ##
>
> /* confdefs.h */
> #define PACKAGE_NAME "ust"
> #define PACKAGE_TARNAME "ust"
> #define PACKAGE_VERSION "0.15"
> #define PACKAGE_STRING "ust 0.15"
> #define PACKAGE_BUGREPORT "mathieu dot desnoyers at efficios dot com"
> #define PACKAGE_URL ""
> #define PACKAGE "ust"
> #define VERSION "0.15"
> #define VERSION_MAJOR 0
> #define VERSION_MINOR 15
> #define STDC_HEADERS 1
> #define HAVE_SYS_TYPES_H 1
> #define HAVE_SYS_STAT_H 1
> #define HAVE_STDLIB_H 1
> #define HAVE_STRING_H 1
> #define HAVE_MEMORY_H 1
> #define HAVE_STRINGS_H 1
> #define HAVE_INTTYPES_H 1
> #define HAVE_STDINT_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_DLFCN_H 1
> #define LT_OBJDIR ".libs/"
> #define HAVE_STDLIB_H 1
> #define HAVE_MALLOC 1
> #define HAVE_GETTIMEOFDAY 1
> #define HAVE_MUNMAP 1
> #define HAVE_SOCKET 1
> #define HAVE_STRERROR 1
> #define HAVE_STRTOL 1
> #define HAVE_URCU_BP_H 1
>
> configure: exit 1
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
More information about the lttng-dev
mailing list