[ltt-dev] LTTng. Strings with missing characters (ash)
Akyurek, Ali (EXT)
ali.akyurek.ext at siemens.com
Tue Dec 23 14:18:10 EST 2008
Hello, but i see like below, it seems also a newline in the mail:
IFS=$'
'
Is it correct?
-----Ursprüngliche Nachricht-----
Von: Mathieu Desnoyers [mailto:compudj at krystal.dyndns.org]
Gesendet: Dienstag, 23. Dezember 2008 20:02
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: Re: [ltt-dev] LTTng. Strings with missing characters (ash)
OK, it looks like ash does not interpret \n as a newline.
replacing the IFS= line by
IFS=$'
'
seems to work both in bash and ash (a CTRL-V enter), but seems hackish.
Any better way to express a portable newline for both ash and bash ?
Mathieu
* Akyurek, Ali (EXT) (ali.akyurek.ext at siemens.com) wrote:
> Also here is my ash configuration in busybox. Maybe it is useful.
>
> And again thanks for the help and great work.
>
> Ali Akyurek
>
> #
> # Ash Shell Options
> #
> CONFIG_ASH_JOB_CONTROL=y
> # CONFIG_ASH_READ_NCHARS is not set
> # CONFIG_ASH_READ_TIMEOUT is not set
> CONFIG_ASH_ALIAS=y
> CONFIG_ASH_MATH_SUPPORT=y
> CONFIG_ASH_MATH_SUPPORT_64=y
> # CONFIG_ASH_GETOPTS is not set
> CONFIG_ASH_BUILTIN_ECHO=y
> CONFIG_ASH_BUILTIN_TEST=y
> # CONFIG_ASH_CMDCMD is not set
> # CONFIG_ASH_MAIL is not set
> CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
> # CONFIG_ASH_RANDOM_SUPPORT is not set
> # CONFIG_ASH_EXPAND_PRMT is not set
> # CONFIG_HUSH is not set
> # CONFIG_HUSH_HELP is not set
> # CONFIG_HUSH_INTERACTIVE is not set
> # CONFIG_HUSH_JOB is not set
> # CONFIG_HUSH_TICK is not set
> # CONFIG_HUSH_IF is not set
> # CONFIG_HUSH_LOOPS is not set
> # CONFIG_LASH is not set
> # CONFIG_MSH is not set
>
> -----Ursprüngliche Nachricht-----
> Von: Mathieu Desnoyers [mailto:compudj at krystal.dyndns.org <mailto:compudj at krystal.dyndns.org> ]
> Gesendet: Dienstag, 23. Dezember 2008 19:02
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: Re: [ltt-dev] LTTng. Strings with missing characters (ash)
>
> OK, I can reproduce the problem :
>
> ash ltt-armall
> (or busybox ash ltt-armall) :
>
>
> Connecting all markers
> Connecting fd_state file_descriptor
> fs buffer_wait_e
> Connecting d
> fs buffer_wait_start
> fs close
> fs exec
> fs ioctl
> fs llseek
> fs lseek
> fs ope
> Connecting
> fs pollfd
> fs pread64
> fs pwrite64
> fs read
> fs readv
> fs select
> fs write
> fs writev
> global_state statedump_e
> Connecting d
> i
> Connecting put i
> Connecting put_eve
> Connecting t
> ipc call
> ipc msg_create
> ipc sem_create
> ....
>
> I'll try to figure out why IFS= behaves differently in ash.
>
> Mathieu
>
>
> * Mathieu Desnoyers (compudj at krystal.dyndns.org) wrote:
> > And also, what type of shell are you using (type, version) ?
> >
> > Mathieu
> >
> > * Mathieu Desnoyers (mathieu.desnoyers at polymtl.ca) wrote:
> > > (adding the ltt-dev list in CC, so other developers can have a look at
> > > it and help reproducing this ARM problem)
> > >
> > > Hrm, weird,
> > >
> > > So /proc/ltt outputs correct strings, but ltt-armall output is messed
> > > up.
> > >
> > > Can you do the following ?
> > >
> > > which ltt-armall
> > >
> > > and
> > >
> > > cat `which ltt-armall`
> > >
> > > I guess it has something to do with the IFS=$'\n' line in the script,
> > > which works on x86, but maybe not on arm for some reason.
> > >
> > > Also, can you give me the output after this sequence of commands ?
> > > ltt-armall
> > > lttctl -C -w /tmp/trace trace
> > > find /mnt/debugfs/ltt (where /mnt/debugfs is the path to your debugfs
> > > mount)
> > >
> > > Thanks
> > >
> > > Mathieu
> > >
> > > * Akyurek, Ali (EXT) (ali.akyurek.ext at siemens.com) wrote:
> > > >
> > > > Hello,
> > > >
> > > > Strings are seem to be cutted off at 'n' character.
> > > >
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Mathieu Desnoyers [mailto:mathieu.desnoyers at polymtl.ca <mailto:mathieu.desnoyers at polymtl.ca> ]
> > > > Gesendet: Montag, 22. Dezember 2008 19:51
> > > > An: Akyurek, Ali (EXT)
> > > > Betreff: Re: LTTng. Strings with missing characters
> > > >
> > > >
> > > > Hrm,
> > > >
> > > > What do you get if you do :
> > > >
> > > > cat /proc/ltt ?
> > > >
> > > > And what is your kernel config ?
