[ltt-dev] [PATCH RFC urcu 2/4] Map symbols to allow multiple RCU flavors to be used in one binary

Mathieu Desnoyers compudj at krystal.dyndns.org
Wed Apr 13 17:24:49 EDT 2011


* Paul E. McKenney (paulmck at linux.vnet.ibm.com) wrote:
> Probably need similar mapping for rcu_defer().  Definitely need
> backwards-compatibility mapping for programs compiled against
> old versions of the library.

Either that or we bump the version to 0.6.x ? Otherwise, we'll have to
keep tons of .so around just to do the compatibility layer for older
linking behavior.

Thoughts ?

Mathieu

> 
> Signed-off-by: Paul E. McKenney <paulmck at linux.vnet.ibm.com>
> ---
>  Makefile.am          |    3 +-
>  tests/Makefile.am    |   33 ++--
>  tests/rcutorture.h   |    1 -
>  tests/urcutorture.c  |   13 +-
>  urcu-bp-map.h        |   61 +++++
>  urcu-bp.c            |    4 +
>  urcu-bp.h            |    8 +-
>  urcu-call-rcu-impl.h |  618 +++++++++++++++++++++++++++++++++++++++++++++++++
>  urcu-call-rcu.c      |  620 --------------------------------------------------
>  urcu-map.h           |  117 ++++++++++
>  urcu-qsbr-map.h      |   63 +++++
>  urcu-qsbr.c          |   36 ++--
>  urcu-qsbr.h          |   18 +-
>  urcu.c               |    5 +
>  urcu.h               |   20 ++-
>  15 files changed, 945 insertions(+), 675 deletions(-)
>  create mode 100644 urcu-bp-map.h
>  create mode 100644 urcu-call-rcu-impl.h
>  delete mode 100644 urcu-call-rcu.c
>  create mode 100644 urcu-map.h
>  create mode 100644 urcu-qsbr-map.h
> 
> diff --git a/Makefile.am b/Makefile.am
> index 7956e7e..ef3bfef 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -30,7 +30,7 @@ COMPAT+=compat_futex.c
>  endif
>  
>  lib_LTLIBRARIES = liburcu.la liburcu-qsbr.la liburcu-mb.la liburcu-signal.la \
> -		  liburcu-bp.la liburcu-defer.la liburcu-call.la \
> +		  liburcu-bp.la liburcu-defer.la \
>  		  libwfqueue.la libwfstack.la librculfqueue.la librculfstack.la
>  
>  liburcu_la_SOURCES = urcu.c urcu-pointer.c $(COMPAT)
> @@ -45,7 +45,6 @@ liburcu_signal_la_CFLAGS = -DRCU_SIGNAL
>  
>  liburcu_bp_la_SOURCES = urcu-bp.c urcu-pointer.c $(COMPAT)
>  
> -liburcu_call_la_SOURCES = urcu-call-rcu.c $(COMPAT)
>  liburcu_defer_la_SOURCES = urcu-defer.c $(COMPAT)
>  
>  libwfqueue_la_SOURCES = wfqueue.c $(COMPAT)
> diff --git a/tests/Makefile.am b/tests/Makefile.am
> index 3c025a4..8dacb11 100644
> --- a/tests/Makefile.am
> +++ b/tests/Makefile.am
> @@ -28,21 +28,20 @@ if COMPAT_FUTEX
>  COMPAT+=$(top_srcdir)/compat_futex.c
>  endif
>  
> -URCU=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> -URCU_QSBR=$(top_srcdir)/urcu-qsbr.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU_QSBR=$(top_srcdir)/urcu-qsbr.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
>  # URCU_MB uses urcu.c but -DRCU_MB must be defined
> -URCU_MB=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU_MB=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
>  # URCU_SIGNAL uses urcu.c but -DRCU_SIGNAL must be defined
> -URCU_SIGNAL=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> -URCU_BP=$(top_srcdir)/urcu-bp.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> -URCU_DEFER=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-defer.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/urcu-call-rcu.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU_SIGNAL=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU_BP=$(top_srcdir)/urcu-bp.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
> +URCU_DEFER=$(top_srcdir)/urcu.c $(top_srcdir)/urcu-defer.c $(top_srcdir)/urcu-pointer.c $(top_srcdir)/wfqueue.c $(COMPAT)
>  
>  URCU_LIB=$(top_builddir)/liburcu.la
>  URCU_QSBR_LIB=$(top_builddir)/liburcu-qsbr.la
>  URCU_MB_LIB=$(top_builddir)/liburcu-mb.la
>  URCU_SIGNAL_LIB=$(top_builddir)/liburcu-signal.la
>  URCU_BP_LIB=$(top_builddir)/liburcu-bp.la
> -URCU_CALL_LIB=$(top_builddir)/liburcu-call.la
>  WFQUEUE_LIB=$(top_builddir)/libwfqueue.la
>  WFSTACK_LIB=$(top_builddir)/libwfstack.la
>  RCULFQUEUE_LIB=$(top_builddir)/librculfqueue.la
> @@ -95,24 +94,24 @@ test_perthreadlock_SOURCES = test_perthreadlock.c $(URCU_SIGNAL)
>  
>  
>  rcutorture_urcu_SOURCES = urcutorture.c
> -rcutorture_urcu_CFLAGS = -DTORTURE_URCU $(AM_CFLAGS)
> -rcutorture_urcu_LDADD = $(URCU) $(URCU_CALL_LIB) $(WFQUEUE_LIB)
> +rcutorture_urcu_CFLAGS = -DRCU_MEMBARRIER $(AM_CFLAGS)
> +rcutorture_urcu_LDADD = $(URCU) $(WFQUEUE_LIB)
>  
>  rcutorture_urcu_mb_SOURCES = urcutorture.c
> -rcutorture_urcu_mb_CFLAGS = -DTORTURE_URCU_MB $(AM_CFLAGS)
> -rcutorture_urcu_mb_LDADD = $(URCU_MB_LIB) $(URCU_CALL_LIB) $(WFQUEUE_LIB)
> +rcutorture_urcu_mb_CFLAGS = -DRCU_MB $(AM_CFLAGS)
> +rcutorture_urcu_mb_LDADD = $(URCU_MB_LIB) $(WFQUEUE_LIB)
>  
>  rcutorture_qsbr_SOURCES = urcutorture.c
> -rcutorture_qsbr_CFLAGS = -DTORTURE_QSBR $(AM_CFLAGS)
> -rcutorture_qsbr_LDADD = $(URCU_QSBR_LIB) $(URCU_CALL_LIB) $(WFQUEUE_LIB)
> +rcutorture_qsbr_CFLAGS = -DRCU_QSBR $(AM_CFLAGS)
> +rcutorture_qsbr_LDADD = $(URCU_QSBR_LIB) $(WFQUEUE_LIB)
>  
>  rcutorture_urcu_signal_SOURCES = urcutorture.c
> -rcutorture_urcu_signal_CFLAGS = -DTORTURE_URCU_SIGNAL $(AM_CFLAGS)
> -rcutorture_urcu_signal_LDADD = $(URCU_SIGNAL_LIB) $(URCU_CALL_LIB) $(WFQUEUE_LIB)
> +rcutorture_urcu_signal_CFLAGS = -DRCU_SIGNAL $(AM_CFLAGS)
> +rcutorture_urcu_signal_LDADD = $(URCU_SIGNAL_LIB) $(WFQUEUE_LIB)
>  
>  rcutorture_urcu_bp_SOURCES = urcutorture.c
> -rcutorture_urcu_bp_CFLAGS = -DTORTURE_URCU_BP $(AM_CFLAGS)
> -rcutorture_urcu_bp_LDADD = $(URCU_BP_LIB) $(URCU_CALL_LIB) $(WFQUEUE_LIB)
> +rcutorture_urcu_bp_CFLAGS = -DRCU_BP $(AM_CFLAGS)
> +rcutorture_urcu_bp_LDADD = $(URCU_BP_LIB) $(WFQUEUE_LIB)
>  
>  test_mutex_SOURCES = test_mutex.c $(URCU)
>  
> diff --git a/tests/rcutorture.h b/tests/rcutorture.h
> index 66fdd7f..aba74b0 100644
> --- a/tests/rcutorture.h
> +++ b/tests/rcutorture.h
> @@ -66,7 +66,6 @@
>   */
>  
>  #include <stdlib.h>
> -#include "../urcu-call-rcu.h"
>  
>  DEFINE_PER_THREAD(long long, n_reads_pt);
>  DEFINE_PER_THREAD(long long, n_updates_pt);
> diff --git a/tests/urcutorture.c b/tests/urcutorture.c
> index 63fa386..a098d87 100644
> --- a/tests/urcutorture.c
> +++ b/tests/urcutorture.c
> @@ -8,22 +8,19 @@
>  #include "api.h"
>  #define _LGPL_SOURCE
>  
> -#ifdef TORTURE_RCU_MEMBARRIER
> -#define RCU_MEMBARRIER
> +#ifdef RCU_MEMBARRIER
>  #include <urcu.h>
>  #endif
> -#ifdef TORTURE_URCU_SIGNAL
> -#define RCU_SIGNAL
> +#ifdef RCU_SIGNAL
>  #include <urcu.h>
>  #endif
> -#ifdef TORTURE_URCU_MB
> -#define RCU_MB
> +#ifdef RCU_MB
>  #include <urcu.h>
>  #endif
> -#ifdef TORTURE_QSBR
> +#ifdef RCU_QSBR
>  #include <urcu-qsbr.h>
>  #endif
> -#ifdef TORTURE_URCU_BP
> +#ifdef RCU_BP
>  #include <urcu-bp.h>
>  #endif
>  
> diff --git a/urcu-bp-map.h b/urcu-bp-map.h
> new file mode 100644
> index 0000000..6321802
> --- /dev/null
> +++ b/urcu-bp-map.h
> @@ -0,0 +1,61 @@
> +#ifndef _URCU_BP_MAP_H
> +#define _URCU_BP_MAP_H
> +
> +/*
> + * urcu-map.h
> + *
> + * Userspace RCU header -- name mapping to allow multiple flavors to be
> + * used in the same executable.
