[ltt-dev] [UST PATCH] Set the exit status of ustctl main function v3

[Mathieu Desnoyers]

* David Goulet (david.goulet at polymtl.ca) wrote:
> Each possible command checks the return value and, on error,
> print on stderr and set the retval. This makes ustctl return
> an EXIT_FAILURE on any command that fails.
> 
> Signed-off-by: David Goulet <david.goulet at polymtl.ca>

Acked-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>

> ---
>  ustctl/ustctl.c |   56 +++++++++++++++++++++++++++++++++++++++++++-----------
>  1 files changed, 44 insertions(+), 12 deletions(-)
> 
> diff --git a/ustctl/ustctl.c b/ustctl/ustctl.c
> index d290975..35bea7a 100644
> --- a/ustctl/ustctl.c
> +++ b/ustctl/ustctl.c
> @@ -170,6 +170,7 @@ int main(int argc, char *argv[])
>  {
>  	pid_t *pidit;
>  	int result;
> +	int retval = EXIT_SUCCESS;
>  	char *tmp;
>  	struct ust_opts opts;
>  
> @@ -222,6 +223,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_create_trace(*pidit);
>  				if (result) {
>  					ERR("error while trying to create trace with PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				break;
> @@ -230,6 +232,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_start_trace(*pidit);
>  				if (result) {
>  					ERR("error while trying to for trace with PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				break;
> @@ -238,6 +241,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_stop_trace(*pidit);
>  				if (result) {
>  					ERR("error while trying to stop trace for PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				break;
> @@ -246,6 +250,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_destroy_trace(*pidit);
>  				if (result) {
>  					ERR("error while trying to destroy trace with PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				break;
> @@ -253,9 +258,8 @@ int main(int argc, char *argv[])
>  			case LIST_MARKERS:
>  				cmsf = NULL;
>  				if (ustcmd_get_cmsf(&cmsf, *pidit)) {
> -					fprintf(stderr,
> -						"error while trying to list markers for"
> -						" PID %u\n", (unsigned int) *pidit);
> +					ERR("error while trying to list markers for PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				unsigned int i = 0;
> @@ -273,26 +277,49 @@ int main(int argc, char *argv[])
>  				break;
>  
>  			case ENABLE_MARKER:
> -				if(opts.regex)
> -					ustcmd_set_marker_state(opts.regex, 1, *pidit);
> +				if (opts.regex) {
> +					if (ustcmd_set_marker_state(opts.regex, 1, *pidit)) {
> +						ERR("error while trying to enable marker %s with PID %u\n",
> +								opts.regex, (unsigned int) *pidit);
> +						retval = EXIT_FAILURE;
> +					}
> +				}
>  				break;
>  			case DISABLE_MARKER:
> -				if(opts.regex)
> -					ustcmd_set_marker_state(opts.regex, 0, *pidit);
> +				if (opts.regex) {
> +					if (ustcmd_set_marker_state(opts.regex, 0, *pidit)) {
> +						ERR("error while trying to disable marker %s with PID %u\n",
> +								opts.regex, (unsigned int) *pidit);
> +						retval = EXIT_FAILURE;
> +					}
> +				}
>  				break;
>  
>  			case SET_SUBBUF_SIZE:
> -				ustcmd_set_subbuf_size(opts.regex, *pidit);
> +				if (opts.regex) {
> +					if (ustcmd_set_subbuf_size(opts.regex, *pidit)) {
> +						ERR("error while trying to set the size of subbuffers with PID %u\n",
> +								(unsigned int) *pidit);
> +						retval = EXIT_FAILURE;
> +					}
> +				}
>  				break;
>  
>  			case SET_SUBBUF_NUM:
> -				ustcmd_set_subbuf_num(opts.regex, *pidit);
> +				if (opts.regex) {
> +					if (ustcmd_set_subbuf_num(opts.regex, *pidit)) {
> +						ERR("error while trying to set the number of subbuffers with PID %u\n",
> +								(unsigned int) *pidit);
> +						retval = EXIT_FAILURE;
> +					}
> +				}
>  				break;
>  
>  			case GET_SUBBUF_SIZE:
>  				result = ustcmd_get_subbuf_size(opts.regex, *pidit);
>  				if (result == -1) {
>  					ERR("error while trying to get_subuf_size with PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  
> @@ -303,6 +330,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_get_subbuf_num(opts.regex, *pidit);
>  				if (result == -1) {
>  					ERR("error while trying to get_subuf_num with PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  
> @@ -313,7 +341,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_alloc_trace(*pidit);
>  				if (result) {
>  					ERR("error while trying to alloc trace with PID %u\n", (unsigned int) *pidit);
> -					break;
> +					retval = EXIT_FAILURE;
>  				}
>  				break;
>  
> @@ -321,6 +349,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_get_sock_path(&tmp, *pidit);
>  				if (result) {
>  					ERR("error while trying to get sock path for PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  					break;
>  				}
>  				printf("the socket path is %s\n", tmp);
> @@ -331,6 +360,7 @@ int main(int argc, char *argv[])
>  				result = ustcmd_set_sock_path(opts.regex, *pidit);
>  				if (result) {
>  					ERR("error while trying to set sock path for PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  				}
>  				break;
>  
> @@ -338,12 +368,14 @@ int main(int argc, char *argv[])
>  				result = ustcmd_force_switch(*pidit);
>  				if (result) {
>  					ERR("error while trying to force switch for PID %u\n", (unsigned int) *pidit);
> +					retval = EXIT_FAILURE;
>  				}
>  				break;
>  
>  			default:
>  				ERR("unknown command\n");
> -			break;
> +				retval = EXIT_FAILURE;
> +				break;
>  		}
>  
>  		pidit++;
> @@ -356,6 +388,6 @@ int main(int argc, char *argv[])
>  		free(opts.regex);
>  	}
>  
> -	return 0;
> +	return retval;
>  }
>  
> -- 
> 1.7.2.3
> 
> 
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
> 

-- 
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com