[ltt-dev] LLTng probes

[Jyotiswarup Raiturkar]

Ok I think I'm beginning to understand the scheme. For a tracepoint like
irq_exit, DECLARE_MARKER_TP() defines an corresponding marker. And when
set_marker() is called, the probe callback mentioned in
DEFINE_MARKER_TP() gets attached to the tracepoint. The tracepoint
itself is hit when the trace_* (trace_irq_exit) is called by the
module/subsystem performing the trace. Is this understanding correct?

Couple of more questions though:
- Why is this better/"optimized" instead of just calling
register_trace_* (register_trace_irq_exit )?
- set_marker() is called by marker_update_probe_range() which is called
when probe functions are registered/unregistered, and modules are
loaded/unloaded. But you said below that this is called when markers are
'enabled'. Does registering a probe function, enable a marker?

I'm trying to attach custom probes, to the kernel markers and
tracepoints; hence all the questions.

Thanks
Jyotiswarup

-----Original Message-----
From: Mathieu Desnoyers [mailto:compudj at krystal.dyndns.org] 
Sent: Thursday, May 20, 2010 7:34 PM
To: Jyotiswarup Raiturkar
Cc: ltt-dev at lists.casi.polymtl.ca
Subject: Re: [ltt-dev] LLTng probes

probe_irq_exit is the callback that the tracepoint will call.

So we have, at the moment, for "optimized probes" (written by hand, not
serialized dynamically):

tracepoint -> probe_irq_exit -> ltt_specialized_trace()

These "optimized probes" skip the marker code entirely. They are only
tied to markers for the event type definitions.

Thanks,

Mathieu


* Jyotiswarup Raiturkar (Jyotiswarup.Raiturkar at arm.com) wrote:
> >> The probes are connected to the tracepoints with: kernel:marker.c:
> set_marker()
> 
> Actually my question was where is the actual trace out call made? For
> example for the tracepoint defined by DEFINE_TRACE(irq_exit), the
trace
> out call is trace_irq_exit(). Similarly there is a trace marker called
> DEFINE_MARKER_TP() for irq_exit :
> Kernel-trace.c : 
> 	DEFINE_MARKER_TP(kernel, irq_exit, irq_exit, probe_irq_exit,
> "handled #1u%u");
> 
> But I don't see how this marker is actually hit during execution. What
> is the call similar to trace_irq_exit() for the Tracepoint?
> 
> Thanks
> Jyotiswarup Raiturkar
> 
> -----Original Message-----
> From: Mathieu Desnoyers [mailto:compudj at krystal.dyndns.org] 
> Sent: Wednesday, May 19, 2010 8:00 PM
> To: Jyotiswarup Raiturkar
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: Re: [ltt-dev] LLTng probes
> 
> * Jyotiswarup Raiturkar (Jyotiswarup.Raiturkar at arm.com) wrote:
> > Hello
> > 
> >  
> > 
> > I'm looking at LTTng working inside the kernel, and trying to
> understand
> > the instrumentation.
> > 
> >  
> > 
> > However, I am not able to see how the DEFINE_MARKER_TP() macros and
> > other probe_* functions in kernel-trace.c are actually used . As I
> > understand it, to make the actual trace, modules would have to call
> the
> > probe_* functions; yet I'm not able to locate these calls.
> 
> The probes are connected to the tracepoints with:
> 
> kernel:marker.c: set_marker()
> 
>                      ret = tracepoint_probe_register_noupdate(
>                                 elem->tp_name,
>                                 elem->tp_cb);
> 
> Which is called when a marker is enabled. The markers are listed in a
> table which is defined by the DEFINE_MARKER_TP() macros.
> 
> Thanks,
> 
> Mathieu
> 
> > 
> >  
> > 
> > Thanks
> > 
> > Jyoti
> > 
> > -- 
> > IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose
the
> contents to any other person, use it for any purpose, or store or copy
> the information in any medium.  Thank you.
> 
> > _______________________________________________
> > ltt-dev mailing list
> > ltt-dev at lists.casi.polymtl.ca
> > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
> 
> 
> -- 
> Mathieu Desnoyers
> Operating System Efficiency R&D Consultant
> EfficiOS Inc.
> http://www.efficios.com
> -- 
> IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended
recipient, please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store or copy
the information in any medium.  Thank you.
> 

-- 
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
-- 
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.