> + *
> + * Copyright (c) 2009 Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> + * Copyright (c) 2009 Paul E. McKenney, IBM Corporation.
> + *
> + * LGPL-compatible code should include this header with :
> + *
> + * #define _LGPL_SOURCE
> + * #include <urcu.h>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + * IBM's contributions to this file may be relicensed under LGPLv2 or later.
> + */
> +
> +/* Mapping macros to allow multiple flavors in a single binary. */
> +
> +#define rcu_read_lock			rcu_read_lock_bp
> +#define _rcu_read_lock			_rcu_read_lock_bp
> +#define rcu_read_unlock			rcu_read_unlock_bp
> +#define _rcu_read_unlock		_rcu_read_unlock_bp
> +#define rcu_register_thread		rcu_register_thread_bp
> +#define rcu_unregister_thread		rcu_unregister_thread_bp
> +#define rcu_init			rcu_init_bp
> +#define rcu_exit			rcu_exit_bp
> +#define synchronize_rcu			synchronize_rcu_bp
> +#define rcu_reader			rcu_reader_bp
> +#define rcu_gp_ctr			rcu_gp_ctr_bp
> +
> +#define get_cpu_call_rcu_data		get_cpu_call_rcu_data_bp
> +#define get_call_rcu_thread		get_call_rcu_thread_bp
> +#define create_call_rcu_data		create_call_rcu_data_bp
> +#define set_cpu_call_rcu_data		set_cpu_call_rcu_data_bp
> +#define get_default_call_rcu_data	get_default_call_rcu_data_bp
> +#define get_call_rcu_data		get_call_rcu_data_bp
> +#define get_thread_call_rcu_data	get_thread_call_rcu_data_bp
> +#define set_thread_call_rcu_data	set_thread_call_rcu_data_bp
> +#define create_all_cpu_call_rcu_data	create_all_cpu_call_rcu_data_bp
> +#define free_all_cpu_call_rcu_data	free_all_cpu_call_rcu_data_bp
> +#define call_rcu			call_rcu_bp
> +
> +#endif /* _URCU_BP_MAP_H */
> diff --git a/urcu-bp.c b/urcu-bp.c
> index 04bb675..5474f9f 100644
> --- a/urcu-bp.c
> +++ b/urcu-bp.c
> @@ -35,6 +35,8 @@
>  #include <unistd.h>
>  #include <sys/mman.h>
>  
> +#include "urcu-bp-map.h"
> +
>  #include "urcu-bp-static.h"
>  /* Do not #define _LGPL_SOURCE to ensure we can emit the wrapper symbols */
>  #include "urcu-bp.h"
> @@ -375,3 +377,5 @@ void rcu_bp_after_fork_child(void)
>  	ret = pthread_sigmask(SIG_SETMASK, &oldmask, NULL);
>  	assert(!ret);
>  }
> +
> +#include "urcu-call-rcu-impl.h"
> diff --git a/urcu-bp.h b/urcu-bp.h
> index d92fbd1..fdf885c 100644
> --- a/urcu-bp.h
> +++ b/urcu-bp.h
> @@ -46,6 +46,8 @@
>  extern "C" {
>  #endif
>  
> +#include "urcu-bp-map.h"
> +
>  /*
>   * Important !
>   *
> @@ -69,8 +71,8 @@ extern "C" {
>   *
>   * Mark the beginning and end of a read-side critical section.
>   */
> -#define rcu_read_lock()		_rcu_read_lock()
> -#define rcu_read_unlock()	_rcu_read_unlock()
> +#define rcu_read_lock_bp()		_rcu_read_lock()
> +#define rcu_read_unlock_bp()		_rcu_read_unlock()
>  
>  #else /* !_LGPL_SOURCE */
>  
> @@ -115,4 +117,6 @@ static inline void rcu_init(void)
>  }
>  #endif
>  
> +#include "urcu-call-rcu.h"
> +
>  #endif /* _URCU_BP_H */
> diff --git a/urcu-call-rcu-impl.h b/urcu-call-rcu-impl.h
> new file mode 100644
> index 0000000..68dbbdd
> --- /dev/null
> +++ b/urcu-call-rcu-impl.h
> @@ -0,0 +1,618 @@
> +/*
> + * urcu-call-rcu.c
> + *
> + * Userspace RCU library - batch memory reclamation with kernel API
> + *
> + * Copyright (c) 2010 Paul E. McKenney <paulmck at linux.vnet.ibm.com>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include <stdio.h>
> +#include <pthread.h>
> +#include <signal.h>
> +#include <assert.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <errno.h>
> +#include <poll.h>
> +#include <sys/time.h>
> +#include <syscall.h>
> +#include <unistd.h>
> +
> +#include "config.h"
> +#include "urcu/wfqueue.h"
> +#include "urcu-call-rcu.h"
> +#include "urcu-pointer.h"
> +#include "urcu/list.h"
> +
> +/* Data structure that identifies a call_rcu thread. */
> +
> +struct call_rcu_data {
> +	struct cds_wfq_queue cbs;
> +	unsigned long flags;
> +	pthread_mutex_t mtx;
> +	pthread_cond_t cond;
> +	unsigned long qlen;
> +	pthread_t tid;
> +	struct cds_list_head list;
> +} __attribute__((aligned(CAA_CACHE_LINE_SIZE)));
> +
> +/*
> + * List of all call_rcu_data structures to keep valgrind happy.
> + * Protected by call_rcu_mutex.
> + */
> +
> +CDS_LIST_HEAD(call_rcu_data_list);
> +
> +/* Link a thread using call_rcu() to its call_rcu thread. */
> +
> +static __thread struct call_rcu_data *thread_call_rcu_data;
> +
> +/* Guard call_rcu thread creation. */
> +
> +static pthread_mutex_t call_rcu_mutex = PTHREAD_MUTEX_INITIALIZER;
> +
> +/* If a given thread does not have its own call_rcu thread, this is default. */
> +
> +static struct call_rcu_data *default_call_rcu_data;
> +
> +/*
> + * If the sched_getcpu() and sysconf(_SC_NPROCESSORS_CONF) calls are
> + * available, then we can have call_rcu threads assigned to individual
> + * CPUs rather than only to specific threads.
> + */
> +
> +#if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF)
> +
> +/*
> + * Pointer to array of pointers to per-CPU call_rcu_data structures
> + * and # CPUs.
> + */
> +
> +static struct call_rcu_data **per_cpu_call_rcu_data;
> +static long maxcpus;
> +
> +/* Allocate the array if it has not already been allocated. */
> +
> +static void alloc_cpu_call_rcu_data(void)
> +{
> +	struct call_rcu_data **p;
> +	static int warned = 0;
> +
> +	if (maxcpus != 0)
> +		return;
> +	maxcpus = sysconf(_SC_NPROCESSORS_CONF);
> +	if (maxcpus <= 0) {
> +		return;
> +	}
> +	p = malloc(maxcpus * sizeof(*per_cpu_call_rcu_data));
> +	if (p != NULL) {
> +		memset(p, '\0', maxcpus * sizeof(*per_cpu_call_rcu_data));
> +		per_cpu_call_rcu_data = p;
> +	} else {
> +		if (!warned) {
> +			fprintf(stderr, "[error] liburcu: unable to allocate per-CPU pointer array\n");
> +		}
> +		warned = 1;
> +	}
> +}
> +
> +#else /* #if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF) */
> +
> +static const struct call_rcu_data **per_cpu_call_rcu_data = NULL;
> +static const long maxcpus = -1;
> +
> +static void alloc_cpu_call_rcu_data(void)
> +{
> +}
> +
> +static int sched_getcpu(void)
> +{
> +	return -1;
> +}
> +
> +#endif /* #else #if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF) */
> +
> +/* Acquire the specified pthread mutex. */
> +
> +static void call_rcu_lock(pthread_mutex_t *pmp)
> +{
> +	if (pthread_mutex_lock(pmp) != 0) {
> +		perror("pthread_mutex_lock");
> +		exit(-1);
> +	}
> +}
> +
> +/* Release the specified pthread mutex. */
> +
> +static void call_rcu_unlock(pthread_mutex_t *pmp)
> +{
> +	if (pthread_mutex_unlock(pmp) != 0) {
> +		perror("pthread_mutex_unlock");
> +		exit(-1);
> +	}
> +}
> +
> +/* This is the code run by each call_rcu thread. */
> +
> +static void *call_rcu_thread(void *arg)
> +{
> +	unsigned long cbcount;
> +	struct cds_wfq_node *cbs;
> +	struct cds_wfq_node **cbs_tail;
> +	struct call_rcu_data *crdp = (struct call_rcu_data *)arg;
> +	struct rcu_head *rhp;
> +
> +	thread_call_rcu_data = crdp;
> +	for (;;) {
> +		if (&crdp->cbs.head != _CMM_LOAD_SHARED(crdp->cbs.tail)) {
> +			while ((cbs = _CMM_LOAD_SHARED(crdp->cbs.head)) == NULL)
> +				poll(NULL, 0, 1);
> +			_CMM_STORE_SHARED(crdp->cbs.head, NULL);
> +			cbs_tail = (struct cds_wfq_node **)
> +				uatomic_xchg(&crdp->cbs.tail, &crdp->cbs.head);
> +			synchronize_rcu();
> +			cbcount = 0;
> +			do {
> +				while (cbs->next == NULL &&
> +				       &cbs->next != cbs_tail)
> +				       	poll(NULL, 0, 1);
> +				if (cbs == &crdp->cbs.dummy) {
> +					cbs = cbs->next;
> +					continue;
> +				}
> +				rhp = (struct rcu_head *)cbs;
> +				cbs = cbs->next;
> +				rhp->func(rhp);
> +				cbcount++;
> +			} while (cbs != NULL);
> +			uatomic_sub(&crdp->qlen, cbcount);
> +		}
> +		if (crdp->flags & URCU_CALL_RCU_STOP)
> +			break;
> +		if (crdp->flags & URCU_CALL_RCU_RT)
> +			poll(NULL, 0, 10);
> +		else {
> +			call_rcu_lock(&crdp->mtx);
> +			_CMM_STORE_SHARED(crdp->flags,
> +				     crdp->flags & ~URCU_CALL_RCU_RUNNING);
> +			if (&crdp->cbs.head ==
> +			    _CMM_LOAD_SHARED(crdp->cbs.tail) &&
> +			    pthread_cond_wait(&crdp->cond, &crdp->mtx) != 0) {
> +				perror("pthread_cond_wait");
> +				exit(-1);
> +			}
> +			_CMM_STORE_SHARED(crdp->flags,
> +				     crdp->flags | URCU_CALL_RCU_RUNNING);
> +			poll(NULL, 0, 10);
> +			call_rcu_unlock(&crdp->mtx);
> +		}
> +	}
> +	call_rcu_lock(&crdp->mtx);
> +	crdp->flags |= URCU_CALL_RCU_STOPPED;
> +	call_rcu_unlock(&crdp->mtx);
> +	return NULL;
> +}
> +
> +/*
> + * Create both a call_rcu thread and the corresponding call_rcu_data
> + * structure, linking the structure in as specified.  Caller must hold
> + * call_rcu_mutex.
