[ltt-dev] cli/sti vs local_cmpxchg and local_add_return

[Mathieu Desnoyers]

* David Miller (davem at davemloft.net) wrote:
> From: Mathieu Desnoyers <mathieu.desnoyers at polymtl.ca>
> Date: Mon, 16 Mar 2009 21:32:20 -0400
> 
> > If some of you would be kind enough to run my test module provided below
> > and provide the results of these tests on a recent kernel (2.6.26~2.6.29
> > should be good) along with their cpuinfo, I would greatly appreciate.
> 
> Here's sparc64, but cycles is always computed as zero.
> 
> Probably that's because get_cycles() on sparc64 counts system
> bus clock cycles, not CPU cycles, and you the loop iteration
> isn't expensive enough to get a system clock tick in.
> 
> This is a dual UltraSPARC-IIIi at 1.2 GHz
> 

Hi David,

Thanks for running those tests. Actually, I did not expect good results
for sparc64 because the local_t primitives map to atomic_t. Looking at
sparc atomic_64.h, I notice that all atomic operations except cmpxchg
are done through function calls even when those functions only contain
few instructions.  Is there any particular reason for that ? These
function calls can be quite costly. We could easily inline those.

And to "unleash" the full power of local_t, we should see if there are
variants of the atomic operations which are safe only on UP and if there
are some memory barriers currently embedded in the atomic_t ops we could
remove in a local_t version. Actually, all the
BACKOFF_SETUP/BACKOFF_SPIN is specific to SMP, and therefore the local_t
version probably does not need that because it touches specifically
per-cpu data. That could give very interesting results.

The reason why the results shows 0 cycles per loop is just because there
is less that a bus clock cycle per loop. But the total time (in bus
cycles) for the whole 20000 cycles gives us equivalent information.

Mathieu

> [1052598.484452] test init
> [1052598.486230] test results: time for baseline
> [1052598.487878] number of loops: 20000
> [1052598.489485] total time: 752
> [1052598.491061] -> baseline takes 0 cycles
> [1052598.492649] test end
> [1052598.494874] test results: time for locked cmpxchg
> [1052598.496460] number of loops: 20000
> [1052598.498005] total time: 7879
> [1052598.499521] -> locked cmpxchg takes 0 cycles
> [1052598.501060] test end
> [1052598.503194] test results: time for non locked cmpxchg
> [1052598.504733] number of loops: 20000
> [1052598.506213] total time: 7879
> [1052598.507722] -> non locked cmpxchg takes 0 cycles
> [1052598.509229] test end
> [1052598.511347] test results: time for locked add return
> [1052598.512821] number of loops: 20000
> [1052598.514265] total time: 8254
> [1052598.515682] -> locked add return takes 0 cycles
> [1052598.517130] test end
> [1052598.519427] test results: time for non locked add return
> [1052598.520850] number of loops: 20000
> [1052598.522230] total time: 11259
> [1052598.523561] -> non locked add return takes 0 cycles
> [1052598.524939] test end
> [1052598.526393] test results: time for enabling interrupts (STI)
> [1052598.527767] number of loops: 20000
> [1052598.529085] total time: 1877
> [1052598.530373] -> enabling interrupts (STI) takes 0 cycles
> [1052598.531713] test end
> [1052598.533240] test results: time for disabling interrupts (CLI)
> [1052598.534594] number of loops: 20000
> [1052598.535892] total time: 3189
> [1052598.537189] -> disabling interrupts (CLI) takes 0 cycles
> [1052598.538551] test end
> [1052598.540176] test results: time for disabling/enabling interrupts (STI/CLI)
> [1052598.541579] number of loops: 20000
> [1052598.542900] total time: 3940
> [1052598.544207] -> enabling/disabling interrupts (STI/CLI) takes 0 cycles
> [1052598.545595] test end
> 

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68