[ltt-dev] Newibie questions: How to run LTT

[Akyurek, Ali (EXT)]

Hi, but i don't know anymore to do.:(

Is relayfs module or builtin to the kernel?

If it is module, are you sure it is loaded succesfully?

-----Ursprüngliche Nachricht-----
Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com] 
Gesendet: Dienstag, 23. Dezember 2008 19:52
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: RE: [ltt-dev] Newibie questions: How to run LTT

HI,
Thanks for helping me out, It still fails:

CTS:>mount -t relayfs relayfs /mnt/relay
mount: Mounting relayfs on /mnt/relay failed: No such device


> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext at siemens.com]
> Sent: Tuesday, December 23, 2008 10:38 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> 
> 
> Hi, Could you please try this one:
> 
> mount -t relayfs relayfs /mnt/relay
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:30
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> 
> HI,
> Yes, but I get the following error:
> 
> CTS:>mount -t relayfs nodev /mnt/relayfs
> mount: Mounting nodev on /mnt/relayfs failed: No such device
> 
> 
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext at siemens.com]
> > Sent: Tuesday, December 23, 2008 10:24 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> >
> > ________________________________
> >
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > An: ltt-dev at lists.casi.polymtl.ca
> > Betreff: [ltt-dev] Newibie questions: How to run LTT
> >
> >
> >
> > Hi All,
> >
> > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> enable
> > the LTT (older version) on our embedded system.
> >
> > Reading documentation it say the first thing I need to do is:
> >
> > mkdir /mnt/relayfs
> >
> > mount -t relayfs nodev /mnt/redlayfs.
> >
> >
> >
> > It fails, is there any better documentation on what to do with this
> older
> > verison please?
> >
> >
> >
> > Thanks,
> >
> > B.