> + */
> +
> +static void call_rcu_data_init(struct call_rcu_data **crdpp,
> +			       unsigned long flags)
> +{
> +	struct call_rcu_data *crdp;
> +
> +	crdp = malloc(sizeof(*crdp));
> +	if (crdp == NULL) {
> +		fprintf(stderr, "Out of memory.\n");
> +		exit(-1);
> +	}
> +	memset(crdp, '\0', sizeof(*crdp));
> +	cds_wfq_init(&crdp->cbs);
> +	crdp->qlen = 0;
> +	if (pthread_mutex_init(&crdp->mtx, NULL) != 0) {
> +		perror("pthread_mutex_init");
> +		exit(-1);
> +	}
> +	if (pthread_cond_init(&crdp->cond, NULL) != 0) {
> +		perror("pthread_cond_init");
> +		exit(-1);
> +	}
> +	crdp->flags = flags | URCU_CALL_RCU_RUNNING;
> +	cds_list_add(&crdp->list, &call_rcu_data_list);
> +	cmm_smp_mb();  /* Structure initialized before pointer is planted. */
> +	*crdpp = crdp;
> +	if (pthread_create(&crdp->tid, NULL, call_rcu_thread, crdp) != 0) {
> +		perror("pthread_create");
> +		exit(-1);
> +	}
> +}
> +
> +/*
> + * Return a pointer to the call_rcu_data structure for the specified
> + * CPU, returning NULL if there is none.  We cannot automatically
> + * created it because the platform we are running on might not define
> + * sched_getcpu().
> + */
> +
> +struct call_rcu_data *get_cpu_call_rcu_data(int cpu)
> +{
> +	static int warned = 0;
> +
> +	if (per_cpu_call_rcu_data == NULL)
> +		return NULL;
> +	if (!warned && maxcpus > 0 && (cpu < 0 || maxcpus <= cpu)) {
> +		fprintf(stderr, "[error] liburcu: get CPU # out of range\n");
> +		warned = 1;
> +	}
> +	if (cpu < 0 || maxcpus <= cpu)
> +		return NULL;
> +	return per_cpu_call_rcu_data[cpu];
> +}
> +
> +/*
> + * Return the tid corresponding to the call_rcu thread whose
> + * call_rcu_data structure is specified.
> + */
> +
> +pthread_t get_call_rcu_thread(struct call_rcu_data *crdp)
> +{
> +	return crdp->tid;
> +}
> +
> +/*
> + * Create a call_rcu_data structure (with thread) and return a pointer.
> + */
> +
> +static struct call_rcu_data *__create_call_rcu_data(unsigned long flags)
> +{
> +	struct call_rcu_data *crdp;
> +
> +	call_rcu_data_init(&crdp, flags);
> +	return crdp;
> +}
> +
> +struct call_rcu_data *create_call_rcu_data(unsigned long flags)
> +{
> +	struct call_rcu_data *crdp;
> +
> +	call_rcu_lock(&call_rcu_mutex);
> +	crdp = __create_call_rcu_data(flags);
> +	call_rcu_unlock(&call_rcu_mutex);
> +	return crdp;
> +}
> +
> +/*
> + * Set the specified CPU to use the specified call_rcu_data structure.
> + *
> + * Use NULL to remove a CPU's call_rcu_data structure, but it is
> + * the caller's responsibility to dispose of the removed structure.
> + * Use get_cpu_call_rcu_data() to obtain a pointer to the old structure
> + * (prior to NULLing it out, of course).
> + */
> +
> +int set_cpu_call_rcu_data(int cpu, struct call_rcu_data *crdp)
> +{
> +	int warned = 0;
> +
> +	call_rcu_lock(&call_rcu_mutex);
> +	if (cpu < 0 || maxcpus <= cpu) {
> +		if (!warned) {
> +			fprintf(stderr, "[error] liburcu: set CPU # out of range\n");
> +			warned = 1;
> +		}
> +		call_rcu_unlock(&call_rcu_mutex);
> +		errno = EINVAL;
> +		return -EINVAL;
> +	}
> +	alloc_cpu_call_rcu_data();
> +	call_rcu_unlock(&call_rcu_mutex);
> +	if (per_cpu_call_rcu_data == NULL) {
> +		errno = ENOMEM;
> +		return -ENOMEM;
> +	}
> +	per_cpu_call_rcu_data[cpu] = crdp;
> +	return 0;
> +}
> +
> +/*
> + * Return a pointer to the default call_rcu_data structure, creating
> + * one if need be.  Because we never free call_rcu_data structures,
> + * we don't need to be in an RCU read-side critical section.
> + */
> +
> +struct call_rcu_data *get_default_call_rcu_data(void)
> +{
> +	if (default_call_rcu_data != NULL)
> +		return rcu_dereference(default_call_rcu_data);
> +	call_rcu_lock(&call_rcu_mutex);
> +	if (default_call_rcu_data != NULL) {
> +		call_rcu_unlock(&call_rcu_mutex);
> +		return default_call_rcu_data;
> +	}
> +	call_rcu_data_init(&default_call_rcu_data, 0);
> +	call_rcu_unlock(&call_rcu_mutex);
> +	return default_call_rcu_data;
> +}
> +
> +/*
> + * Return the call_rcu_data structure that applies to the currently
> + * running thread.  Any call_rcu_data structure assigned specifically
> + * to this thread has first priority, followed by any call_rcu_data
> + * structure assigned to the CPU on which the thread is running,
> + * followed by the default call_rcu_data structure.  If there is not
> + * yet a default call_rcu_data structure, one will be created.
> + */
> +struct call_rcu_data *get_call_rcu_data(void)
> +{
> +	int curcpu;
> +	static int warned = 0;
> +
> +	if (thread_call_rcu_data != NULL)
> +		return thread_call_rcu_data;
> +	if (maxcpus <= 0)
> +		return get_default_call_rcu_data();
> +	curcpu = sched_getcpu();
> +	if (!warned && (curcpu < 0 || maxcpus <= curcpu)) {
> +		fprintf(stderr, "[error] liburcu: gcrd CPU # out of range\n");
> +		warned = 1;
> +	}
> +	if (curcpu >= 0 && maxcpus > curcpu &&
> +	    per_cpu_call_rcu_data != NULL &&
> +	    per_cpu_call_rcu_data[curcpu] != NULL)
> +	    	return per_cpu_call_rcu_data[curcpu];
> +	return get_default_call_rcu_data();
> +}
> +
> +/*
> + * Return a pointer to this task's call_rcu_data if there is one.
> + */
> +
> +struct call_rcu_data *get_thread_call_rcu_data(void)
> +{
> +	return thread_call_rcu_data;
> +}
> +
> +/*
> + * Set this task's call_rcu_data structure as specified, regardless
> + * of whether or not this task already had one.  (This allows switching
> + * to and from real-time call_rcu threads, for example.)
> + *
> + * Use NULL to remove a thread's call_rcu_data structure, but it is
> + * the caller's responsibility to dispose of the removed structure.
> + * Use get_thread_call_rcu_data() to obtain a pointer to the old structure
> + * (prior to NULLing it out, of course).
> + */
> +
> +void set_thread_call_rcu_data(struct call_rcu_data *crdp)
> +{
> +	thread_call_rcu_data = crdp;
> +}
> +
> +/*
> + * Create a separate call_rcu thread for each CPU.  This does not
> + * replace a pre-existing call_rcu thread -- use the set_cpu_call_rcu_data()
> + * function if you want that behavior.