> > > >
> > > > Mathieu
> > > >
> > > > * Akyurek, Ali (EXT) (ali.akyurek.ext at siemens.com) wrote:
> > > > >
> > > > >
> > > > >
> > > > > Hello again,
> > > > >
> > > > > I've installed latest versions LTTng 0.70, lttcontrol 0.61.
> > > > >
> > > > > When i run armall, in the output, i see strings with missing characters like:
> > > > >
> > > > > ...
> > > > > Connecting el irq_exit
> > > > > ker
> > > > > Connecting el kthread_create
> > > > > ker
> > > > > Connecting el kthread_stop
> > > > > ker
> > > > > Connecting el kthread_stop_ret
> > > > > ker
> > > > > ...
> > > > >
> > > > >
> > > > > Also after i'm done with tracing, the trace output directory looks like:
> > > > >
> > > > > drwxr-xr-x 2 root 0 0 Jan 1 02:12 .
> > > > > drwxr-xr-x 3 root 0 0 Jan 1 01:55 ..
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 _page_e_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 d_sig_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 dle_fault_e_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 el_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 etif_state_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 etwork_ip_i_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 etwork_ipv4_i_0
> > > > > -rwxr-xr-x 1 root 0 65536 Jan 1 01:55 fd_state_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 metadata_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 mm_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 put_0
> > > > > -rwxr-xr-x 1 root 0 262144 Jan 1 01:55 put_eve_0
> > > > >
> > > > > Do you have an idea about it?
> > > > >
> > > > > Thanks.
> > > > >
> > > > >
> > > > > -----Ursprüngliche Nachricht-----
> > > > > Von: Mathieu Desnoyers [mailto:mathieu.desnoyers at polymtl.ca <mailto:mathieu.desnoyers at polymtl.ca> ]
> > > > > Gesendet: Freitag, 19. Dezember 2008 18:17
> > > > > An: Akyurek, Ali (EXT)
> > > > > Betreff: Re: arm userspace tracing
> > > > >
> > > > > Hello !
> > > > >
> > > > > Well, it's your lucky day I guess. I just added a neat feature to LTTng
> > > > > which will help a great deal sending a subset of the data types
> > > > > supported (a simple string) into the trace buffers from userspace _very_
> > > > > easily. It's not integrated with the event management, so I would not
> > > > > add this to application in production (because it would add overhead
> > > > > even when tracing is disabled). With the latest LTTng, all you have to
> > > > > do is :
> > > > >
> > > > > modprobe ltt-userspace-event
> > > > > lttctl -C -w /tmp/trace trace (note : the arguments recently changed)
> > > > > run stuff...
> > > > > echo "Some event happened!" > /mnt/debugfs/ltt/write_event
> > > > > lttctl -D trace
> > > > > looking specifically for the event :
> > > > > lttv -e userspace.event -m textDump -t /tmp/trace
> > > > >
> > > > > So basically, you can look for your own string into the trace stream as
> > > > > a starting point. This is portable, so should work on ARM without any
> > > > > problem.
> > > > >
> > > > > There is still a lot of work to do on ARM to have per-site activation of
> > > > > tracepoints like we currently have in the kernel, but at least this
> > > > > solution gives us _something_. It's just that it's always enabled.
> > > > >
> > > > > * Akyurek, Ali (EXT) (ali.akyurek.ext at siemens.com) wrote:
> > > > > > Hello Mr.Desnoyers,
> > > > > >
> > > > > > First of all, thanks for the great work you've done.
> > > > > > What i wonder is that is it possible to trace user space in arm architecture?
> > > > > > In the quick start document it writes :
> > > > > >
> > > > > > "Get the latest markers-userspace-*.tar.bz2 and see the Makefile and examples. It
> > > > > > allows inserting markers in executables and libraries, currently only on x86_32
> > > > > > and x86_64."
> > > > > >
> > > > > > But ,then i've seen a patch in http://ltt.polymtl.ca/packages/markers-user/ <http://ltt.polymtl.ca/packages/markers-user/> called lttng-userspace-tracing-arm.patch <http://ltt.polymtl.ca/packages/markers-user/lttng-userspace-tracing-arm.patch <http://ltt.polymtl.ca/packages/markers-user/lttng-userspace-tracing-arm.patch> > .
> > > > > >
> > > > >
> > > > > That was a complete syscall implementation at some point, which could be
> > > > > ported to the new infrastructure, but note that the current
> > > > > markers-userspace-*.tar.bz2 code also needs linker script modification.
> > > > >
> > > > > Mathieu
> > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > Mit freundlichem Gruss / Best Regards
> > > > > > Ali Günhan Akyürek
> > > > > > evoline TR
> > > > > >
> > > > >
> > > > > --
> > > > > Mathieu Desnoyers
> > > > > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
> > > > >
> > > >
> > > > --
> > > > Mathieu Desnoyers
> > > > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
> > > >
> > >
> > > --
> > > Mathieu Desnoyers
> > > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
> > >
> > > _______________________________________________
> > > ltt-dev mailing list
> > > ltt-dev at lists.casi.polymtl.ca
> > > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev <http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev>
> > >
> >
> > --
> > Mathieu Desnoyers
> > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
> >
> > _______________________________________________
> > ltt-dev mailing list
> > ltt-dev at lists.casi.polymtl.ca
> > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev <http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev>
> >
>
> --
> Mathieu Desnoyers
> OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
More information about the lttng-dev
mailing list