> + */
> +
> +int create_all_cpu_call_rcu_data(unsigned long flags)
> +{
> +	int i;
> +	struct call_rcu_data *crdp;
> +	int ret;
> +
> +	call_rcu_lock(&call_rcu_mutex);
> +	alloc_cpu_call_rcu_data();
> +	call_rcu_unlock(&call_rcu_mutex);
> +	if (maxcpus <= 0) {
> +		errno = EINVAL;
> +		return -EINVAL;
> +	}
> +	if (per_cpu_call_rcu_data == NULL) {
> +		errno = ENOMEM;
> +		return -ENOMEM;
> +	}
> +	for (i = 0; i < maxcpus; i++) {
> +		call_rcu_lock(&call_rcu_mutex);
> +		if (get_cpu_call_rcu_data(i)) {
> +			call_rcu_unlock(&call_rcu_mutex);
> +			continue;
> +		}
> +		crdp = __create_call_rcu_data(flags);
> +		if (crdp == NULL) {
> +			call_rcu_unlock(&call_rcu_mutex);
> +			errno = ENOMEM;
> +			return -ENOMEM;
> +		}
> +		call_rcu_unlock(&call_rcu_mutex);
> +		if ((ret = set_cpu_call_rcu_data(i, crdp)) != 0) {
> +			/* FIXME: Leaks crdp for now. */
> +			return ret; /* Can happen on race. */
> +		}
> +	}
> +	return 0;
> +}
> +
> +/*
> + * Wake up the call_rcu thread corresponding to the specified
> + * call_rcu_data structure.
> + */
> +static void wake_call_rcu_thread(struct call_rcu_data *crdp)
> +{
> +	if (!(_CMM_LOAD_SHARED(crdp->flags) & URCU_CALL_RCU_RT)) {
> +		call_rcu_lock(&crdp->mtx);
> +		if (!(_CMM_LOAD_SHARED(crdp->flags) & URCU_CALL_RCU_RUNNING)) {
> +			if (pthread_cond_signal(&crdp->cond) != 0) {
> +				perror("pthread_cond_signal");
> +				exit(-1);
> +			}
> +		}
> +		call_rcu_unlock(&crdp->mtx);
> +	}
> +}
> +
> +/*
> + * Schedule a function to be invoked after a following grace period.
> + * This is the only function that must be called -- the others are
> + * only present to allow applications to tune their use of RCU for
> + * maximum performance.
> + *
> + * Note that unless a call_rcu thread has not already been created,
> + * the first invocation of call_rcu() will create one.  So, if you
> + * need the first invocation of call_rcu() to be fast, make sure
> + * to create a call_rcu thread first.  One way to accomplish this is
> + * "get_call_rcu_data();", and another is create_all_cpu_call_rcu_data().
> + */
> +
> +void call_rcu(struct rcu_head *head,
> +	      void (*func)(struct rcu_head *head))
> +{
> +	struct call_rcu_data *crdp;
> +
> +	cds_wfq_node_init(&head->next);
> +	head->func = func;
> +	crdp = get_call_rcu_data();
> +	cds_wfq_enqueue(&crdp->cbs, &head->next);
> +	uatomic_inc(&crdp->qlen);
> +	wake_call_rcu_thread(crdp);
> +}
> +
> +/*
> + * Free up the specified call_rcu_data structure, terminating the
> + * associated call_rcu thread.  The caller must have previously
> + * removed the call_rcu_data structure from per-thread or per-CPU
> + * usage.  For example, set_cpu_call_rcu_data(cpu, NULL) for per-CPU
> + * call_rcu_data structures or set_thread_call_rcu_data(NULL) for
> + * per-thread call_rcu_data structures.
> + *
> + * We silently refuse to free up the default call_rcu_data structure
> + * because that is where we put any leftover callbacks.  Note that
> + * the possibility of self-spawning callbacks makes it impossible
> + * to execute all the callbacks in finite time without putting any
> + * newly spawned callbacks somewhere else.  The "somewhere else" of
> + * last resort is the default call_rcu_data structure.
> + *
> + * We also silently refuse to free NULL pointers.  This simplifies
> + * the calling code.
> + */
> +void call_rcu_data_free(struct call_rcu_data *crdp)
> +{
> +	struct cds_wfq_node *cbs;
> +	struct cds_wfq_node **cbs_tail;
> +	struct cds_wfq_node **cbs_endprev;
> +
> +	if (crdp == NULL || crdp == default_call_rcu_data) {
> +		return;
> +	}
> +	if ((crdp->flags & URCU_CALL_RCU_STOPPED) == 0) {
> +		call_rcu_lock(&crdp->mtx);
> +		crdp->flags |= URCU_CALL_RCU_STOP;
> +		call_rcu_unlock(&crdp->mtx);
> +		wake_call_rcu_thread(crdp);
> +		while ((crdp->flags & URCU_CALL_RCU_STOPPED) == 0)
> +			poll(NULL, 0, 1);
> +	}
> +	if (&crdp->cbs.head != _CMM_LOAD_SHARED(crdp->cbs.tail)) {
> +		while ((cbs = _CMM_LOAD_SHARED(crdp->cbs.head)) == NULL)
> +			poll(NULL, 0, 1);
> +		_CMM_STORE_SHARED(crdp->cbs.head, NULL);
> +		cbs_tail = (struct cds_wfq_node **)
> +			uatomic_xchg(&crdp->cbs.tail, &crdp->cbs.head);
> +		cbs_endprev = (struct cds_wfq_node **)
> +			uatomic_xchg(&default_call_rcu_data, cbs_tail);
> +		*cbs_endprev = cbs;
> +		uatomic_add(&default_call_rcu_data->qlen,
> +			    uatomic_read(&crdp->qlen));
> +		cds_list_del(&crdp->list);
> +		free(crdp);
> +	}
> +}
> +
> +/*
> + * Clean up all the per-CPU call_rcu threads.
> + */
> +void free_all_cpu_call_rcu_data(void)
> +{
> +	int cpu;
> +	struct call_rcu_data *crdp;
> +
> +	if (maxcpus <= 0)
> +		return;
> +	for (cpu = 0; cpu < maxcpus; cpu++) {
> +		crdp = get_cpu_call_rcu_data(cpu);
> +		if (crdp == NULL)
> +			continue;
> +		set_cpu_call_rcu_data(cpu, NULL);
> +		call_rcu_data_free(crdp);
> +	}
> +}
> +
> +/*
> + * Acquire the call_rcu_mutex in order to ensure that the child sees
> + * all of the call_rcu() data structures in a consistent state.
> + * Suitable for pthread_atfork() and friends.
> + */
> +void call_rcu_before_fork(void)
> +{
> +	call_rcu_lock(&call_rcu_mutex);
> +}
> +
> +/*
> + * Clean up call_rcu data structures in the parent of a successful fork()
> + * that is not followed by exec() in the child.  Suitable for
> + * pthread_atfork() and friends.
> + */
> +void call_rcu_after_fork_parent(void)
> +{
> +	call_rcu_unlock(&call_rcu_mutex);
> +}
> +
> +/*
> + * Clean up call_rcu data structures in the child of a successful fork()
> + * that is not followed by exec().  Suitable for pthread_atfork() and
> + * friends.
> + */
> +void call_rcu_after_fork_child(void)
> +{
> +	struct call_rcu_data *crdp;
> +
> +	/* Re-initialize the mutex. */
> +	if (pthread_mutex_init(&call_rcu_mutex, NULL) != 0) {
> +		perror("pthread_mutex_init");
> +		exit(-1);
> +	}
> +
> +	/*
> +	 * Allocate a new default call_rcu_data structure in order
> +	 * to get a working call_rcu thread to go with it.
> +	 */
> +	default_call_rcu_data = NULL;
> +	(void)get_default_call_rcu_data();
> +
> +	/* Dispose of all of the rest of the call_rcu_data structures. */
> +	while (call_rcu_data_list.next != call_rcu_data_list.prev) {
> +		crdp = cds_list_entry(call_rcu_data_list.prev,
> +				      struct call_rcu_data, list);
> +		if (crdp == default_call_rcu_data)
> +			crdp = cds_list_entry(crdp->list.prev,
> +					      struct call_rcu_data, list);
> +		crdp->flags = URCU_CALL_RCU_STOPPED;
> +		call_rcu_data_free(crdp);
> +	}
> +}
> diff --git a/urcu-call-rcu.c b/urcu-call-rcu.c
> deleted file mode 100644
> index 665f20c..0000000
> --- a/urcu-call-rcu.c
> +++ /dev/null
> @@ -1,620 +0,0 @@
> -/*
> - * urcu-call-rcu.c
> - *
> - * Userspace RCU library - batch memory reclamation with kernel API
> - *
> - * Copyright (c) 2010 Paul E. McKenney <paulmck at linux.vnet.ibm.com>
> - *
> - * This library is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU Lesser General Public
> - * License as published by the Free Software Foundation; either
> - * version 2.1 of the License, or (at your option) any later version.
> - *
> - * This library is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> - * Lesser General Public License for more details.
> - *
> - * You should have received a copy of the GNU Lesser General Public
> - * License along with this library; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> - */
> -
> -#include <stdio.h>
> -#include <pthread.h>
> -#include <signal.h>
> -#include <assert.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <errno.h>
> -#include <poll.h>
> -#include <sys/time.h>
> -#include <syscall.h>
> -#include <unistd.h>
> -
> -#include "config.h"
> -#include "urcu/wfqueue.h"
> -#include "urcu-call-rcu.h"
> -#include "urcu-pointer.h"
> -#include "urcu/list.h"
> -
> -/* Data structure that identifies a call_rcu thread. */
> -
> -struct call_rcu_data {
> -	struct cds_wfq_queue cbs;
> -	unsigned long flags;
> -	pthread_mutex_t mtx;
> -	pthread_cond_t cond;
> -	unsigned long qlen;
> -	pthread_t tid;
> -	struct cds_list_head list;
> -} __attribute__((aligned(CAA_CACHE_LINE_SIZE)));
> -
> -/*
> - * List of all call_rcu_data structures to keep valgrind happy.
> - * Protected by call_rcu_mutex.
> - */
> -
> -CDS_LIST_HEAD(call_rcu_data_list);
> -
> -/* Link a thread using call_rcu() to its call_rcu thread. */
> -
> -static __thread struct call_rcu_data *thread_call_rcu_data;
> -
> -/* Guard call_rcu thread creation. */
> -
> -static pthread_mutex_t call_rcu_mutex = PTHREAD_MUTEX_INITIALIZER;
> -
> -/* If a given thread does not have its own call_rcu thread, this is default. */
> -
> -static struct call_rcu_data *default_call_rcu_data;
> -
> -extern void synchronize_rcu(void);
> -
> -/*
> - * If the sched_getcpu() and sysconf(_SC_NPROCESSORS_CONF) calls are
> - * available, then we can have call_rcu threads assigned to individual
> - * CPUs rather than only to specific threads.
> - */
> -
> -#if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF)
> -
> -/*
> - * Pointer to array of pointers to per-CPU call_rcu_data structures
> - * and # CPUs.
> - */
> -
> -static struct call_rcu_data **per_cpu_call_rcu_data;
> -static long maxcpus;
> -
> -/* Allocate the array if it has not already been allocated. */
> -
> -static void alloc_cpu_call_rcu_data(void)
> -{
> -	struct call_rcu_data **p;
> -	static int warned = 0;
> -
> -	if (maxcpus != 0)
> -		return;
> -	maxcpus = sysconf(_SC_NPROCESSORS_CONF);
> -	if (maxcpus <= 0) {
> -		return;
> -	}
> -	p = malloc(maxcpus * sizeof(*per_cpu_call_rcu_data));
> -	if (p != NULL) {
> -		memset(p, '\0', maxcpus * sizeof(*per_cpu_call_rcu_data));
> -		per_cpu_call_rcu_data = p;
> -	} else {
> -		if (!warned) {
> -			fprintf(stderr, "[error] liburcu: unable to allocate per-CPU pointer array\n");
> -		}
> -		warned = 1;
> -	}
> -}
> -
> -#else /* #if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF) */
> -
> -static const struct call_rcu_data **per_cpu_call_rcu_data = NULL;
> -static const long maxcpus = -1;
> -
> -static void alloc_cpu_call_rcu_data(void)
> -{
> -}
> -
> -static int sched_getcpu(void)
> -{
> -	return -1;
> -}
> -
> -#endif /* #else #if defined(HAVE_SCHED_GETCPU) && defined(HAVE_SYSCONF) */
> -
> -/* Acquire the specified pthread mutex. */
> -
> -static void call_rcu_lock(pthread_mutex_t *pmp)
> -{
> -	if (pthread_mutex_lock(pmp) != 0) {
> -		perror("pthread_mutex_lock");
> -		exit(-1);
> -	}
> -}
> -
> -/* Release the specified pthread mutex. */
> -
> -static void call_rcu_unlock(pthread_mutex_t *pmp)
> -{
> -	if (pthread_mutex_unlock(pmp) != 0) {
> -		perror("pthread_mutex_unlock");
> -		exit(-1);
> -	}
> -}
> -
> -/* This is the code run by each call_rcu thread. */
> -
> -static void *call_rcu_thread(void *arg)
> -{
> -	unsigned long cbcount;
> -	struct cds_wfq_node *cbs;
> -	struct cds_wfq_node **cbs_tail;
> -	struct call_rcu_data *crdp = (struct call_rcu_data *)arg;
> -	struct rcu_head *rhp;
> -
> -	thread_call_rcu_data = crdp;
> -	for (;;) {
> -		if (&crdp->cbs.head != _CMM_LOAD_SHARED(crdp->cbs.tail)) {
> -			while ((cbs = _CMM_LOAD_SHARED(crdp->cbs.head)) == NULL)
> -				poll(NULL, 0, 1);
> -			_CMM_STORE_SHARED(crdp->cbs.head, NULL);
> -			cbs_tail = (struct cds_wfq_node **)
> -				uatomic_xchg(&crdp->cbs.tail, &crdp->cbs.head);
> -			synchronize_rcu();
> -			cbcount = 0;
> -			do {
> -				while (cbs->next == NULL &&
> -				       &cbs->next != cbs_tail)
> -				       	poll(NULL, 0, 1);
> -				if (cbs == &crdp->cbs.dummy) {
> -					cbs = cbs->next;
> -					continue;
> -				}
> -				rhp = (struct rcu_head *)cbs;
> -				cbs = cbs->next;
> -				rhp->func(rhp);
> -				cbcount++;
> -			} while (cbs != NULL);
> -			uatomic_sub(&crdp->qlen, cbcount);
> -		}
> -		if (crdp->flags & URCU_CALL_RCU_STOP)
> -			break;
> -		if (crdp->flags & URCU_CALL_RCU_RT)
> -			poll(NULL, 0, 10);
> -		else {
> -			call_rcu_lock(&crdp->mtx);
> -			_CMM_STORE_SHARED(crdp->flags,
> -				     crdp->flags & ~URCU_CALL_RCU_RUNNING);
> -			if (&crdp->cbs.head ==
> -			    _CMM_LOAD_SHARED(crdp->cbs.tail) &&
> -			    pthread_cond_wait(&crdp->cond, &crdp->mtx) != 0) {
> -				perror("pthread_cond_wait");
> -				exit(-1);
> -			}
> -			_CMM_STORE_SHARED(crdp->flags,
> -				     crdp->flags | URCU_CALL_RCU_RUNNING);
> -			poll(NULL, 0, 10);
> -			call_rcu_unlock(&crdp->mtx);
> -		}
> -	}
> -	call_rcu_lock(&crdp->mtx);
> -	crdp->flags |= URCU_CALL_RCU_STOPPED;
> -	call_rcu_unlock(&crdp->mtx);
> -	return NULL;
> -}
> -
> -/*
> - * Create both a call_rcu thread and the corresponding call_rcu_data
> - * structure, linking the structure in as specified.  Caller must hold
> - * call_rcu_mutex.
> - */
> -
> -static void call_rcu_data_init(struct call_rcu_data **crdpp,
> -			       unsigned long flags)
> -{
> -	struct call_rcu_data *crdp;
> -
> -	crdp = malloc(sizeof(*crdp));
> -	if (crdp == NULL) {
> -		fprintf(stderr, "Out of memory.\n");
> -		exit(-1);
> -	}
> -	memset(crdp, '\0', sizeof(*crdp));
> -	cds_wfq_init(&crdp->cbs);
> -	crdp->qlen = 0;
> -	if (pthread_mutex_init(&crdp->mtx, NULL) != 0) {
> -		perror("pthread_mutex_init");
> -		exit(-1);
> -	}
> -	if (pthread_cond_init(&crdp->cond, NULL) != 0) {
> -		perror("pthread_cond_init");
> -		exit(-1);
> -	}
> -	crdp->flags = flags | URCU_CALL_RCU_RUNNING;
> -	cds_list_add(&crdp->list, &call_rcu_data_list);
> -	cmm_smp_mb();  /* Structure initialized before pointer is planted. */
> -	*crdpp = crdp;
> -	if (pthread_create(&crdp->tid, NULL, call_rcu_thread, crdp) != 0) {
> -		perror("pthread_create");
> -		exit(-1);
> -	}
> -}
> -
> -/*
> - * Return a pointer to the call_rcu_data structure for the specified
> - * CPU, returning NULL if there is none.  We cannot automatically
> - * created it because the platform we are running on might not define
> - * sched_getcpu().
> - */
> -
> -struct call_rcu_data *get_cpu_call_rcu_data(int cpu)
> -{
> -	static int warned = 0;
> -
> -	if (per_cpu_call_rcu_data == NULL)
> -		return NULL;
> -	if (!warned && maxcpus > 0 && (cpu < 0 || maxcpus <= cpu)) {
> -		fprintf(stderr, "[error] liburcu: get CPU # out of range\n");
> -		warned = 1;
> -	}
> -	if (cpu < 0 || maxcpus <= cpu)
> -		return NULL;
> -	return per_cpu_call_rcu_data[cpu];
> -}
> -
> -/*
> - * Return the tid corresponding to the call_rcu thread whose
> - * call_rcu_data structure is specified.
> - */
> -
> -pthread_t get_call_rcu_thread(struct call_rcu_data *crdp)
> -{
> -	return crdp->tid;
> -}
> -
> -/*
> - * Create a call_rcu_data structure (with thread) and return a pointer.
> - */
> -
> -static struct call_rcu_data *__create_call_rcu_data(unsigned long flags)
> -{
> -	struct call_rcu_data *crdp;
> -
> -	call_rcu_data_init(&crdp, flags);
> -	return crdp;
> -}
> -
> -struct call_rcu_data *create_call_rcu_data(unsigned long flags)
> -{
> -	struct call_rcu_data *crdp;
> -
> -	call_rcu_lock(&call_rcu_mutex);
> -	crdp = __create_call_rcu_data(flags);
> -	call_rcu_unlock(&call_rcu_mutex);
> -	return crdp;
> -}
> -
> -/*
> - * Set the specified CPU to use the specified call_rcu_data structure.
> - *
> - * Use NULL to remove a CPU's call_rcu_data structure, but it is
> - * the caller's responsibility to dispose of the removed structure.
> - * Use get_cpu_call_rcu_data() to obtain a pointer to the old structure
> - * (prior to NULLing it out, of course).
> - */
> -
> -int set_cpu_call_rcu_data(int cpu, struct call_rcu_data *crdp)
> -{
> -	int warned = 0;
> -
> -	call_rcu_lock(&call_rcu_mutex);
> -	if (cpu < 0 || maxcpus <= cpu) {
> -		if (!warned) {
> -			fprintf(stderr, "[error] liburcu: set CPU # out of range\n");
> -			warned = 1;
> -		}
> -		call_rcu_unlock(&call_rcu_mutex);
> -		errno = EINVAL;
> -		return -EINVAL;
> -	}
> -	alloc_cpu_call_rcu_data();
> -	call_rcu_unlock(&call_rcu_mutex);
> -	if (per_cpu_call_rcu_data == NULL) {
> -		errno = ENOMEM;
> -		return -ENOMEM;
> -	}
> -	per_cpu_call_rcu_data[cpu] = crdp;
> -	return 0;
> -}
> -
> -/*
> - * Return a pointer to the default call_rcu_data structure, creating
> - * one if need be.  Because we never free call_rcu_data structures,
> - * we don't need to be in an RCU read-side critical section.
> - */
> -
> -struct call_rcu_data *get_default_call_rcu_data(void)
> -{
> -	if (default_call_rcu_data != NULL)
> -		return rcu_dereference(default_call_rcu_data);
> -	call_rcu_lock(&call_rcu_mutex);
> -	if (default_call_rcu_data != NULL) {
> -		call_rcu_unlock(&call_rcu_mutex);
> -		return default_call_rcu_data;
> -	}
> -	call_rcu_data_init(&default_call_rcu_data, 0);
> -	call_rcu_unlock(&call_rcu_mutex);
> -	return default_call_rcu_data;
> -}
> -
> -/*
> - * Return the call_rcu_data structure that applies to the currently
> - * running thread.  Any call_rcu_data structure assigned specifically
> - * to this thread has first priority, followed by any call_rcu_data
> - * structure assigned to the CPU on which the thread is running,
> - * followed by the default call_rcu_data structure.  If there is not
> - * yet a default call_rcu_data structure, one will be created.
> - */
> -struct call_rcu_data *get_call_rcu_data(void)
> -{
> -	int curcpu;
> -	static int warned = 0;
> -
> -	if (thread_call_rcu_data != NULL)
> -		return thread_call_rcu_data;
> -	if (maxcpus <= 0)
> -		return get_default_call_rcu_data();
> -	curcpu = sched_getcpu();
> -	if (!warned && (curcpu < 0 || maxcpus <= curcpu)) {
> -		fprintf(stderr, "[error] liburcu: gcrd CPU # out of range\n");
> -		warned = 1;
> -	}
> -	if (curcpu >= 0 && maxcpus > curcpu &&
> -	    per_cpu_call_rcu_data != NULL &&
> -	    per_cpu_call_rcu_data[curcpu] != NULL)
> -	    	return per_cpu_call_rcu_data[curcpu];
> -	return get_default_call_rcu_data();
> -}
> -
> -/*
> - * Return a pointer to this task's call_rcu_data if there is one.
> - */
> -
> -struct call_rcu_data *get_thread_call_rcu_data(void)
> -{
> -	return thread_call_rcu_data;
> -}
> -
> -/*
> - * Set this task's call_rcu_data structure as specified, regardless
> - * of whether or not this task already had one.  (This allows switching
> - * to and from real-time call_rcu threads, for example.)
> - *
> - * Use NULL to remove a thread's call_rcu_data structure, but it is
> - * the caller's responsibility to dispose of the removed structure.
> - * Use get_thread_call_rcu_data() to obtain a pointer to the old structure
> - * (prior to NULLing it out, of course).
> - */
> -
> -void set_thread_call_rcu_data(struct call_rcu_data *crdp)
> -{
> -	thread_call_rcu_data = crdp;
> -}
> -
> -/*
> - * Create a separate call_rcu thread for each CPU.  This does not
> - * replace a pre-existing call_rcu thread -- use the set_cpu_call_rcu_data()
> - * function if you want that behavior.
> - */
> -
> -int create_all_cpu_call_rcu_data(unsigned long flags)
> -{
> -	int i;
> -	struct call_rcu_data *crdp;
> -	int ret;
> -
> -	call_rcu_lock(&call_rcu_mutex);
> -	alloc_cpu_call_rcu_data();
> -	call_rcu_unlock(&call_rcu_mutex);
> -	if (maxcpus <= 0) {
> -		errno = EINVAL;
> -		return -EINVAL;
> -	}
> -	if (per_cpu_call_rcu_data == NULL) {
> -		errno = ENOMEM;
> -		return -ENOMEM;
> -	}
> -	for (i = 0; i < maxcpus; i++) {
> -		call_rcu_lock(&call_rcu_mutex);
> -		if (get_cpu_call_rcu_data(i)) {
> -			call_rcu_unlock(&call_rcu_mutex);
> -			continue;
> -		}
> -		crdp = __create_call_rcu_data(flags);
> -		if (crdp == NULL) {
> -			call_rcu_unlock(&call_rcu_mutex);
> -			errno = ENOMEM;
> -			return -ENOMEM;
> -		}
> -		call_rcu_unlock(&call_rcu_mutex);
> -		if ((ret = set_cpu_call_rcu_data(i, crdp)) != 0) {
> -			/* FIXME: Leaks crdp for now. */
> -			return ret; /* Can happen on race. */
> -		}
> -	}
> -	return 0;
> -}
> -
> -/*
> - * Wake up the call_rcu thread corresponding to the specified
> - * call_rcu_data structure.
> - */
> -static void wake_call_rcu_thread(struct call_rcu_data *crdp)
> -{
> -	if (!(_CMM_LOAD_SHARED(crdp->flags) & URCU_CALL_RCU_RT)) {
> -		call_rcu_lock(&crdp->mtx);
> -		if (!(_CMM_LOAD_SHARED(crdp->flags) & URCU_CALL_RCU_RUNNING)) {
> -			if (pthread_cond_signal(&crdp->cond) != 0) {
> -				perror("pthread_cond_signal");
> -				exit(-1);
> -			}
> -		}
> -		call_rcu_unlock(&crdp->mtx);
> -	}
> -}
> -
> -/*
> - * Schedule a function to be invoked after a following grace period.
> - * This is the only function that must be called -- the others are
> - * only present to allow applications to tune their use of RCU for
> - * maximum performance.
> - *
> - * Note that unless a call_rcu thread has not already been created,
> - * the first invocation of call_rcu() will create one.  So, if you
> - * need the first invocation of call_rcu() to be fast, make sure
> - * to create a call_rcu thread first.  One way to accomplish this is
> - * "get_call_rcu_data();", and another is create_all_cpu_call_rcu_data().
> - */
> -
> -void call_rcu(struct rcu_head *head,
> -	      void (*func)(struct rcu_head *head))
> -{
> -	struct call_rcu_data *crdp;
> -
> -	cds_wfq_node_init(&head->next);
> -	head->func = func;
> -	crdp = get_call_rcu_data();
> -	cds_wfq_enqueue(&crdp->cbs, &head->next);
> -	uatomic_inc(&crdp->qlen);
> -	wake_call_rcu_thread(crdp);
> -}
> -
> -/*
> - * Free up the specified call_rcu_data structure, terminating the
> - * associated call_rcu thread.  The caller must have previously
> - * removed the call_rcu_data structure from per-thread or per-CPU
> - * usage.  For example, set_cpu_call_rcu_data(cpu, NULL) for per-CPU
> - * call_rcu_data structures or set_thread_call_rcu_data(NULL) for
> - * per-thread call_rcu_data structures.
> - *
> - * We silently refuse to free up the default call_rcu_data structure
> - * because that is where we put any leftover callbacks.  Note that
> - * the possibility of self-spawning callbacks makes it impossible
> - * to execute all the callbacks in finite time without putting any
> - * newly spawned callbacks somewhere else.  The "somewhere else" of
> - * last resort is the default call_rcu_data structure.
> - *
> - * We also silently refuse to free NULL pointers.  This simplifies
> - * the calling code.
> - */
> -void call_rcu_data_free(struct call_rcu_data *crdp)
> -{
> -	struct cds_wfq_node *cbs;
> -	struct cds_wfq_node **cbs_tail;
> -	struct cds_wfq_node **cbs_endprev;
> -
> -	if (crdp == NULL || crdp == default_call_rcu_data) {
> -		return;
> -	}
> -	if ((crdp->flags & URCU_CALL_RCU_STOPPED) == 0) {
> -		call_rcu_lock(&crdp->mtx);
> -		crdp->flags |= URCU_CALL_RCU_STOP;
> -		call_rcu_unlock(&crdp->mtx);
> -		wake_call_rcu_thread(crdp);
> -		while ((crdp->flags & URCU_CALL_RCU_STOPPED) == 0)
> -			poll(NULL, 0, 1);
> -	}
> -	if (&crdp->cbs.head != _CMM_LOAD_SHARED(crdp->cbs.tail)) {
> -		while ((cbs = _CMM_LOAD_SHARED(crdp->cbs.head)) == NULL)
> -			poll(NULL, 0, 1);
> -		_CMM_STORE_SHARED(crdp->cbs.head, NULL);
> -		cbs_tail = (struct cds_wfq_node **)
> -			uatomic_xchg(&crdp->cbs.tail, &crdp->cbs.head);
> -		cbs_endprev = (struct cds_wfq_node **)
> -			uatomic_xchg(&default_call_rcu_data, cbs_tail);
> -		*cbs_endprev = cbs;
> -		uatomic_add(&default_call_rcu_data->qlen,
> -			    uatomic_read(&crdp->qlen));
> -		cds_list_del(&crdp->list);
> -		free(crdp);
> -	}
> -}
> -
> -/*
> - * Clean up all the per-CPU call_rcu threads.
> - */
> -void free_all_cpu_call_rcu_data(void)
> -{
> -	int cpu;
> -	struct call_rcu_data *crdp;
> -
> -	if (maxcpus <= 0)
> -		return;
> -	for (cpu = 0; cpu < maxcpus; cpu++) {
> -		crdp = get_cpu_call_rcu_data(cpu);
> -		if (crdp == NULL)
> -			continue;
> -		set_cpu_call_rcu_data(cpu, NULL);
> -		call_rcu_data_free(crdp);
> -	}
> -}
> -
> -/*
> - * Acquire the call_rcu_mutex in order to ensure that the child sees
> - * all of the call_rcu() data structures in a consistent state.
> - * Suitable for pthread_atfork() and friends.
> - */
> -void call_rcu_before_fork(void)
> -{
> -	call_rcu_lock(&call_rcu_mutex);
> -}
> -
> -/*
> - * Clean up call_rcu data structures in the parent of a successful fork()
> - * that is not followed by exec() in the child.  Suitable for
> - * pthread_atfork() and friends.
> - */
> -void call_rcu_after_fork_parent(void)
> -{
> -	call_rcu_unlock(&call_rcu_mutex);
> -}
> -
> -/*
> - * Clean up call_rcu data structures in the child of a successful fork()
> - * that is not followed by exec().  Suitable for pthread_atfork() and
> - * friends.
> - */
> -void call_rcu_after_fork_child(void)
> -{
> -	struct call_rcu_data *crdp;
> -
> -	/* Re-initialize the mutex. */
> -	if (pthread_mutex_init(&call_rcu_mutex, NULL) != 0) {
> -		perror("pthread_mutex_init");
> -		exit(-1);
> -	}
> -
> -	/*
> -	 * Allocate a new default call_rcu_data structure in order
> -	 * to get a working call_rcu thread to go with it.
> -	 */
> -	default_call_rcu_data = NULL;
> -	(void)get_default_call_rcu_data();
> -
> -	/* Dispose of all of the rest of the call_rcu_data structures. */
> -	while (call_rcu_data_list.next != call_rcu_data_list.prev) {
> -		crdp = cds_list_entry(call_rcu_data_list.prev,
> -				      struct call_rcu_data, list);
> -		if (crdp == default_call_rcu_data)
> -			crdp = cds_list_entry(crdp->list.prev,
> -					      struct call_rcu_data, list);
> -		crdp->flags = URCU_CALL_RCU_STOPPED;
> -		call_rcu_data_free(crdp);
> -	}
> -}
> diff --git a/urcu-map.h b/urcu-map.h
> new file mode 100644
> index 0000000..eccaac2
> --- /dev/null
> +++ b/urcu-map.h
> @@ -0,0 +1,117 @@
> +#ifndef _URCU_MAP_H
> +#define _URCU_MAP_H
> +
> +/*
> + * urcu-map.h
> + *
> + * Userspace RCU header -- name mapping to allow multiple flavors to be
> + * used in the same executable.
> + *
> + * Copyright (c) 2009 Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> + * Copyright (c) 2009 Paul E. McKenney, IBM Corporation.
> + *
> + * LGPL-compatible code should include this header with :
> + *
> + * #define _LGPL_SOURCE
> + * #include <urcu.h>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + * IBM's contributions to this file may be relicensed under LGPLv2 or later.
> + */
> +
> +/* Mapping macros to allow multiple flavors in a single binary. */
> +
> +#ifdef RCU_MEMBARRIER
> +
> +#define rcu_read_lock			rcu_read_lock_memb
> +#define _rcu_read_lock			_rcu_read_lock_memb
> +#define rcu_read_unlock			rcu_read_unlock_memb
> +#define _rcu_read_unlock		_rcu_read_unlock_memb
> +#define rcu_register_thread		rcu_register_thread_memb
> +#define rcu_unregister_thread		rcu_unregister_thread_memb
> +#define rcu_init			rcu_init_memb
> +#define rcu_exit			rcu_exit_memb
> +#define synchronize_rcu			synchronize_rcu_memb
> +#define rcu_reader			rcu_reader_memb
> +#define rcu_gp_ctr			rcu_gp_ctr_memb
> +
> +#define get_cpu_call_rcu_data		get_cpu_call_rcu_data_memb
> +#define get_call_rcu_thread		get_call_rcu_thread_memb
> +#define create_call_rcu_data		create_call_rcu_data_memb
> +#define set_cpu_call_rcu_data		set_cpu_call_rcu_data_memb
> +#define get_default_call_rcu_data	get_default_call_rcu_data_memb
> +#define get_call_rcu_data		get_call_rcu_data_memb
> +#define get_thread_call_rcu_data	get_thread_call_rcu_data_memb
> +#define set_thread_call_rcu_data	set_thread_call_rcu_data_memb
> +#define create_all_cpu_call_rcu_data	create_all_cpu_call_rcu_data_memb
> +#define free_all_cpu_call_rcu_data	free_all_cpu_call_rcu_data_memb
> +#define call_rcu			call_rcu_memb
> +
> +#elif defined(RCU_SIGNAL)
> +
> +#define rcu_read_lock			rcu_read_lock_sig
> +#define _rcu_read_lock			_rcu_read_lock_sig
> +#define rcu_read_unlock			rcu_read_unlock_sig
> +#define _rcu_read_unlock		_rcu_read_unlock_sig
> +#define rcu_register_thread		rcu_register_thread_sig
> +#define rcu_unregister_thread		rcu_unregister_thread_sig
> +#define rcu_init			rcu_init_sig
> +#define rcu_exit			rcu_exit_sig
> +#define synchronize_rcu			synchronize_rcu_sig
> +#define rcu_reader			rcu_reader_sig
> +#define rcu_gp_ctr			rcu_gp_ctr_sig
> +
> +#define get_cpu_call_rcu_data		get_cpu_call_rcu_data_sig
> +#define get_call_rcu_thread		get_call_rcu_thread_sig
> +#define create_call_rcu_data		create_call_rcu_data_sig
> +#define set_cpu_call_rcu_data		set_cpu_call_rcu_data_sig
> +#define get_default_call_rcu_data	get_default_call_rcu_data_sig
> +#define get_call_rcu_data		get_call_rcu_data_sig
> +#define get_thread_call_rcu_data	get_thread_call_rcu_data_sig
> +#define set_thread_call_rcu_data	set_thread_call_rcu_data_sig
> +#define create_all_cpu_call_rcu_data	create_all_cpu_call_rcu_data_sig
> +#define free_all_cpu_call_rcu_data	free_all_cpu_call_rcu_data_sig
> +#define call_rcu			call_rcu_sig
> +
> +#elif defined(RCU_MB)
> +
> +#define rcu_read_lock			rcu_read_lock_mb
> +#define _rcu_read_lock			_rcu_read_lock_mb
> +#define rcu_read_unlock			rcu_read_unlock_mb
> +#define _rcu_read_unlock		_rcu_read_unlock_mb
> +#define rcu_register_thread		rcu_register_thread_mb
> +#define rcu_unregister_thread		rcu_unregister_thread_mb
> +#define rcu_init			rcu_init_mb
> +#define rcu_exit			rcu_exit_mb
> +#define synchronize_rcu			synchronize_rcu_mb
> +#define rcu_reader			rcu_reader_mb
> +#define rcu_gp_ctr			rcu_gp_ctr_mb
> +
> +#define get_cpu_call_rcu_data		get_cpu_call_rcu_data_mb
> +#define get_call_rcu_thread		get_call_rcu_thread_mb
> +#define create_call_rcu_data		create_call_rcu_data_mb
> +#define set_cpu_call_rcu_data		set_cpu_call_rcu_data_mb
> +#define get_default_call_rcu_data	get_default_call_rcu_data_mb
> +#define get_call_rcu_data		get_call_rcu_data_mb
> +#define get_thread_call_rcu_data	get_thread_call_rcu_data_mb
> +#define set_thread_call_rcu_data	set_thread_call_rcu_data_mb
> +#define create_all_cpu_call_rcu_data	create_all_cpu_call_rcu_data_mb
> +#define free_all_cpu_call_rcu_data	free_all_cpu_call_rcu_data_mb
> +#define call_rcu			call_rcu_mb
> +
> +#endif
> +
> +#endif /* _URCU_MAP_H */
> diff --git a/urcu-qsbr-map.h b/urcu-qsbr-map.h
> new file mode 100644
> index 0000000..2bce1b6
> --- /dev/null
> +++ b/urcu-qsbr-map.h
> @@ -0,0 +1,63 @@
> +#ifndef _URCU_QSBR_MAP_H
> +#define _URCU_QSBR_MAP_H
> +
> +/*
> + * urcu-map.h
> + *
> + * Userspace RCU header -- name mapping to allow multiple flavors to be
> + * used in the same executable.
> + *
> + * Copyright (c) 2009 Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> + * Copyright (c) 2009 Paul E. McKenney, IBM Corporation.
> + *
> + * LGPL-compatible code should include this header with :
> + *
> + * #define _LGPL_SOURCE
> + * #include <urcu.h>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + * IBM's contributions to this file may be relicensed under LGPLv2 or later.
> + */
> +
> +/* Mapping macros to allow multiple flavors in a single binary. */
> +
> +#define rcu_read_lock			rcu_read_lock_qsbr
> +#define _rcu_read_lock			_rcu_read_lock_qsbr
> +#define rcu_read_unlock			rcu_read_unlock_qsbr
> +#define _rcu_read_unlock		_rcu_read_unlock_qsbr
> +#define rcu_quiescent_state		rcu_quiescent_state_qsbr
> +#define _rcu_quiescent_state		_rcu_quiescent_state_qsbr
> +#define rcu_thread_offline		rcu_thread_offline_qsbr
> +#define rcu_thread_online		rcu_thread_online_qsbr
> +#define rcu_register_thread		rcu_register_thread_qsbr
> +#define rcu_unregister_thread		rcu_unregister_thread_qsbr
> +#define rcu_exit			rcu_exit_qsbr
> +#define synchronize_rcu			synchronize_rcu_qsbr
> +#define rcu_reader			rcu_reader_qsbr
> +#define rcu_gp_ctr			rcu_gp_ctr_qsbr
> +
> +#define get_cpu_call_rcu_data		get_cpu_call_rcu_data_qsbr
> +#define get_call_rcu_thread		get_call_rcu_thread_qsbr
> +#define create_call_rcu_data		create_call_rcu_data_qsbr
> +#define set_cpu_call_rcu_data		set_cpu_call_rcu_data_qsbr
> +#define get_default_call_rcu_data	get_default_call_rcu_data_qsbr
> +#define get_call_rcu_data		get_call_rcu_data_qsbr
> +#define get_thread_call_rcu_data	get_thread_call_rcu_data_qsbr
> +#define set_thread_call_rcu_data	set_thread_call_rcu_data_qsbr
> +#define create_all_cpu_call_rcu_data	create_all_cpu_call_rcu_data_qsbr
> +#define call_rcu			call_rcu_qsbr
> +
> +#endif /* _URCU_QSBR_MAP_H */
> diff --git a/urcu-qsbr.c b/urcu-qsbr.c
> index 69effd5..8dcad33 100644
> --- a/urcu-qsbr.c
> +++ b/urcu-qsbr.c
> @@ -32,6 +32,8 @@
>  #include <errno.h>
>  #include <poll.h>
>  
> +#include "urcu-qsbr-map.h"
> +
>  #define BUILD_QSBR_LIB
>  #include "urcu-qsbr-static.h"
>  /* Do not #define _LGPL_SOURCE to ensure we can emit the wrapper symbols */
> @@ -121,10 +123,11 @@ static void update_counter_and_wait(void)
>  #endif	/* !(CAA_BITS_PER_LONG < 64) */
>  
>  	/*
> -	 * Must commit rcu_gp_ctr update to memory before waiting for quiescent
> -	 * state. Failure to do so could result in the writer waiting forever
> -	 * while new readers are always accessing data (no progress). Enforce
> -	 * compiler-order of store to rcu_gp_ctr before load rcu_reader ctr.
> +	 * Must commit rcu_gp_ctr update to memory before waiting for
> +	 * quiescent state. Failure to do so could result in the writer
> +	 * waiting forever while new readers are always accessing data
> +	 * (no progress). Enforce compiler-order of store to rcu_gp_ctr
> +	 * before load rcu_reader ctr.
>  	 */
>  	cmm_barrier();
>  
> @@ -194,8 +197,8 @@ void synchronize_rcu(void)
>  
>  	/*
>  	 * Mark the writer thread offline to make sure we don't wait for
> -	 * our own quiescent state. This allows using synchronize_rcu() in
> -	 * threads registered as readers.
> +	 * our own quiescent state. This allows using synchronize_rcu()
> +	 * in threads registered as readers.
>  	 */
>  	if (was_online)
>  		CMM_STORE_SHARED(rcu_reader.ctr, 0);
> @@ -212,10 +215,11 @@ void synchronize_rcu(void)
>  
>  	/*
>  	 * Must finish waiting for quiescent state for parity 0 before
> -	 * committing next rcu_gp_ctr update to memory. Failure to do so could
> -	 * result in the writer waiting forever while new readers are always
> -	 * accessing data (no progress).  Enforce compiler-order of load
> -	 * rcu_reader ctr before store to rcu_gp_ctr.
> +	 * committing next rcu_gp_ctr update to memory. Failure to
> +	 * do so could result in the writer waiting forever while new
> +	 * readers are always accessing data (no progress).  Enforce
> +	 * compiler-order of load rcu_reader ctr before store to
> +	 * rcu_gp_ctr.
>  	 */
>  	cmm_barrier();
>  
> @@ -238,7 +242,8 @@ out:
>  	 * freed.
>  	 */
>  	if (was_online)
> -		_CMM_STORE_SHARED(rcu_reader.ctr, CMM_LOAD_SHARED(rcu_gp_ctr));
> +		_CMM_STORE_SHARED(rcu_reader.ctr,
> +				  CMM_LOAD_SHARED(rcu_gp_ctr));
>  	cmm_smp_mb();
>  }
>  #else /* !(CAA_BITS_PER_LONG < 64) */
> @@ -250,8 +255,8 @@ void synchronize_rcu(void)
>  
>  	/*
>  	 * Mark the writer thread offline to make sure we don't wait for
> -	 * our own quiescent state. This allows using synchronize_rcu() in
> -	 * threads registered as readers.
> +	 * our own quiescent state. This allows using synchronize_rcu()
> +	 * in threads registered as readers.
>  	 */
>  	cmm_smp_mb();
>  	if (was_online)
> @@ -265,7 +270,8 @@ out:
>  	mutex_unlock(&rcu_gp_lock);
>  
>  	if (was_online)
> -		_CMM_STORE_SHARED(rcu_reader.ctr, CMM_LOAD_SHARED(rcu_gp_ctr));
> +		_CMM_STORE_SHARED(rcu_reader.ctr,
> +				  CMM_LOAD_SHARED(rcu_gp_ctr));
>  	cmm_smp_mb();
>  }
>  #endif  /* !(CAA_BITS_PER_LONG < 64) */
> @@ -326,3 +332,5 @@ void rcu_exit(void)
>  {
>  	assert(cds_list_empty(&registry));
>  }
> +
> +#include "urcu-call-rcu-impl.h"
> diff --git a/urcu-qsbr.h b/urcu-qsbr.h
> index 116fd77..984d70c 100644
> --- a/urcu-qsbr.h
> +++ b/urcu-qsbr.h
> @@ -40,6 +40,8 @@
>  extern "C" {
>  #endif 
>  
> +#include "urcu-qsbr-map.h"
> +
>  /*
>   * Important !
>   *
> @@ -62,15 +64,15 @@ extern "C" {
>   * rcu_read_unlock()
>   *
>   * Mark the beginning and end of a read-side critical section.
> - * DON'T FORGET TO USE rcu_register_thread/rcu_unregister_thread() FOR EACH
> - * THREAD WITH READ-SIDE CRITICAL SECTION.
> + * DON'T FORGET TO USE rcu_register_thread/rcu_unregister_thread()
> + * FOR EACH THREAD WITH READ-SIDE CRITICAL SECTION.
>   */
> -#define rcu_read_lock()		_rcu_read_lock()
> -#define rcu_read_unlock()	_rcu_read_unlock()
> +#define rcu_read_lock_qsbr()		_rcu_read_lock()
> +#define rcu_read_unlock_qsbr()		_rcu_read_unlock()
>  
> -#define rcu_quiescent_state()	_rcu_quiescent_state()
> -#define rcu_thread_offline()	_rcu_thread_offline()
> -#define rcu_thread_online()	_rcu_thread_online()
> +#define rcu_quiescent_state_qsbr()	_rcu_quiescent_state()
> +#define rcu_thread_offline_qsbr()	_rcu_thread_offline()
> +#define rcu_thread_online_qsbr()	_rcu_thread_online()
>  
>  #else /* !_LGPL_SOURCE */
>  
> @@ -122,4 +124,6 @@ extern void rcu_unregister_thread(void);
>  }
>  #endif
>  
> +#include "urcu-call-rcu.h"
> +
>  #endif /* _URCU_QSBR_H */
> diff --git a/urcu.c b/urcu.c
> index e529ac0..4ee9e3b 100644
> --- a/urcu.c
> +++ b/urcu.c
> @@ -33,6 +33,8 @@
>  #include <errno.h>
>  #include <poll.h>
>  
> +#include "urcu-map.h"
> +
>  #include "urcu-static.h"
>  /* Do not #define _LGPL_SOURCE to ensure we can emit the wrapper symbols */
>  #include "urcu.h"
> @@ -428,4 +430,7 @@ void rcu_exit(void)
>  	assert(act.sa_sigaction == sigrcu_handler);
>  	assert(cds_list_empty(&registry));
>  }
> +
>  #endif /* #ifdef RCU_SIGNAL */
> +
> +#include "urcu-call-rcu-impl.h"
> diff --git a/urcu.h b/urcu.h
> index c6c54e7..00d9b75 100644
> --- a/urcu.h
> +++ b/urcu.h
> @@ -43,12 +43,14 @@
>  extern "C" {
>  #endif 
>  
> +#include "urcu-map.h"
> +
>  /*
>   * Important !
>   *
>   * Each thread containing read-side critical sections must be registered
> - * with rcu_register_thread() before calling rcu_read_lock().
> - * rcu_unregister_thread() should be called before the thread exits.
> + * with rcu_register_thread_mb() before calling rcu_read_lock_mb().
> + * rcu_unregister_thread_mb() should be called before the thread exits.
>   */
>  
>  #ifdef _LGPL_SOURCE
> @@ -68,8 +70,16 @@ extern "C" {
>   * DON'T FORGET TO USE RCU_REGISTER/UNREGISTER_THREAD() FOR EACH THREAD WITH
>   * READ-SIDE CRITICAL SECTION.
>   */
> -#define rcu_read_lock()		_rcu_read_lock()
> -#define rcu_read_unlock()	_rcu_read_unlock()
> +#ifdef RCU_MEMBARRIER
> +#define rcu_read_lock_memb()		_rcu_read_lock()
> +#define rcu_read_unlock_memb()		_rcu_read_unlock()
> +#elif defined(RCU_SIGNAL)
> +#define rcu_read_lock_sig()		_rcu_read_lock()
> +#define rcu_read_unlock_sig()		_rcu_read_unlock()
> +#elif defined(RCU_MB)
> +#define rcu_read_lock_mb()		_rcu_read_lock()
> +#define rcu_read_unlock_mb()		_rcu_read_unlock()
> +#endif
>  
>  #else /* !_LGPL_SOURCE */
>  
> @@ -100,4 +110,6 @@ extern void rcu_init(void);
>  }
>  #endif
>  
> +#include "urcu-call-rcu.h"
> +
>  #endif /* _URCU_H */
> -- 
> 1.7.3.2
> 

-- 
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com




More information about the lttng-dev mailing list